Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

1 files changed, 0 insertions, 32 deletions

diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index cce2c9dfb5d..4a1065e41e9 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -110,38 +110,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd)
 }
 
 /*
- * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
- * to simply request an IRQ passed as a resource. So the GPIO pin needs
- * to be requested by this hog and set as input.
- */
-static int __init cpu8815_eth_init(void)
-{
-	struct device_node *eth;
-	int gpio, irq, err;
-
-	eth = of_find_node_by_path("/usb-s8815/ethernet-gpio");
-	if (!eth) {
-		pr_info("could not find any ethernet GPIO\n");
-		return 0;
-	}
-	gpio = of_get_gpio(eth, 0);
-	err = gpio_request(gpio, "eth_irq");
-	if (err) {
-		pr_info("failed to request ethernet GPIO\n");
-		return -ENODEV;
-	}
-	err = gpio_direction_input(gpio);
-	if (err) {
-		pr_info("failed to set ethernet GPIO as input\n");
-		return -ENODEV;
-	}
-	irq = gpio_to_irq(gpio);
-	pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq);
-	return 0;
-}
-device_initcall(cpu8815_eth_init);
-
-/*
  * This GPIO pin turns on a line that is used to detect card insertion
  * on this board.
  */