Merge branch 'kbuild/rc-fixes' into kbuild/kconfig

We need to revert the temporary hack in 71ebc01, hence the merge.

10 files changed, 819 insertions, 3 deletions

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 1576d51e676..0848db5dd36 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -15,4 +15,31 @@ config MACH_MX51_BABBAGE
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index bf23f869ef5..86c66e7f52f 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,4 +6,6 @@
 obj-y   := cpu.o mm.o clock-mx51.o devices.o
 
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-
+obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
new file mode 100644
index 00000000000..623607a20f5
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define CPUIMX51_USBH1_STP	(0*32 + 27)
+#define CPUIMX51_QUARTA_GPIO	(2*32 + 28)
+#define CPUIMX51_QUARTB_GPIO	(2*32 + 25)
+#define CPUIMX51_QUARTC_GPIO	(2*32 + 26)
+#define CPUIMX51_QUARTD_GPIO	(2*32 + 27)
+#define CPUIMX51_QUARTA_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
+#define CPUIMX51_QUARTB_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
+#define CPUIMX51_QUARTC_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
+#define CPUIMX51_QUARTD_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
+#define CPUIMX51_QUART_XTAL	14745600
+#define CPUIMX51_QUART_REGSHIFT	17
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
+		.irq = CPUIMX51_QUARTA_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
+		.irq = CPUIMX51_QUARTB_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
+		.irq = CPUIMX51_QUARTC_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
+		.irq = CPUIMX51_QUARTD_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	&serial_device,
+#endif
+};
+
+static struct pad_desc eukrea_cpuimx51_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* I2C2 */
+	MX51_PAD_GPIO_1_2__I2C2_SCL,
+	MX51_PAD_GPIO_1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* QUART IRQ */
+	MX51_PAD_NANDF_D15__GPIO_3_25,
+	MX51_PAD_NANDF_D14__GPIO_3_26,
+	MX51_PAD_NANDF_D13__GPIO_3_27,
+	MX51_PAD_NANDF_D12__GPIO_3_28,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init eukrea_cpuimx51_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
+					ARRAY_SIZE(eukrea_cpuimx51_pads));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
+	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
+	gpio_free(CPUIMX51_QUARTA_GPIO);
+	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
+	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
+	gpio_free(CPUIMX51_QUARTB_GPIO);
+	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
+	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
+	gpio_free(CPUIMX51_QUARTC_GPIO);
+	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
+	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
+	gpio_free(CPUIMX51_QUARTD_GPIO);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data);
+	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
+	eukrea_mbimx51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = eukrea_cpuimx51_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
new file mode 100644
index 00000000000..f95c2fd9466
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx51.h>
+#include <mach/imx-uart.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices.h"
+
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+
+static struct pad_desc mx51_3ds_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	MX51_PAD_EIM_D25__UART2_CTS,
+	MX51_PAD_EIM_D26__UART2_RTS,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_EIM_D24__UART3_CTS,
+	MX51_PAD_EIM_D27__UART3_RTS,
+
+	/* CPLD PARENT IRQ PIN */
+	MX51_PAD_GPIO_1_6__GPIO_1_6,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+	MX51_PAD_KEY_COL4__KEY_COL4,
+	MX51_PAD_KEY_COL5__KEY_COL5,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE)
+static int mx51_3ds_board_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_F1),
+	KEY(0, 4, KEY_UP),
+	KEY(0, 5, KEY_F2),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+	KEY(1, 4, KEY_SELECT),
+	KEY(1, 5, KEY_RIGHT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_F3),
+	KEY(2, 4, KEY_DOWN),
+	KEY(2, 5, KEY_F4),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_OK),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+	KEY(3, 4, KEY_MENU),
+	KEY(3, 5, KEY_BACK)
+};
+
+static struct matrix_keymap_data mx51_3ds_map_data = {
+	.keymap		= mx51_3ds_board_keymap,
+	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
+};
+
+static void mxc_init_keypad(void)
+{
+	mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+}
+#else
+static inline void mxc_init_keypad(void)
+{
+}
+#endif
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
+					ARRAY_SIZE(mx51_3ds_pads));
+	mxc_init_imx_uart();
+
+	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debugboard failed, all "
+				    "devices on the board are unusable.\n");
+
+	mxc_init_keypad();
+}
+
+static void __init mx51_3ds_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_3ds_timer_init,
+};
+
+MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index ed885f9d7b7..6e384d92e62 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -21,6 +22,7 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
 #include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
@@ -64,6 +66,18 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_EIM_D27__UART3_RTS,
 	MX51_PAD_EIM_D24__UART3_CTS,
 
+	/* I2C1 */
+	MX51_PAD_EIM_D16__I2C1_SDA,
+	MX51_PAD_EIM_D19__I2C1_SCL,
+
+	/* I2C2 */
+	MX51_PAD_KEY_COL4__I2C2_SCL,
+	MX51_PAD_KEY_COL5__I2C2_SDA,
+
+	/* HSI2C */
+	MX51_PAD_I2C1_CLK__HSI2C_CLK,
+	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
 	MX51_PAD_USBH1_DIR__USBH1_DIR,
@@ -78,7 +92,7 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO1_7,
+	MX51_PAD_GPIO_1_7__GPIO_1_7,
 };
 
 /* Serial ports */
@@ -99,6 +113,14 @@ static inline void mxc_init_imx_uart(void)
 }
 #endif /* SERIAL_IMX */
 
+static struct imxi2c_platform_data babbage_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct imxi2c_platform_data babbage_hsi2c_data = {
+	.bitrate = 400000,
+};
+
 static int gpio_usbh1_active(void)
 {
 	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
@@ -230,6 +252,10 @@ static void __init mxc_board_init(void)
 	mxc_init_imx_uart();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
+	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+
 	if (otg_mode_host)
 		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
 	else {
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index d9f612d3370..6af69def357 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -758,6 +758,10 @@ static struct clk gpt_32k_clk = {
 	.parent = &ckil_clk,
 };
 
+static struct clk kpp_clk = {
+	.id = 0,
+};
+
 #define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
@@ -798,6 +802,14 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
+/* I2C */
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+
 /* FEC */
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
@@ -815,12 +827,16 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 7130449aacd..1920ff4963b 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -93,6 +93,64 @@ struct platform_device mxc_fec_device = {
 	.resource = mxc_fec_resources,
 };
 
+static struct resource mxc_i2c0_resources[] = {
+	{
+		.start = MX51_I2C1_BASE_ADDR,
+		.end = MX51_I2C1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_I2C1,
+		.end = MX51_MXC_INT_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+	.resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+	{
+		.start = MX51_I2C2_BASE_ADDR,
+		.end = MX51_I2C2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_I2C2,
+		.end = MX51_MXC_INT_I2C2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+	.resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_hsi2c_resources[] = {
+	{
+		.start = MX51_HSI2C_DMA_BASE_ADDR,
+		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_HS_I2C,
+		.end = MX51_MXC_INT_HS_I2C,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_hsi2c_device = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
+	.resource = mxc_hsi2c_resources
+};
+
 static u64 usb_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource usbotg_resources[] = {
@@ -168,34 +226,57 @@ struct platform_device mxc_wdt = {
 	.resource = mxc_wdt_resources,
 };
 
+static struct resource mxc_kpp_resources[] = {
+	{
+		.start = MX51_MXC_INT_KPP,
+		.end = MX51_MXC_INT_KPP,
+		.flags = IORESOURCE_IRQ,
+	} , {
+		.start = MX51_KPP_BASE_ADDR,
+		.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "imx-keypad",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_kpp_resources),
+	.resource = mxc_kpp_resources,
+};
+
 static struct mxc_gpio_port mxc_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
 		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO1_LOW,
+		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START
 	},
 	{
 		.chip.label = "gpio-1",
 		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO2_LOW,
+		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
 	},
 	{
 		.chip.label = "gpio-2",
 		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO3_LOW,
+		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
 	},
 	{
 		.chip.label = "gpio-3",
 		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO4_LOW,
+		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init imx51_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index c879ae71cd5..e509cfaad1d 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -6,3 +6,7 @@ extern struct platform_device mxc_usbdr_host_device;
 extern struct platform_device mxc_usbh1_device;
 extern struct platform_device mxc_usbdr_udc_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_hsi2c_device;
+extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
new file mode 100644
index 00000000000..ffa93d1d6ef
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -0,0 +1,200 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/leds.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+#define MBIMX51_TSC2007_GPIO	(2*32 + 30)
+#define MBIMX51_TSC2007_IRQ	(MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
+#define MBIMX51_LED0		(2*32 + 5)
+#define MBIMX51_LED1		(2*32 + 6)
+#define MBIMX51_LED2		(2*32 + 7)
+#define MBIMX51_LED3		(2*32 + 8)
+
+static struct gpio_led mbimx51_leds[] = {
+	{
+		.name			= "led0",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED0,
+	},
+	{
+		.name			= "led1",
+		.default_trigger	= "nand-disk",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED1,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED2,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "default-on",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED3,
+	},
+};
+
+static struct gpio_led_platform_data mbimx51_leds_info = {
+	.leds		= mbimx51_leds,
+	.num_leds	= ARRAY_SIZE(mbimx51_leds),
+};
+
+static struct platform_device mbimx51_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mbimx51_leds_info,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mbimx51_leds_gpio,
+};
+
+static struct pad_desc mbimx51_pads[] = {
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+
+	/* TSC2007 IRQ */
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* LEDS */
+	MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mbimx51_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_UP),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_RIGHT),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+};
+
+static struct matrix_keymap_data mbimx51_map_data = {
+	.keymap		= mbimx51_keymap,
+	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
+};
+
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
+}
+
+struct tsc2007_platform_data tsc2007_data = {
+	.model = 2007,
+	.x_plate_ohms = 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
+};
+
+static struct i2c_board_info mbimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.irq  = MBIMX51_TSC2007_IRQ,
+		.platform_data = &tsc2007_data,
+	},
+};
+
+/*
+ * baseboard initialization.
+ */
+void __init eukrea_mbimx51_baseboard_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
+					ARRAY_SIZE(mbimx51_pads));
+
+	mxc_register_device(&mxc_uart_device1, NULL);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+	gpio_request(MBIMX51_LED0, "LED0");
+	gpio_direction_output(MBIMX51_LED0, 1);
+	gpio_free(MBIMX51_LED0);
+	gpio_request(MBIMX51_LED1, "LED1");
+	gpio_direction_output(MBIMX51_LED1, 1);
+	gpio_free(MBIMX51_LED1);
+	gpio_request(MBIMX51_LED2, "LED2");
+	gpio_direction_output(MBIMX51_LED2, 1);
+	gpio_free(MBIMX51_LED2);
+	gpio_request(MBIMX51_LED3, "LED3");
+	gpio_direction_output(MBIMX51_LED3, 1);
+	gpio_free(MBIMX51_LED3);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+
+	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
+	gpio_direction_input(MBIMX51_TSC2007_GPIO);
+	set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+	i2c_register_board_info(1, mbimx51_i2c_devices,
+				ARRAY_SIZE(mbimx51_i2c_devices));
+}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index b7677ef80cc..bc3f30db8d9 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -65,6 +65,8 @@ void __init mx51_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx51_register_gpios(void);
+
 void __init mx51_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -80,4 +82,5 @@ void __init mx51_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
+	imx51_register_gpios();
 }