Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

1 files changed, 11 insertions, 9 deletions

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index f8652ef25f8..d0296a94c47 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -60,7 +60,6 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ		0x02
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
@@ -105,12 +104,9 @@ static struct platform_device serial_device = {
 		.platform_data = serial_platform_data,
 	},
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	&serial_device,
-#endif
 };
 
 static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
@@ -188,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev)
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -206,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -223,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
@@ -298,7 +299,8 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
 	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-	.init_machine = eukrea_cpuimx51_init,
 	.timer = &mxc_timer,
+	.init_machine = eukrea_cpuimx51_init,
 MACHINE_END