ARM i.MX: Merge i.MX5 support into mach-imx

This patch moves the contents of arch/arm/mach-mx5 to arch/arm/mach-imx
and adjusts the Makefile/Kconfig entries in a way that it's possible
to compile i.MX5 together with i.MX3/6.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>

1 files changed, 0 insertions, 85 deletions

diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
deleted file mode 100644
index 144ebebc4a6..00000000000
--- a/arch/arm/mach-mx5/system.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include "crm_regs.h"
-
-/* set cpu low power mode before WFI instruction. This function is called
-  * mx5 because it can be used for mx50, mx51, and mx53.*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
-{
-	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
-	u32 empgc0, empgc1;
-	int stop_mode = 0;
-
-	/* always allow platform to issue a deep sleep mode request */
-	plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
-	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
-	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
-	arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
-	empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
-	empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
-
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-	case STOP_POWER_OFF:
-		plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
-			    | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
-		if (mode == WAIT_UNCLOCKED_POWER_OFF) {
-			ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
-			ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
-			ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
-			stop_mode = 0;
-		} else {
-			ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
-			ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
-			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
-			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
-			stop_mode = 1;
-		}
-		arm_srpgcr |= MXC_SRPGCR_PCR;
-
-		if (tzic_enable_wake(1) != 0)
-			return;
-		break;
-	case STOP_POWER_ON:
-		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
-		break;
-	default:
-		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
-		return;
-	}
-
-	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
-	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
-	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
-	/* Enable NEON SRPG for all but MX50TO1.0. */
-	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
-		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
-
-	if (stop_mode) {
-		empgc0 |= MXC_SRPGCR_PCR;
-		empgc1 |= MXC_SRPGCR_PCR;
-
-		__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
-	}
-}