diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-26 12:42:29 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-26 12:42:29 -0700 |
| commit | 27953437059c64d14086196eb96f43c78caa9db3 (patch) | |
| tree | 0cfd5fb21262a6db3de0c64462847b4c0c43e9df /arch/arm/mach-mxs | |
| parent | 2c757fd5d1a92086f225a75a8fac7cab242d11b0 (diff) | |
| parent | 3c0dec5f58b3c7b3627715126d1bf9b030a076f0 (diff) | |
Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc clock driver changes from Olof Johansson:
"The new clock subsystem was merged in linux-3.4 without any users,
this now moves the first three platforms over to it: imx, mxs and
spear.
The series also contains the changes for the clock subsystem itself,
since Mike preferred to have it together with the platforms that
require these changes, in order to avoid interdependencies and
conflicts."
Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).
* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
clk: Provide dummy clk_unregister()
SPEAr: Update defconfigs
SPEAr: Add SMI NOR partition info in dts files
SPEAr: Switch to common clock framework
SPEAr: Call clk_prepare() before calling clk_enable
SPEAr: clk: Add General Purpose Timer Synthesizer clock
SPEAr: clk: Add Fractional Synthesizer clock
SPEAr: clk: Add Auxiliary Synthesizer clock
SPEAr: clk: Add VCO-PLL Synthesizer clock
SPEAr: Add DT bindings for SPEAr's timer
ARM i.MX: remove now unused clock files
ARM: i.MX6: implement clocks using common clock framework
ARM i.MX35: implement clocks using common clock framework
ARM i.MX5: implement clocks using common clock framework
ARM: Kirkwood: Replace clock gating
ARM: Orion: Audio: Add clk/clkdev support
ARM: Orion: PCIE: Add support for clk
ARM: Orion: XOR: Add support for clk
ARM: Orion: CESA: Add support for clk
...
Diffstat (limited to 'arch/arm/mach-mxs')
| -rw-r--r-- | arch/arm/mach-mxs/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/clock-mx23.c | 536 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/clock-mx28.c | 803 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/clock.c | 211 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/include/mach/clock.h | 62 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/include/mach/common.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mach-mx28evk.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/regs-clkctrl-mx23.h | 331 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/regs-clkctrl-mx28.h | 486 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/system.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/timer.c | 11 |
11 files changed, 13 insertions, 2456 deletions
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 908bf9a567f..6ce21a26412 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,12 +1,9 @@ # Common support -obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_SOC_IMX23) += clock-mx23.o -obj-$(CONFIG_SOC_IMX28) += clock-mx28.o - obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c deleted file mode 100644 index e3ac52c3401..00000000000 --- a/arch/arm/mach-mxs/clock-mx23.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/clkdev.h> - -#include <asm/clkdev.h> -#include <asm/div64.h> - -#include <mach/mx23.h> -#include <mach/common.h> -#include <mach/clock.h> - -#include "regs-clkctrl-mx23.h" - -#define CLKCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR) -#define DIGCTRL_BASE_ADDR MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR) - -#define PARENT_RATE_SHIFT 8 - -static int _raw_clk_enable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); - } - - return 0; -} - -static void _raw_clk_disable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - } -} - -/* - * ref_xtal_clk - */ -static unsigned long ref_xtal_clk_get_rate(struct clk *clk) -{ - return 24000000; -} - -static struct clk ref_xtal_clk = { - .get_rate = ref_xtal_clk_get_rate, -}; - -/* - * pll_clk - */ -static unsigned long pll_clk_get_rate(struct clk *clk) -{ - return 480000000; -} - -static int pll_clk_enable(struct clk *clk) -{ - __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER | - BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET); - - /* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer - * and is incorrect (excessive). Per definition of the PLLCTRL0 - * POWER field, waiting at least 10us. - */ - udelay(10); - - return 0; -} - -static void pll_clk_disable(struct clk *clk) -{ - __raw_writel(BM_CLKCTRL_PLLCTRL0_POWER | - BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR); -} - -static struct clk pll_clk = { - .get_rate = pll_clk_get_rate, - .enable = pll_clk_enable, - .disable = pll_clk_disable, - .parent = &ref_xtal_clk, -}; - -/* - * ref_clk - */ -#define _CLK_GET_RATE_REF(name, sr, ss) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - unsigned long parent_rate; \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \ - div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \ - parent_rate = clk_get_rate(clk->parent); \ - \ - return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \ - div, PARENT_RATE_SHIFT); \ -} - -_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU) -_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI) -_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX) -_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO) - -#define _DEFINE_CLOCK_REF(name, er, es) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \ - .get_rate = name##_get_rate, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = &pll_clk, \ - } - -_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU); -_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI); -_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX); -_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO); - -/* - * General clocks - * - * clk_get_rate - */ -static unsigned long rtc_clk_get_rate(struct clk *clk) -{ - /* ref_xtal_clk is implemented as the only parent */ - return clk_get_rate(clk->parent) / 768; -} - -static unsigned long clk32k_clk_get_rate(struct clk *clk) -{ - return clk->parent->get_rate(clk->parent) / 750; -} - -#define _CLK_GET_RATE(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - if (clk->parent == &ref_xtal_clk) \ - div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \ - BP_CLKCTRL_##rs##_DIV_XTAL; \ - else \ - div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \ - BP_CLKCTRL_##rs##_DIV_##rs; \ - \ - if (!div) \ - return -EINVAL; \ - \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE(cpu_clk, CPU) -_CLK_GET_RATE(emi_clk, EMI) - -#define _CLK_GET_RATE1(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \ - \ - if (!div) \ - return -EINVAL; \ - \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE1(hbus_clk, HBUS) -_CLK_GET_RATE1(xbus_clk, XBUS) -_CLK_GET_RATE1(ssp_clk, SSP) -_CLK_GET_RATE1(gpmi_clk, GPMI) -_CLK_GET_RATE1(lcdif_clk, PIX) - -#define _CLK_GET_RATE_STUB(name) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - return clk_get_rate(clk->parent); \ -} - -_CLK_GET_RATE_STUB(uart_clk) -_CLK_GET_RATE_STUB(audio_clk) -_CLK_GET_RATE_STUB(pwm_clk) - -/* - * clk_set_rate - */ -static int cpu_clk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg, bm_busy, div_max, d, f, div, frac; - unsigned long diff, parent_rate, calc_rate; - - parent_rate = clk_get_rate(clk->parent); - - if (clk->parent == &ref_xtal_clk) { - div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL; - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; - div = DIV_ROUND_UP(parent_rate, rate); - if (div == 0 || div > div_max) - return -EINVAL; - } else { - div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU; - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; - rate >>= PARENT_RATE_SHIFT; - parent_rate >>= PARENT_RATE_SHIFT; - diff = parent_rate; - div = frac = 1; - for (d = 1; d <= div_max; d++) { - f = parent_rate * 18 / d / rate; - if ((parent_rate * 18 / d) % rate) - f++; - if (f < 18 || f > 35) - continue; - - calc_rate = parent_rate * 18 / f / d; - if (calc_rate > rate) - continue; - - if (rate - calc_rate < diff) { - frac = f; - div = d; - diff = rate - calc_rate; - } - - if (diff == 0) - break; - } - - if (diff == parent_rate) - return -EINVAL; - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - reg &= ~BM_CLKCTRL_FRAC_CPUFRAC; - reg |= frac; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - } - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); - reg &= ~BM_CLKCTRL_CPU_DIV_CPU; - reg |= div << BP_CLKCTRL_CPU_DIV_CPU; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); - - mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy); - - return 0; -} - -#define _CLK_SET_RATE(name, dr) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u32 reg, div_max, div; \ - unsigned long parent_rate; \ - \ - parent_rate = clk_get_rate(clk->parent); \ - div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ - \ - div = DIV_ROUND_UP(parent_rate, rate); \ - if (div == 0 || div > div_max) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - reg &= ~BM_CLKCTRL_##dr##_DIV; \ - reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - \ - mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY); \ - return 0; \ -} - -_CLK_SET_RATE(xbus_clk, XBUS) -_CLK_SET_RATE(ssp_clk, SSP) -_CLK_SET_RATE(gpmi_clk, GPMI) -_CLK_SET_RATE(lcdif_clk, PIX) - -#define _CLK_SET_RATE_STUB(name) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - return -EINVAL; \ -} - -_CLK_SET_RATE_STUB(emi_clk) -_CLK_SET_RATE_STUB(uart_clk) -_CLK_SET_RATE_STUB(audio_clk) -_CLK_SET_RATE_STUB(pwm_clk) -_CLK_SET_RATE_STUB(clk32k_clk) - -/* - * clk_set_parent - */ -#define _CLK_SET_PARENT(name, bit) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) { \ - __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ - clk->parent = parent; \ - } \ - \ - return 0; \ -} - -_CLK_SET_PARENT(cpu_clk, CPU) -_CLK_SET_PARENT(emi_clk, EMI) -_CLK_SET_PARENT(ssp_clk, SSP) -_CLK_SET_PARENT(gpmi_clk, GPMI) -_CLK_SET_PARENT(lcdif_clk, PIX) - -#define _CLK_SET_PARENT_STUB(name) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) \ - return -EINVAL; \ - else \ - return 0; \ -} - -_CLK_SET_PARENT_STUB(uart_clk) -_CLK_SET_PARENT_STUB(audio_clk) -_CLK_SET_PARENT_STUB(pwm_clk) -_CLK_SET_PARENT_STUB(clk32k_clk) - -/* - * clk definition - */ -static struct clk cpu_clk = { - .get_rate = cpu_clk_get_rate, - .set_rate = cpu_clk_set_rate, - .set_parent = cpu_clk_set_parent, - .parent = &ref_cpu_clk, -}; - -static struct clk hbus_clk = { - .get_rate = hbus_clk_get_rate, - .parent = &cpu_clk, -}; - -static struct clk xbus_clk = { - .get_rate = xbus_clk_get_rate, - .set_rate = xbus_clk_set_rate, - .parent = &ref_xtal_clk, -}; - -static struct clk rtc_clk = { - .get_rate = rtc_clk_get_rate, - .parent = &ref_xtal_clk, -}; - -/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */ -static struct clk usb_clk = { - .enable_reg = DIGCTRL_BASE_ADDR, - .enable_shift = 2, - .enable = _raw_clk_enable, - .disable = _raw_clk_disable, - .parent = &pll_clk, -}; - -#define _DEFINE_CLOCK(name, er, es, p) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_##es, \ - .get_rate = name##_get_rate, \ - .set_rate = name##_set_rate, \ - .set_parent = name##_set_parent, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = p, \ - } - -_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - /* for amba bus driver */ - _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) - /* for amba-pl011 driver */ - _REGISTER_CLOCK("duart", NULL, uart_clk) - _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) - _REGISTER_CLOCK("rtc", NULL, rtc_clk) - _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) - _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) - _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk) - _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk) - _REGISTER_CLOCK(NULL, "usb", usb_clk) - _REGISTER_CLOCK(NULL, "audio", audio_clk) - _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) - _REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk) - _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk) -}; - -static int clk_misc_init(void) -{ - u32 reg; - int ret; - - /* Fix up parent per register setting */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); - cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ? - &ref_xtal_clk : &ref_cpu_clk; - emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ? - &ref_xtal_clk : &ref_emi_clk; - ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ? - &ref_xtal_clk : &ref_io_clk; - gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ? - &ref_xtal_clk : &ref_io_clk; - lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ? - &ref_xtal_clk : &ref_pix_clk; - - /* Use int div over frac when both are available */ - __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); - __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); - __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); - reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP); - reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); - reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX); - reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX); - - /* - * Set safe hbus clock divider. A divider of 3 ensure that - * the Vddd voltage required for the cpu clock is sufficiently - * high for the hbus clock. - */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - reg &= BM_CLKCTRL_HBUS_DIV; - reg |= 3 << BP_CLKCTRL_HBUS_DIV; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - - ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY); - - /* Gate off cpu clock in WFI for power saving */ - __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); - - /* - * 480 MHz seems too high to be ssp clock source directly, - * so set frac to get a 288 MHz ref_io. - */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - reg &= ~BM_CLKCTRL_FRAC_IOFRAC; - reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC); - - return ret; -} - -int __init mx23_clocks_init(void) -{ - clk_misc_init(); - - /* - * source ssp clock from ref_io than ref_xtal, - * as ref_xtal only provides 24 MHz as maximum. - */ - clk_set_parent(&ssp_clk, &ref_io_clk); - - clk_prepare_enable(&cpu_clk); - clk_prepare_enable(&hbus_clk); - clk_prepare_enable(&xbus_clk); - clk_prepare_enable(&emi_clk); - clk_prepare_enable(&uart_clk); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0); - - return 0; -} diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c deleted file mode 100644 index cea29c99e21..00000000000 --- a/arch/arm/mach-mxs/clock-mx28.c +++ /dev/null @@ -1,803 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/clkdev.h> -#include <linux/spinlock.h> - -#include <asm/clkdev.h> -#include <asm/div64.h> - -#include <mach/mx28.h> -#include <mach/common.h> -#include <mach/clock.h> -#include <mach/digctl.h> - -#include "regs-clkctrl-mx28.h" - -#define CLKCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR) -#define DIGCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) - -#define PARENT_RATE_SHIFT 8 - -static struct clk pll2_clk; -static struct clk cpu_clk; -static struct clk emi_clk; -static struct clk saif0_clk; -static struct clk saif1_clk; -static struct clk clk32k_clk; -static DEFINE_SPINLOCK(clkmux_lock); - -/* - * HW_SAIF_CLKMUX_SEL: - * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1 - * clock pins selected for SAIF1 input clocks. - * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and - * SAIF0 clock inputs selected for SAIF1 input clocks. - * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input - * clocks. - * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input - * clocks. - */ -int mxs_saif_clkmux_select(unsigned int clkmux) -{ - if (clkmux > 0x3) - return -EINVAL; - - spin_lock(&clkmux_lock); - __raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX, - DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR); - __raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX, - DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR); - spin_unlock(&clkmux_lock); - - return 0; -} - -static int _raw_clk_enable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); - } - - return 0; -} - -static void _raw_clk_disable(struct clk *clk) -{ - u32 reg; - - if (clk->enable_reg) { - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - } -} - -/* - * ref_xtal_clk - */ -static unsigned long ref_xtal_clk_get_rate(struct clk *clk) -{ - return 24000000; -} - -static struct clk ref_xtal_clk = { - .get_rate = ref_xtal_clk_get_rate, -}; - -/* - * pll_clk - */ -static unsigned long pll0_clk_get_rate(struct clk *clk) -{ - return 480000000; -} - -static unsigned long pll1_clk_get_rate(struct clk *clk) -{ - return 480000000; -} - -static unsigned long pll2_clk_get_rate(struct clk *clk) -{ - return 50000000; -} - -#define _CLK_ENABLE_PLL(name, r, g) \ -static int name##_enable(struct clk *clk) \ -{ \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ - udelay(10); \ - \ - if (clk == &pll2_clk) \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ - else \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ - \ - return 0; \ -} - -_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS) -_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS) -_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE) - -#define _CLK_DISABLE_PLL(name, r, g) \ -static void name##_disable(struct clk *clk) \ -{ \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_POWER, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ - \ - if (clk == &pll2_clk) \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET); \ - else \ - __raw_writel(BM_CLKCTRL_##r##CTRL0_##g, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR); \ - \ -} - -_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS) -_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS) -_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE) - -#define _DEFINE_CLOCK_PLL(name) \ - static struct clk name = { \ - .get_rate = name##_get_rate, \ - .enable = name##_enable, \ - .disable = name##_disable, \ - .parent = &ref_xtal_clk, \ - } - -_DEFINE_CLOCK_PLL(pll0_clk); -_DEFINE_CLOCK_PLL(pll1_clk); -_DEFINE_CLOCK_PLL(pll2_clk); - -/* - * ref_clk - */ -#define _CLK_GET_RATE_REF(name, sr, ss) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - unsigned long parent_rate; \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr); \ - div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f; \ - parent_rate = clk_get_rate(clk->parent); \ - \ - return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18, \ - div, PARENT_RATE_SHIFT); \ -} - -_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU) -_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI) -_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0) -_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1) -_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX) -_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI) - -#define _DEFINE_CLOCK_REF(name, er, es) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_CLKGATE##es, \ - .get_rate = name##_get_rate, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = &pll0_clk, \ - } - -_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU); -_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI); -_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0); -_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1); -_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX); -_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI); - -/* - * General clocks - * - * clk_get_rate - */ -static unsigned long lradc_clk_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / 16; -} - -static unsigned long rtc_clk_get_rate(struct clk *clk) -{ - /* ref_xtal_clk is implemented as the only parent */ - return clk_get_rate(clk->parent) / 768; -} - -static unsigned long clk32k_clk_get_rate(struct clk *clk) -{ - return clk->parent->get_rate(clk->parent) / 750; -} - -static unsigned long spdif_clk_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / 4; -} - -#define _CLK_GET_RATE(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - if (clk->parent == &ref_xtal_clk) \ - div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >> \ - BP_CLKCTRL_##rs##_DIV_XTAL; \ - else \ - div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >> \ - BP_CLKCTRL_##rs##_DIV_##rs; \ - \ - if (!div) \ - return -EINVAL; \ - \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE(cpu_clk, CPU) -_CLK_GET_RATE(emi_clk, EMI) - -#define _CLK_GET_RATE1(name, rs) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - u32 reg, div; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV; \ - \ - if (!div) \ - return -EINVAL; \ - \ - if (clk == &saif0_clk || clk == &saif1_clk) \ - return clk_get_rate(clk->parent) >> 16 * div; \ - else \ - return clk_get_rate(clk->parent) / div; \ -} - -_CLK_GET_RATE1(hbus_clk, HBUS) -_CLK_GET_RATE1(xbus_clk, XBUS) -_CLK_GET_RATE1(ssp0_clk, SSP0) -_CLK_GET_RATE1(ssp1_clk, SSP1) -_CLK_GET_RATE1(ssp2_clk, SSP2) -_CLK_GET_RATE1(ssp3_clk, SSP3) -_CLK_GET_RATE1(gpmi_clk, GPMI) -_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF) -_CLK_GET_RATE1(saif0_clk, SAIF0) -_CLK_GET_RATE1(saif1_clk, SAIF1) - -#define _CLK_GET_RATE_STUB(name) \ -static unsigned long name##_get_rate(struct clk *clk) \ -{ \ - return clk_get_rate(clk->parent); \ -} - -_CLK_GET_RATE_STUB(uart_clk) -_CLK_GET_RATE_STUB(pwm_clk) -_CLK_GET_RATE_STUB(can0_clk) -_CLK_GET_RATE_STUB(can1_clk) -_CLK_GET_RATE_STUB(fec_clk) - -/* - * clk_set_rate - */ -/* fool compiler */ -#define BM_CLKCTRL_CPU_DIV 0 -#define BP_CLKCTRL_CPU_DIV 0 -#define BM_CLKCTRL_CPU_BUSY 0 - -#define _CLK_SET_RATE(name, dr, fr, fs) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u32 reg, bm_busy, div_max, d, f, div, frac; \ - unsigned long diff, parent_rate, calc_rate; \ - \ - div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ - bm_busy = BM_CLKCTRL_##dr##_BUSY; \ - \ - if (clk->parent == &ref_xtal_clk) { \ - parent_rate = clk_get_rate(clk->parent); \ - div = DIV_ROUND_UP(parent_rate, rate); \ - if (clk == &cpu_clk) { \ - div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \ - BP_CLKCTRL_CPU_DIV_XTAL; \ - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL; \ - } \ - if (div == 0 || div > div_max) \ - return -EINVAL; \ - } else { \ - /* \ - * hack alert: this block modifies clk->parent, too, \ - * so the base to use it the grand parent. \ - */ \ - parent_rate = clk_get_rate(clk->parent->parent); \ - rate >>= PARENT_RATE_SHIFT; \ - parent_rate >>= PARENT_RATE_SHIFT; \ - diff = parent_rate; \ - div = frac = 1; \ - if (clk == &cpu_clk) { \ - div_max = BM_CLKCTRL_CPU_DIV_CPU >> \ - BP_CLKCTRL_CPU_DIV_CPU; \ - bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU; \ - } \ - for (d = 1; d <= div_max; d++) { \ - f = parent_rate * 18 / d / rate; \ - if ((parent_rate * 18 / d) % rate) \ - f++; \ - if (f < 18 || f > 35) \ - continue; \ - \ - calc_rate = parent_rate * 18 / f / d; \ - if (calc_rate > rate) \ - continue; \ - \ - if (rate - calc_rate < diff) { \ - frac = f; \ - div = d; \ - diff = rate - calc_rate; \ - } \ - \ - if (diff == 0) \ - break; \ - } \ - \ - if (diff == parent_rate) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ - reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \ - reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \ - } \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - if (clk == &cpu_clk) { \ - reg &= ~BM_CLKCTRL_CPU_DIV_CPU; \ - reg |= div << BP_CLKCTRL_CPU_DIV_CPU; \ - } else { \ - reg &= ~BM_CLKCTRL_##dr##_DIV; \ - reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - \ - return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy); \ -} - -_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU) -_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0) -_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0) -_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1) -_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1) -_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX) -_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI) - -#define _CLK_SET_RATE1(name, dr) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u32 reg, div_max, div; \ - unsigned long parent_rate; \ - \ - parent_rate = clk_get_rate(clk->parent); \ - div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ - \ - div = DIV_ROUND_UP(parent_rate, rate); \ - if (div == 0 || div > div_max) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - reg &= ~BM_CLKCTRL_##dr##_DIV; \ - reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ - \ - return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\ -} - -_CLK_SET_RATE1(xbus_clk, XBUS) - -/* saif clock uses 16 bits frac div */ -#define _CLK_SET_RATE_SAIF(name, rs) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - u16 div; \ - u32 reg; \ - u64 lrate; \ - unsigned long parent_rate; \ - \ - parent_rate = clk_get_rate(clk->parent); \ - if (rate > parent_rate) \ - return -EINVAL; \ - \ - lrate = (u64)rate << 16; \ - do_div(lrate, parent_rate); \ - div = (u16)lrate; \ - \ - if (!div) \ - return -EINVAL; \ - \ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - reg &= ~BM_CLKCTRL_##rs##_DIV; \ - reg |= div << BP_CLKCTRL_##rs##_DIV; \ - if (reg & (1 << clk->enable_shift)) { \ - pr_err("%s: clock is gated\n", __func__); \ - return -EINVAL; \ - } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \ - \ - return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\ -} - -_CLK_SET_RATE_SAIF(saif0_clk, SAIF0) -_CLK_SET_RATE_SAIF(saif1_clk, SAIF1) - -#define _CLK_SET_RATE_STUB(name) \ -static int name##_set_rate(struct clk *clk, unsigned long rate) \ -{ \ - return -EINVAL; \ -} - -_CLK_SET_RATE_STUB(emi_clk) -_CLK_SET_RATE_STUB(uart_clk) -_CLK_SET_RATE_STUB(pwm_clk) -_CLK_SET_RATE_STUB(spdif_clk) -_CLK_SET_RATE_STUB(clk32k_clk) -_CLK_SET_RATE_STUB(can0_clk) -_CLK_SET_RATE_STUB(can1_clk) -_CLK_SET_RATE_STUB(fec_clk) - -/* - * clk_set_parent - */ -#define _CLK_SET_PARENT(name, bit) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) { \ - __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ - clk->parent = parent; \ - } \ - \ - return 0; \ -} - -_CLK_SET_PARENT(cpu_clk, CPU) -_CLK_SET_PARENT(emi_clk, EMI) -_CLK_SET_PARENT(ssp0_clk, SSP0) -_CLK_SET_PARENT(ssp1_clk, SSP1) -_CLK_SET_PARENT(ssp2_clk, SSP2) -_CLK_SET_PARENT(ssp3_clk, SSP3) -_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF) -_CLK_SET_PARENT(gpmi_clk, GPMI) -_CLK_SET_PARENT(saif0_clk, SAIF0) -_CLK_SET_PARENT(saif1_clk, SAIF1) - -#define _CLK_SET_PARENT_STUB(name) \ -static int name##_set_parent(struct clk *clk, struct clk *parent) \ -{ \ - if (parent != clk->parent) \ - return -EINVAL; \ - else \ - return 0; \ -} - -_CLK_SET_PARENT_STUB(pwm_clk) -_CLK_SET_PARENT_STUB(uart_clk) -_CLK_SET_PARENT_STUB(clk32k_clk) -_CLK_SET_PARENT_STUB(spdif_clk) -_CLK_SET_PARENT_STUB(fec_clk) -_CLK_SET_PARENT_STUB(can0_clk) -_CLK_SET_PARENT_STUB(can1_clk) - -/* - * clk definition - */ -static struct clk cpu_clk = { - .get_rate = cpu_clk_get_rate, - .set_rate = cpu_clk_set_rate, - .set_parent = cpu_clk_set_parent, - .parent = &ref_cpu_clk, -}; - -static struct clk hbus_clk = { - .get_rate = hbus_clk_get_rate, - .parent = &cpu_clk, -}; - -static struct clk xbus_clk = { - .get_rate = xbus_clk_get_rate, - .set_rate = xbus_clk_set_rate, - .parent = &ref_xtal_clk, -}; - -static struct clk lradc_clk = { - .get_rate = lradc_clk_get_rate, - .parent = &clk32k_clk, -}; - -static struct clk rtc_clk = { - .get_rate = rtc_clk_get_rate, - .parent = &ref_xtal_clk, -}; - -/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */ -static struct clk usb0_clk = { - .enable_reg = DIGCTRL_BASE_ADDR, - .enable_shift = 2, - .enable = _raw_clk_enable, - .disable = _raw_clk_disable, - .parent = &pll0_clk, -}; - -static struct clk usb1_clk = { - .enable_reg = DIGCTRL_BASE_ADDR, - .enable_shift = 16, - .enable = _raw_clk_enable, - .disable = _raw_clk_disable, - .parent = &pll1_clk, -}; - -#define _DEFINE_CLOCK(name, er, es, p) \ - static struct clk name = { \ - .enable_reg = CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er, \ - .enable_shift = BP_CLKCTRL_##er##_##es, \ - .get_rate = name##_get_rate, \ - .set_rate = name##_set_rate, \ - .set_parent = name##_set_parent, \ - .enable = _raw_clk_enable, \ - .disable = _raw_clk_disable, \ - .parent = p, \ - } - -_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk); -_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk); -_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk); -_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); -_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk); -_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - /* for amba bus driver */ - _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) - /* for amba-pl011 driver */ - _REGISTER_CLOCK("duart", NULL, uart_clk) - _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) - _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk) - _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) - _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk) - _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk) - _REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk) - _REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk) - _REGISTER_CLOCK("rtc", NULL, rtc_clk) - _REGISTER_CLOCK("pll2", NULL, pll2_clk) - _REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk) - _REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk) - _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk) - _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk) - _REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk) - _REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk) - _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) - _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) - _REGISTER_CLOCK(NULL, "usb0", usb0_clk) - _REGISTER_CLOCK(NULL, "usb1", usb1_clk) - _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk) - _REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk) - _REGISTER_CLOCK(NULL, "lradc", lradc_clk) - _REGISTER_CLOCK(NULL, "spdif", spdif_clk) - _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) - _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk) - _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk) -}; - -static int clk_misc_init(void) -{ - u32 reg; - int ret; - - /* Fix up parent per register setting */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ); - cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ? - &ref_xtal_clk : &ref_cpu_clk; - emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ? - &ref_xtal_clk : &ref_emi_clk; - ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ? - &ref_xtal_clk : &ref_io0_clk; - ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ? - &ref_xtal_clk : &ref_io0_clk; - ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ? - &ref_xtal_clk : &ref_io1_clk; - ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ? - &ref_xtal_clk : &ref_io1_clk; - lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ? - &ref_xtal_clk : &ref_pix_clk; - gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ? - &ref_xtal_clk : &ref_gpmi_clk; - saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ? - &ref_xtal_clk : &pll0_clk; - saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ? - &ref_xtal_clk : &pll0_clk; - - /* Use int div over frac when both are available */ - __raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); - __raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR); - __raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); - reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0); - reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1); - reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2); - reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3); - reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); - reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF); - reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF); - - /* SAIF has to use frac div for functional operation */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); - reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); - - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); - reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); - - /* - * Set safe hbus clock divider. A divider of 3 ensure that - * the Vddd voltage required for the cpu clock is sufficiently - * high for the hbus clock. - */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - reg &= BM_CLKCTRL_HBUS_DIV; - reg |= 3 << BP_CLKCTRL_HBUS_DIV; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS); - - ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY); - - /* Gate off cpu clock in WFI for power saving */ - __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, - CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); - - /* - * Extra fec clock setting - * The DENX M28 uses an external clock source - * and the clock output must not be enabled - */ - if (!machine_is_m28evk()) { - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); - reg &= ~BM_CLKCTRL_ENET_SLEEP; - reg |= BM_CLKCTRL_ENET_CLK_OUT_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); - } - - /* - * 480 MHz seems too high to be ssp clock source directly, - * so set frac0 to get a 288 MHz ref_io0. - */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); - reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC; - reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0); - - return ret; -} - -int __init mx28_clocks_init(void) -{ - clk_misc_init(); - - /* - * source ssp clock from ref_io0 than ref_xtal, - * as ref_xtal only provides 24 MHz as maximum. - */ - clk_set_parent(&ssp0_clk, &ref_io0_clk); - clk_set_parent(&ssp1_clk, &ref_io0_clk); - clk_set_parent(&ssp2_clk, &ref_io1_clk); - clk_set_parent(&ssp3_clk, &ref_io1_clk); - - clk_prepare_enable(&cpu_clk); - clk_prepare_enable(&hbus_clk); - clk_prepare_enable(&xbus_clk); - clk_prepare_enable(&emi_clk); - clk_prepare_enable(&uart_clk); - - clk_set_parent(&lcdif_clk, &ref_pix_clk); - clk_set_parent(&saif0_clk, &pll0_clk); - clk_set_parent(&saif1_clk, &pll0_clk); - - /* - * Set an initial clock rate for the saif internal logic to work - * properly. This is important when working in EXTMASTER mode that - * uses the other saif's BITCLK&LRCLK but it still needs a basic - * clock which should be fast enough for the internal logic. - */ - clk_set_rate(&saif0_clk, 24000000); - clk_set_rate(&saif1_clk, 24000000); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); - - return 0; -} diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c deleted file mode 100644 index 97a6f4acc6c..00000000000 --- a/arch/arm/mach-mxs/clock.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Based on arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -/* #define DEBUG */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <linux/proc_fs.h> -#include <linux/semaphore.h> -#include <linux/string.h> - -#include <mach/clock.h> - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -/*------------------------------------------------------------------------- - * Standard clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ - -static void __clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - WARN_ON(!clk->usecount); - - if (!(--clk->usecount)) { - if (clk->disable) - clk->disable(clk); - __clk_disable(clk->parent); - } -} - -static int __clk_enable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (clk->usecount++ == 0) { - __clk_enable(clk->parent); - - if (clk->enable) - clk->enable(clk); - } - return 0; -} - -/* - * The clk_enable/clk_disable could be called by drivers in atomic context, - * so they should not really hold mutex. Instead, clk_prepare/clk_unprepare - * can hold a mutex, as the pair will only be called in non-atomic context. - * Before migrating to common clk framework, we can have __clk_enable and - * __clk_disable called in clk_prepare/clk_unprepare with mutex held and - * leave clk_enable/clk_disable as the dummy functions. - */ -int clk_prepare(struct clk *clk) -{ - int ret = 0; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = __clk_enable(clk); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_prepare); - -void clk_unprepare(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - __clk_disable(clk); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unprepare); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - /* nothing to do */ -} -EXPORT_SYMBOL(clk_disable); - -/* Retrieve the *current* clock rate. If the clock itself - * does not provide a special calculation routine, ask - * its parent and so on, until one is able to return - * a valid clock rate - */ -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return 0UL; - - if (clk->get_rate) - return clk->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -/* Round the requested clock rate to the nearest supported - * rate that is less than or equal to the requested rate. - * This is dependent on the clock's current parent. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk == NULL || IS_ERR(clk) || !clk->round_rate) - return 0; - - return clk->round_rate(clk, rate); -} -EXPORT_SYMBOL(clk_round_rate); - -/* Set the clock to the requested clock rate. The rate must - * match a supported rate exactly based on what clk_round_rate returns - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) - return ret; - - mutex_lock(&clocks_mutex); - ret = clk->set_rate(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* Set the clock's parent to another clock source */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - struct clk *old; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || - IS_ERR(parent) || clk->set_parent == NULL) - return ret; - - if (clk->usecount) - clk_prepare_enable(parent); - - mutex_lock(&clocks_mutex); - ret = clk->set_parent(clk, parent); - if (ret == 0) { - old = clk->parent; - clk->parent = parent; - } else { - old = parent; - } - mutex_unlock(&clocks_mutex); - - if (clk->usecount) - clk_disable(old); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -/* Retrieve the clock's parent clock source */ -struct clk *clk_get_parent(struct clk *clk) -{ - struct clk *ret = NULL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h deleted file mode 100644 index 592c9ab5d76..00000000000 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_CLOCK_H__ -#define __MACH_MXS_CLOCK_H__ - -#ifndef __ASSEMBLY__ -#include <linux/list.h> - -struct module; - -struct clk { - int id; - /* Source clock this clk depends on */ - struct clk *parent; - /* Reference count of clock enable/disable */ - __s8 usecount; - /* Register bit position for clock's enable/disable control. */ - u8 enable_shift; - /* Register address for clock's enable/disable control. */ - void __iomem *enable_reg; - u32 flags; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); - -#endif /* __ASSEMBLY__ */ -#endif /* __MACH_MXS_CLOCK_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 8d88399b73e..84af61cf6a6 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -11,11 +11,9 @@ #ifndef __MACH_MXS_COMMON_H__ #define __MACH_MXS_COMMON_H__ -struct clk; - extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); -extern void mxs_timer_init(struct clk *, int); +extern void mxs_timer_init(int); extern void mxs_restart(char, const char *); extern int mxs_saif_clkmux_select(unsigned int clkmux); @@ -33,6 +31,4 @@ extern void mx28_init_irq(void); extern void icoll_init_irq(void); -extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask); - #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index da4610ebe9e..dafd48e86c8 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -226,7 +226,7 @@ static void __init mx28evk_fec_reset(void) struct clk *clk; /* Enable fec phy clock */ - clk = clk_get_sys("pll2", NULL); + clk = clk_get_sys("enet_out", NULL); if (!IS_ERR(clk)) clk_prepare_enable(clk); diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h deleted file mode 100644 index 0ea5c9d0e2b..00000000000 --- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Freescale CLKCTRL Register Definitions - * - * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. - * Copyright 2008-2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file is created by xml file. Don't Edit it. - * - * Xml Revision: 1.48 - * Template revision: 26195 - */ - -#ifndef __REGS_CLKCTRL_MX23_H__ -#define __REGS_CLKCTRL_MX23_H__ - - -#define HW_CLKCTRL_PLLCTRL0 (0x00000000) -#define HW_CLKCTRL_PLLCTRL0_SET (0x00000004) -#define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008) -#define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c) - -#define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28 -#define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000 -#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \ - (((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL) -#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1 -#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2 -#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_CP_SEL 24 -#define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000 -#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \ - (((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL) -#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1 -#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2 -#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20 -#define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000 -#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \ - (((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL) -#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1 -#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2 -#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 -#define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000 - -#define HW_CLKCTRL_PLLCTRL1 (0x00000010) - -#define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000 -#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0 -#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF -#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \ - (((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT) - -#define HW_CLKCTRL_CPU (0x00000020) -#define HW_CLKCTRL_CPU_SET (0x00000024) -#define HW_CLKCTRL_CPU_CLR (0x00000028) -#define HW_CLKCTRL_CPU_TOG (0x0000002c) - -#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 -#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 -#define BP_CLKCTRL_CPU_DIV_XTAL 16 -#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 -#define BF_CLKCTRL_CPU_DIV_XTAL(v) \ - (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_DIV_CPU 0 -#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F -#define BF_CLKCTRL_CPU_DIV_CPU(v) \ - (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU) - -#define HW_CLKCTRL_HBUS (0x00000030) -#define HW_CLKCTRL_HBUS_SET (0x00000034) -#define HW_CLKCTRL_HBUS_CLR (0x00000038) -#define HW_CLKCTRL_HBUS_TOG (0x0000003c) - -#define BM_CLKCTRL_HBUS_BUSY 0x20000000 -#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000 -#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000 -#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 -#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 -#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000 -#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000 -#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 -#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 -#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000 -#define BP_CLKCTRL_HBUS_SLOW_DIV 16 -#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 -#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ - (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV) -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 -#define BP_CLKCTRL_HBUS_DIV 0 -#define BM_CLKCTRL_HBUS_DIV 0x0000001F -#define BF_CLKCTRL_HBUS_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_HBUS_DIV) - -#define HW_CLKCTRL_XBUS (0x00000040) - -#define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 -#define BP_CLKCTRL_XBUS_DIV 0 -#define BM_CLKCTRL_XBUS_DIV 0x000003FF -#define BF_CLKCTRL_XBUS_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_XBUS_DIV) - -#define HW_CLKCTRL_XTAL (0x00000050) -#define HW_CLKCTRL_XTAL_SET (0x00000054) -#define HW_CLKCTRL_XTAL_CLR (0x00000058) -#define HW_CLKCTRL_XTAL_TOG (0x0000005c) - -#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 -#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 -#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE 30 -#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE 0x40000000 -#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 -#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 -#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000 -#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000 -#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 -#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_DIV_UART 0 -#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 -#define BF_CLKCTRL_XTAL_DIV_UART(v) \ - (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART) - -#define HW_CLKCTRL_PIX (0x00000060) - -#define BP_CLKCTRL_PIX_CLKGATE 31 -#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 -#define BM_CLKCTRL_PIX_BUSY 0x20000000 -#define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000 -#define BP_CLKCTRL_PIX_DIV 0 -#define BM_CLKCTRL_PIX_DIV 0x00000FFF -#define BF_CLKCTRL_PIX_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_PIX_DIV) - -#define HW_CLKCTRL_SSP (0x00000070) - -#define BP_CLKCTRL_SSP_CLKGATE 31 -#define BM_CLKCTRL_SSP_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP_BUSY 0x20000000 -#define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200 -#define BP_CLKCTRL_SSP_DIV 0 -#define BM_CLKCTRL_SSP_DIV 0x000001FF -#define BF_CLKCTRL_SSP_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SSP_DIV) - -#define HW_CLKCTRL_GPMI (0x00000080) - -#define BP_CLKCTRL_GPMI_CLKGATE 31 -#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 -#define BP_CLKCTRL_GPMI_DIV 0 -#define BM_CLKCTRL_GPMI_DIV 0x000003FF -#define BF_CLKCTRL_GPMI_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_GPMI_DIV) - -#define HW_CLKCTRL_SPDIF (0x00000090) - -#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 - -#define HW_CLKCTRL_EMI (0x000000a0) - -#define BP_CLKCTRL_EMI_CLKGATE 31 -#define BM_CLKCTRL_EMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000 -#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 -#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 -#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 -#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 -#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_DIV_XTAL 8 -#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 -#define BF_CLKCTRL_EMI_DIV_XTAL(v) \ - (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_DIV_EMI 0 -#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F -#define BF_CLKCTRL_EMI_DIV_EMI(v) \ - (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI) - -#define HW_CLKCTRL_IR (0x000000b0) - -#define BM_CLKCTRL_IR_CLKGATE 0x80000000 -#define BM_CLKCTRL_IR_AUTO_DIV 0x20000000 -#define BM_CLKCTRL_IR_IR_BUSY 0x10000000 -#define BM_CLKCTRL_IR_IROV_BUSY 0x08000000 -#define BP_CLKCTRL_IR_IROV_DIV 16 -#define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000 -#define BF_CLKCTRL_IR_IROV_DIV(v) \ - (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV) -#define BP_CLKCTRL_IR_IR_DIV 0 -#define BM_CLKCTRL_IR_IR_DIV 0x000003FF -#define BF_CLKCTRL_IR_IR_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_IR_IR_DIV) - -#define HW_CLKCTRL_SAIF (0x000000c0) - -#define BM_CLKCTRL_SAIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF_BUSY 0x20000000 -#define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000 -#define BP_CLKCTRL_SAIF_DIV 0 -#define BM_CLKCTRL_SAIF_DIV 0x0000FFFF -#define BF_CLKCTRL_SAIF_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SAIF_DIV) - -#define HW_CLKCTRL_TV (0x000000d0) - -#define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000 -#define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000 - -#define HW_CLKCTRL_ETM (0x000000e0) - -#define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040 -#define BP_CLKCTRL_ETM_DIV 0 -#define BM_CLKCTRL_ETM_DIV 0x0000003F -#define BF_CLKCTRL_ETM_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_ETM_DIV) - -#define HW_CLKCTRL_FRAC (0x000000f0) -#define HW_CLKCTRL_FRAC_SET (0x000000f4) -#define HW_CLKCTRL_FRAC_CLR (0x000000f8) -#define HW_CLKCTRL_FRAC_TOG (0x000000fc) - -#define BP_CLKCTRL_FRAC_CLKGATEIO 31 -#define BM_CLKCTRL_FRAC_CLKGATEIO 0x80000000 -#define BM_CLKCTRL_FRAC_IO_STABLE 0x40000000 -#define BP_CLKCTRL_FRAC_IOFRAC 24 -#define BM_CLKCTRL_FRAC_IOFRAC 0x3F000000 -#define BF_CLKCTRL_FRAC_IOFRAC(v) \ - (((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC) -#define BP_CLKCTRL_FRAC_CLKGATEPIX 23 -#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 -#define BM_CLKCTRL_FRAC_PIX_STABLE 0x00400000 -#define BP_CLKCTRL_FRAC_PIXFRAC 16 -#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 -#define BF_CLKCTRL_FRAC_PIXFRAC(v) \ - (((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC) -#define BP_CLKCTRL_FRAC_CLKGATEEMI 15 -#define BM_CLKCTRL_FRAC_CLKGATEEMI 0x00008000 -#define BM_CLKCTRL_FRAC_EMI_STABLE 0x00004000 -#define BP_CLKCTRL_FRAC_EMIFRAC 8 -#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 -#define BF_CLKCTRL_FRAC_EMIFRAC(v) \ - (((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC) -#define BP_CLKCTRL_FRAC_CLKGATECPU 7 -#define BM_CLKCTRL_FRAC_CLKGATECPU 0x00000080 -#define BM_CLKCTRL_FRAC_CPU_STABLE 0x00000040 -#define BP_CLKCTRL_FRAC_CPUFRAC 0 -#define BM_CLKCTRL_FRAC_CPUFRAC 0x0000003F -#define BF_CLKCTRL_FRAC_CPUFRAC(v) \ - (((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC) - -#define HW_CLKCTRL_FRAC1 (0x00000100) -#define HW_CLKCTRL_FRAC1_SET (0x00000104) -#define HW_CLKCTRL_FRAC1_CLR (0x00000108) -#define HW_CLKCTRL_FRAC1_TOG (0x0000010c) - -#define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000 -#define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000 - -#define HW_CLKCTRL_CLKSEQ (0x00000110) -#define HW_CLKCTRL_CLKSEQ_SET (0x00000114) -#define HW_CLKCTRL_CLKSEQ_CLR (0x00000118) -#define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c) - -#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 -#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 -#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 -#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 -#define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 -#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 - -#define HW_CLKCTRL_RESET (0x00000120) - -#define BM_CLKCTRL_RESET_CHIP 0x00000002 -#define BM_CLKCTRL_RESET_DIG 0x00000001 - -#define HW_CLKCTRL_STATUS (0x00000130) - -#define BP_CLKCTRL_STATUS_CPU_LIMIT 30 -#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 -#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ - (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) - -#define HW_CLKCTRL_VERSION (0x00000140) - -#define BP_CLKCTRL_VERSION_MAJOR 24 -#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000 -#define BF_CLKCTRL_VERSION_MAJOR(v) \ - (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR) -#define BP_CLKCTRL_VERSION_MINOR 16 -#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000 -#define BF_CLKCTRL_VERSION_MINOR(v) \ - (((v) << 16) & BM_CLKCTRL_VERSION_MINOR) -#define BP_CLKCTRL_VERSION_STEP 0 -#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF -#define BF_CLKCTRL_VERSION_STEP(v) \ - (((v) << 0) & BM_CLKCTRL_VERSION_STEP) - -#endif /* __REGS_CLKCTRL_MX23_H__ */ diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h deleted file mode 100644 index 7d1b061d794..00000000000 --- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h +++ /dev/null @@ -1,486 +0,0 @@ -/* - * Freescale CLKCTRL Register Definitions - * - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file is created by xml file. Don't Edit it. - * - * Xml Revision: 1.48 - * Template revision: 26195 - */ - -#ifndef __REGS_CLKCTRL_MX28_H__ -#define __REGS_CLKCTRL_MX28_H__ - -#define HW_CLKCTRL_PLL0CTRL0 (0x00000000) -#define HW_CLKCTRL_PLL0CTRL0_SET (0x00000004) -#define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008) -#define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c) - -#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28 -#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000 -#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \ - (((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL) -#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1 -#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2 -#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24 -#define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000 -#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \ - (((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL) -#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1 -#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2 -#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20 -#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000 -#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \ - (((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL) -#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1 -#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2 -#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000 -#define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000 - -#define HW_CLKCTRL_PLL0CTRL1 (0x00000010) - -#define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000 -#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0 -#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF -#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \ - (((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT) - -#define HW_CLKCTRL_PLL1CTRL0 (0x00000020) -#define HW_CLKCTRL_PLL1CTRL0_SET (0x00000024) -#define HW_CLKCTRL_PLL1CTRL0_CLR (0x00000028) -#define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c) - -#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000 -#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28 -#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000 -#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \ - (((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL) -#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1 -#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2 -#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24 -#define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000 -#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \ - (((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL) -#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1 -#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2 -#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20 -#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000 -#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \ - (((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL) -#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT 0x0 -#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1 -#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2 -#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000 -#define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000 - -#define HW_CLKCTRL_PLL1CTRL1 (0x00000030) - -#define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000 -#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0 -#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF -#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \ - (((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT) - -#define HW_CLKCTRL_PLL2CTRL0 (0x00000040) -#define HW_CLKCTRL_PLL2CTRL0_SET (0x00000044) -#define HW_CLKCTRL_PLL2CTRL0_CLR (0x00000048) -#define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c) - -#define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000 -#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28 -#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000 -#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \ - (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL) -#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000 -#define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24 -#define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000 -#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \ - (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL) -#define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000 - -#define HW_CLKCTRL_CPU (0x00000050) -#define HW_CLKCTRL_CPU_SET (0x00000054) -#define HW_CLKCTRL_CPU_CLR (0x00000058) -#define HW_CLKCTRL_CPU_TOG (0x0000005c) - -#define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 -#define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 -#define BP_CLKCTRL_CPU_DIV_XTAL 16 -#define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 -#define BF_CLKCTRL_CPU_DIV_XTAL(v) \ - (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_DIV_CPU 0 -#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F -#define BF_CLKCTRL_CPU_DIV_CPU(v) \ - (((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU) - -#define HW_CLKCTRL_HBUS (0x00000060) -#define HW_CLKCTRL_HBUS_SET (0x00000064) -#define HW_CLKCTRL_HBUS_CLR (0x00000068) -#define HW_CLKCTRL_HBUS_TOG (0x0000006c) - -#define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000 -#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000 -#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000 -#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000 -#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 -#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 -#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE 0x01000000 -#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE 0x00800000 -#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 -#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 -#define BM_CLKCTRL_HBUS_ASM_ENABLE 0x00100000 -#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE 0x00080000 -#define BP_CLKCTRL_HBUS_SLOW_DIV 16 -#define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 -#define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ - (((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV) -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1 0x0 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2 0x1 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4 0x2 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 -#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 -#define BP_CLKCTRL_HBUS_DIV 0 -#define BM_CLKCTRL_HBUS_DIV 0x0000001F -#define BF_CLKCTRL_HBUS_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_HBUS_DIV) - -#define HW_CLKCTRL_XBUS (0x00000070) - -#define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800 -#define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 -#define BP_CLKCTRL_XBUS_DIV 0 -#define BM_CLKCTRL_XBUS_DIV 0x000003FF -#define BF_CLKCTRL_XBUS_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_XBUS_DIV) - -#define HW_CLKCTRL_XTAL (0x00000080) -#define HW_CLKCTRL_XTAL_SET (0x00000084) -#define HW_CLKCTRL_XTAL_CLR (0x00000088) -#define HW_CLKCTRL_XTAL_TOG (0x0000008c) - -#define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 -#define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 -#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 -#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 -#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 -#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_DIV_UART 0 -#define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 -#define BF_CLKCTRL_XTAL_DIV_UART(v) \ - (((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART) - -#define HW_CLKCTRL_SSP0 (0x00000090) - -#define BP_CLKCTRL_SSP0_CLKGATE 31 -#define BM_CLKCTRL_SSP0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP0_BUSY 0x20000000 -#define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200 -#define BP_CLKCTRL_SSP0_DIV 0 -#define BM_CLKCTRL_SSP0_DIV 0x000001FF -#define BF_CLKCTRL_SSP0_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SSP0_DIV) - -#define HW_CLKCTRL_SSP1 (0x000000a0) - -#define BP_CLKCTRL_SSP1_CLKGATE 31 -#define BM_CLKCTRL_SSP1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP1_BUSY 0x20000000 -#define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200 -#define BP_CLKCTRL_SSP1_DIV 0 -#define BM_CLKCTRL_SSP1_DIV 0x000001FF -#define BF_CLKCTRL_SSP1_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SSP1_DIV) - -#define HW_CLKCTRL_SSP2 (0x000000b0) - -#define BP_CLKCTRL_SSP2_CLKGATE 31 -#define BM_CLKCTRL_SSP2_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP2_BUSY 0x20000000 -#define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200 -#define BP_CLKCTRL_SSP2_DIV 0 -#define BM_CLKCTRL_SSP2_DIV 0x000001FF -#define BF_CLKCTRL_SSP2_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SSP2_DIV) - -#define HW_CLKCTRL_SSP3 (0x000000c0) - -#define BP_CLKCTRL_SSP3_CLKGATE 31 -#define BM_CLKCTRL_SSP3_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP3_BUSY 0x20000000 -#define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200 -#define BP_CLKCTRL_SSP3_DIV 0 -#define BM_CLKCTRL_SSP3_DIV 0x000001FF -#define BF_CLKCTRL_SSP3_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SSP3_DIV) - -#define HW_CLKCTRL_GPMI (0x000000d0) - -#define BP_CLKCTRL_GPMI_CLKGATE 31 -#define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 -#define BP_CLKCTRL_GPMI_DIV 0 -#define BM_CLKCTRL_GPMI_DIV 0x000003FF -#define BF_CLKCTRL_GPMI_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_GPMI_DIV) - -#define HW_CLKCTRL_SPDIF (0x000000e0) - -#define BP_CLKCTRL_SPDIF_CLKGATE 31 -#define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 - -#define HW_CLKCTRL_EMI (0x000000f0) - -#define BP_CLKCTRL_EMI_CLKGATE 31 -#define BM_CLKCTRL_EMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_EMI_SYNC_MODE_EN 0x40000000 -#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 -#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 -#define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 -#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 -#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_DIV_XTAL 8 -#define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 -#define BF_CLKCTRL_EMI_DIV_XTAL(v) \ - (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_DIV_EMI 0 -#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F -#define BF_CLKCTRL_EMI_DIV_EMI(v) \ - (((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI) - -#define HW_CLKCTRL_SAIF0 (0x00000100) - -#define BP_CLKCTRL_SAIF0_CLKGATE 31 -#define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF0_BUSY 0x20000000 -#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000 -#define BP_CLKCTRL_SAIF0_DIV 0 -#define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF -#define BF_CLKCTRL_SAIF0_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SAIF0_DIV) - -#define HW_CLKCTRL_SAIF1 (0x00000110) - -#define BP_CLKCTRL_SAIF1_CLKGATE 31 -#define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF1_BUSY 0x20000000 -#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000 -#define BP_CLKCTRL_SAIF1_DIV 0 -#define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF -#define BF_CLKCTRL_SAIF1_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_SAIF1_DIV) - -#define HW_CLKCTRL_DIS_LCDIF (0x00000120) - -#define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31 -#define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000 -#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000 -#define BP_CLKCTRL_DIS_LCDIF_DIV 0 -#define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF -#define BF_CLKCTRL_DIS_LCDIF_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV) - -#define HW_CLKCTRL_ETM (0x00000130) - -#define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080 -#define BP_CLKCTRL_ETM_DIV 0 -#define BM_CLKCTRL_ETM_DIV 0x0000007F -#define BF_CLKCTRL_ETM_DIV(v) \ - (((v) << 0) & BM_CLKCTRL_ETM_DIV) - -#define HW_CLKCTRL_ENET (0x00000140) - -#define BM_CLKCTRL_ENET_SLEEP 0x80000000 -#define BP_CLKCTRL_ENET_DISABLE 30 -#define BM_CLKCTRL_ENET_DISABLE 0x40000000 -#define BM_CLKCTRL_ENET_STATUS 0x20000000 -#define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000 -#define BP_CLKCTRL_ENET_DIV_TIME 21 -#define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000 -#define BF_CLKCTRL_ENET_DIV_TIME(v) \ - (((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME) -#define BM_CLKCTRL_ENET_BUSY 0x08000000 -#define BP_CLKCTRL_ENET_DIV 21 -#define BM_CLKCTRL_ENET_DIV 0x07E00000 -#define BF_CLKCTRL_ENET_DIV(v) \ - (((v) << 21) & BM_CLKCTRL_ENET_DIV) -#define BP_CLKCTRL_ENET_TIME_SEL 19 -#define BM_CLKCTRL_ENET_TIME_SEL 0x00180000 -#define BF_CLKCTRL_ENET_TIME_SEL(v) \ - (((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL) -#define BV_CLKCTRL_ENET_TIME_SEL__XTAL 0x0 -#define BV_CLKCTRL_ENET_TIME_SEL__PLL 0x1 -#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK 0x2 -#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000 -#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000 -#define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000 - -#define HW_CLKCTRL_HSADC (0x00000150) - -#define BM_CLKCTRL_HSADC_RESETB 0x40000000 -#define BP_CLKCTRL_HSADC_FREQDIV 28 -#define BM_CLKCTRL_HSADC_FREQDIV 0x30000000 -#define BF_CLKCTRL_HSADC_FREQDIV(v) \ - (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV) - -#define HW_CLKCTRL_FLEXCAN (0x00000160) - -#define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30 -#define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000 -#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000 -#define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28 -#define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000 -#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000 - -#define HW_CLKCTRL_FRAC0 (0x000001b0) -#define HW_CLKCTRL_FRAC0_SET (0x000001b4) -#define HW_CLKCTRL_FRAC0_CLR (0x000001b8) -#define HW_CLKCTRL_FRAC0_TOG (0x000001bc) - -#define BP_CLKCTRL_FRAC0_CLKGATEIO0 31 -#define BM_CLKCTRL_FRAC0_CLKGATEIO0 0x80000000 -#define BM_CLKCTRL_FRAC0_IO0_STABLE 0x40000000 -#define BP_CLKCTRL_FRAC0_IO0FRAC 24 -#define BM_CLKCTRL_FRAC0_IO0FRAC 0x3F000000 -#define BF_CLKCTRL_FRAC0_IO0FRAC(v) \ - (((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC) -#define BP_CLKCTRL_FRAC0_CLKGATEIO1 23 -#define BM_CLKCTRL_FRAC0_CLKGATEIO1 0x00800000 -#define BM_CLKCTRL_FRAC0_IO1_STABLE 0x00400000 -#define BP_CLKCTRL_FRAC0_IO1FRAC 16 -#define BM_CLKCTRL_FRAC0_IO1FRAC 0x003F0000 -#define BF_CLKCTRL_FRAC0_IO1FRAC(v) \ - (((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC) -#define BP_CLKCTRL_FRAC0_CLKGATEEMI 15 -#define BM_CLKCTRL_FRAC0_CLKGATEEMI 0x00008000 -#define BM_CLKCTRL_FRAC0_EMI_STABLE 0x00004000 -#define BP_CLKCTRL_FRAC0_EMIFRAC 8 -#define BM_CLKCTRL_FRAC0_EMIFRAC 0x00003F00 -#define BF_CLKCTRL_FRAC0_EMIFRAC(v) \ - (((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC) -#define BP_CLKCTRL_FRAC0_CLKGATECPU 7 -#define BM_CLKCTRL_FRAC0_CLKGATECPU 0x00000080 -#define BM_CLKCTRL_FRAC0_CPU_STABLE 0x00000040 -#define BP_CLKCTRL_FRAC0_CPUFRAC 0 -#define BM_CLKCTRL_FRAC0_CPUFRAC 0x0000003F -#define BF_CLKCTRL_FRAC0_CPUFRAC(v) \ - (((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC) - -#define HW_CLKCTRL_FRAC1 (0x000001c0) -#define HW_CLKCTRL_FRAC1_SET (0x000001c4) -#define HW_CLKCTRL_FRAC1_CLR (0x000001c8) -#define HW_CLKCTRL_FRAC1_TOG (0x000001cc) - -#define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23 -#define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000 -#define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000 -#define BP_CLKCTRL_FRAC1_GPMIFRAC 16 -#define BM_CLKCTRL_FRAC1_GPMIFRAC 0x003F0000 -#define BF_CLKCTRL_FRAC1_GPMIFRAC(v) \ - (((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC) -#define BP_CLKCTRL_FRAC1_CLKGATEHSADC 15 -#define BM_CLKCTRL_FRAC1_CLKGATEHSADC 0x00008000 -#define BM_CLKCTRL_FRAC1_HSADC_STABLE 0x00004000 -#define BP_CLKCTRL_FRAC1_HSADCFRAC 8 -#define BM_CLKCTRL_FRAC1_HSADCFRAC 0x00003F00 -#define BF_CLKCTRL_FRAC1_HSADCFRAC(v) \ - (((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC) -#define BP_CLKCTRL_FRAC1_CLKGATEPIX 7 -#define BM_CLKCTRL_FRAC1_CLKGATEPIX 0x00000080 -#define BM_CLKCTRL_FRAC1_PIX_STABLE 0x00000040 -#define BP_CLKCTRL_FRAC1_PIXFRAC 0 -#define BM_CLKCTRL_FRAC1_PIXFRAC 0x0000003F -#define BF_CLKCTRL_FRAC1_PIXFRAC(v) \ - (((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC) - -#define HW_CLKCTRL_CLKSEQ (0x000001d0) -#define HW_CLKCTRL_CLKSEQ_SET (0x000001d4) -#define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8) -#define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc) - -#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000 -#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000 -#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1 -#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0 -#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 -#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2 0x00000020 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1 0x00000010 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0 0x00000008 -#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000004 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1 0x00000002 -#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0 0x00000001 - -#define HW_CLKCTRL_RESET (0x000001e0) - -#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020 -#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010 -#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008 -#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT 0x00000004 -#define BM_CLKCTRL_RESET_CHIP 0x00000002 -#define BM_CLKCTRL_RESET_DIG 0x00000001 - -#define HW_CLKCTRL_STATUS (0x000001f0) - -#define BP_CLKCTRL_STATUS_CPU_LIMIT 30 -#define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 -#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ - (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) - -#define HW_CLKCTRL_VERSION (0x00000200) - -#define BP_CLKCTRL_VERSION_MAJOR 24 -#define BM_CLKCTRL_VERSION_MAJOR 0xFF000000 -#define BF_CLKCTRL_VERSION_MAJOR(v) \ - (((v) << 24) & BM_CLKCTRL_VERSION_MAJOR) -#define BP_CLKCTRL_VERSION_MINOR 16 -#define BM_CLKCTRL_VERSION_MINOR 0x00FF0000 -#define BF_CLKCTRL_VERSION_MINOR(v) \ - (((v) << 16) & BM_CLKCTRL_VERSION_MINOR) -#define BP_CLKCTRL_VERSION_STEP 0 -#define BM_CLKCTRL_VERSION_STEP 0x0000FFFF -#define BF_CLKCTRL_VERSION_STEP(v) \ - (((v) << 0) & BM_CLKCTRL_VERSION_STEP) - -#endif /* __REGS_CLKCTRL_MX28_H__ */ diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c index 80ac1fca8a0..30042e23bfa 100644 --- a/arch/arm/mach-mxs/system.c +++ b/arch/arm/mach-mxs/system.c @@ -37,8 +37,6 @@ #define MXS_MODULE_CLKGATE (1 << 30) #define MXS_MODULE_SFTRST (1 << 31) -#define CLKCTRL_TIMEOUT 10 /* 10 ms */ - static void __iomem *mxs_clkctrl_reset_addr; /* @@ -139,17 +137,3 @@ error: return -ETIMEDOUT; } EXPORT_SYMBOL(mxs_reset_block); - -int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT); - while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) - + reg_offset) & mask) { - if (time_after(jiffies, timeout)) { - pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset); - return -ETIMEDOUT; - } - } - - return 0; -} diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c index 564a63279f1..02d36de9c4e 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/arch/arm/mach-mxs/timer.c @@ -20,6 +20,7 @@ * MA 02110-1301, USA. */ +#include <linux/err.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clockchips.h> @@ -243,8 +244,16 @@ static int __init mxs_clocksource_init(struct clk *timer_clk) return 0; } -void __init mxs_timer_init(struct clk *timer_clk, int irq) +void __init mxs_timer_init(int irq) { + struct clk *timer_clk; + + timer_clk = clk_get_sys("timrot", NULL); + if (IS_ERR(timer_clk)) { + pr_err("%s: failed to get clk\n", __func__); + return; + } + clk_prepare_enable(timer_clk); /* |