Merge ../linus

1 files changed, 186 insertions, 14 deletions

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 89f0cc74a51..cd3a06dfc0a 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -24,7 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -35,12 +37,55 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/keypad.h>
 #include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
 
 extern int omap_gpio_init(void);
 
-static struct mtd_partition h2_partitions[] = {
+static int h2_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_F10),
+	KEY(0, 4, KEY_F5),
+	KEY(0, 5, KEY_9),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_2),
+	KEY(1, 3, KEY_F9),
+	KEY(1, 4, KEY_F7),
+	KEY(1, 5, KEY_0),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_6),
+	KEY(2, 2, KEY_1),
+	KEY(2, 3, KEY_F2),
+	KEY(2, 4, KEY_F6),
+	KEY(2, 5, KEY_HOME),
+	KEY(3, 0, KEY_8),
+	KEY(3, 1, KEY_5),
+	KEY(3, 2, KEY_F12),
+	KEY(3, 3, KEY_F3),
+	KEY(3, 4, KEY_F8),
+	KEY(3, 5, KEY_END),
+	KEY(4, 0, KEY_7),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_F11),
+	KEY(4, 3, KEY_F1),
+	KEY(4, 4, KEY_F4),
+	KEY(4, 5, KEY_ESC),
+	KEY(5, 0, KEY_F13),
+	KEY(5, 1, KEY_F14),
+	KEY(5, 2, KEY_F15),
+	KEY(5, 3, KEY_F16),
+	KEY(5, 4, KEY_SLEEP),
+	0
+};
+
+static struct mtd_partition h2_nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
 	      .name		= "bootloader",
@@ -71,26 +116,26 @@ static struct mtd_partition h2_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h2_flash_data = {
+static struct flash_platform_data h2_nor_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
-	.parts		= h2_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_partitions),
+	.parts		= h2_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
 };
 
-static struct resource h2_flash_resource = {
+static struct resource h2_nor_resource = {
 	/* This is on CS3, wherever it's mapped */
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device h2_flash_device = {
+static struct platform_device h2_nor_device = {
 	.name		= "omapflash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &h2_flash_data,
+		.platform_data	= &h2_nor_data,
 	},
 	.num_resources	= 1,
-	.resource	= &h2_flash_resource,
+	.resource	= &h2_nor_resource,
 };
 
 static struct resource h2_smc91x_resources[] = {
@@ -113,9 +158,119 @@ static struct platform_device h2_smc91x_device = {
 	.resource	= h2_smc91x_resources,
 };
 
+static struct resource h2_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data h2_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = h2_keymap,
+	.rep	= 1,
+};
+
+static struct platform_device h2_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &h2_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(h2_kp_resources),
+	.resource	= h2_kp_resources,
+};
+
+#define H2_IRDA_FIRSEL_GPIO_PIN	17
+
+#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
+static int h2_transceiver_mode(struct device *dev, int state)
+{
+	if (state & IR_SIRMODE)
+		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
+	else    /* MIR/FIR */
+		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);
+
+	return 0;
+}
+#endif
+
+static struct omap_irda_config h2_irda_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource h2_irda_resources[] = {
+	[0] = {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+static struct platform_device h2_irda_device = {
+	.name		= "omapirda",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h2_irda_data,
+	},
+	.num_resources	= ARRAY_SIZE(h2_irda_resources),
+	.resource	= h2_irda_resources,
+};
+
+static struct platform_device h2_lcd_device = {
+	.name		= "lcd_h2",
+	.id		= -1,
+};
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+	.spcr1 = RINTM(3) | RRST,
+	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
+	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
+	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+	.srgr1 = FWID(15),
+	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
+
+	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
+	//.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+	.name                   = "H2 TSC2101",
+	.mcbsp_regs_alsa        = &mcbsp_regs,
+	.codec_configure_dev    = NULL, // tsc2101_configure,
+	.codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
+	.codec_clock_setup      = NULL, // tsc2101_clock_setup,
+	.codec_clock_on         = NULL, // tsc2101_clock_on,
+	.codec_clock_off        = NULL, // tsc2101_clock_off,
+	.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+};
+
+static struct platform_device h2_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+	.id	= 1,
+	.dev = {
+		.platform_data	= &alsa_config,
+	},
+};
+
 static struct platform_device *h2_devices[] __initdata = {
-	&h2_flash_device,
+	&h2_nor_device,
 	&h2_smc91x_device,
+	&h2_irda_device,
+	&h2_kp_device,
+	&h2_lcd_device,
+	&h2_mcbsp1_device,
 };
 
 static void __init h2_init_smc91x(void)
@@ -164,7 +319,6 @@ static struct omap_uart_config h2_uart_config __initdata = {
 };
 
 static struct omap_lcd_config h2_lcd_config __initdata = {
-	.panel_name	= "h2",
 	.ctrl_name	= "internal",
 };
 
@@ -177,16 +331,34 @@ static struct omap_board_config_kernel h2_config[] = {
 
 static void __init h2_init(void)
 {
-	/* NOTE: revC boards support NAND-boot, which can put NOR on CS2B
-	 * and NAND (either 16bit or 8bit) on CS3.
+	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
+	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
+	 * notice whether a NAND chip is enabled at probe time.
+	 *
+	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
+	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
+	 * detecting that in code here, to avoid probing every possible flash
+	 * configuration...
 	 */
-	h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys();
-	h2_flash_resource.end += SZ_32M - 1;
+	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
+	h2_nor_resource.end += SZ_32M - 1;
+
+	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
 	/* MMC:  card detect and WP */
 	// omap_cfg_reg(U19_ARMIO1);		/* CD */
 	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
 
+	/* Irda */
+#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
+	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
+	if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
+		omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
+		h2_irda_data.transceiver_mode = h2_transceiver_mode;
+	}
+#endif
+
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
 	omap_board_config_size = ARRAY_SIZE(h2_config);