[ARM] 3433/1: ARM: OMAP: 8/8 Update board files

Patch from Tony Lindgren

This patch syncs OMAP board support with linux-omap tree.
The highlights of the patch are:
- Add support for Nokia 770 by Juha Yrjola
- Add support for Samsung Apollon by Kyungmin Park
- Add support for Amstrad E3 videophone by Jonathan McDowell
- Remove board-netstar.c board support as requested by Ladislav Michl
- Do platform_device registration in board files by Komal Shah et al.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 264 insertions, 13 deletions

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index d9f38626599..4b8d0ec73cb 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -21,8 +21,11 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/errno.h>
+#include <linux/workqueue.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -33,15 +36,59 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/gpio.h>
+#include <asm/arch/gpioexpander.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/dma.h>
 #include <asm/arch/common.h>
 
 extern int omap_gpio_init(void);
 
-static struct mtd_partition h3_partitions[] = {
+static int h3_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_F10),
+	KEY(0, 4, KEY_F5),
+	KEY(0, 5, KEY_9),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_2),
+	KEY(1, 3, KEY_F9),
+	KEY(1, 4, KEY_F7),
+	KEY(1, 5, KEY_0),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_6),
+	KEY(2, 2, KEY_1),
+	KEY(2, 3, KEY_F2),
+	KEY(2, 4, KEY_F6),
+	KEY(2, 5, KEY_HOME),
+	KEY(3, 0, KEY_8),
+	KEY(3, 1, KEY_5),
+	KEY(3, 2, KEY_F12),
+	KEY(3, 3, KEY_F3),
+	KEY(3, 4, KEY_F8),
+	KEY(3, 5, KEY_END),
+	KEY(4, 0, KEY_7),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_F11),
+	KEY(4, 3, KEY_F1),
+	KEY(4, 4, KEY_F4),
+	KEY(4, 5, KEY_ESC),
+	KEY(5, 0, KEY_F13),
+	KEY(5, 1, KEY_F14),
+	KEY(5, 2, KEY_F15),
+	KEY(5, 3, KEY_F16),
+	KEY(5, 4, KEY_SLEEP),
+	0
+};
+
+
+static struct mtd_partition nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
 	      .name		= "bootloader",
@@ -72,26 +119,80 @@ static struct mtd_partition h3_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h3_flash_data = {
+static struct flash_platform_data nor_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
-	.parts		= h3_partitions,
-	.nr_parts	= ARRAY_SIZE(h3_partitions),
+	.parts		= nor_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
 
-static struct resource h3_flash_resource = {
+static struct resource nor_resource = {
 	/* This is on CS3, wherever it's mapped */
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device flash_device = {
+static struct platform_device nor_device = {
 	.name		= "omapflash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &h3_flash_data,
+		.platform_data	= &nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nor_resource,
+};
+
+static struct mtd_partition nand_partitions[] = {
+#if 0
+	/* REVISIT: enable these partitions if you make NAND BOOT work */
+	{
+		.name		= "xloader",
+		.offset		= 0,
+		.size		= 64 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 192 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * SZ_1M,
+	},
+#endif
+	{
+		.name		= "filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+/* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
+static struct nand_platform_data nand_data = {
+	.options	= NAND_SAMSUNG_LP_OPTIONS,
+	.parts		= nand_partitions,
+	.nr_parts	= ARRAY_SIZE(nand_partitions),
+};
+
+static struct resource nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+	.name		= "omapnand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nand_data,
 	},
 	.num_resources	= 1,
-	.resource	= &h3_flash_resource,
+	.resource	= &nand_resource,
 };
 
 static struct resource smc91x_resources[] = {
@@ -138,10 +239,136 @@ static struct platform_device intlat_device = {
 	.resource       = intlat_resources,
 };
 
+static struct resource h3_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data h3_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = h3_keymap,
+	.rep	= 1,
+};
+
+static struct platform_device h3_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &h3_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(h3_kp_resources),
+	.resource	= h3_kp_resources,
+};
+
+
+/* Select between the IrDA and aGPS module
+ */
+static int h3_select_irda(struct device *dev, int state)
+{
+	unsigned char expa;
+	int err = 0;
+
+	if ((err = read_gpio_expa(&expa, 0x26))) {
+		printk(KERN_ERR "Error reading from I/O EXPANDER \n");
+		return err;
+	}
+
+	/* 'P6' enable/disable IRDA_TX and IRDA_RX */
+	if (state & IR_SEL) { /* IrDA */
+		if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
+			printk(KERN_ERR "Error writing to I/O EXPANDER \n");
+			return err;
+		}
+	} else {
+		if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
+			printk(KERN_ERR "Error writing to I/O EXPANDER \n");
+			return err;
+		}
+	}
+	return err;
+}
+
+static void set_trans_mode(void *data)
+{
+	int *mode = data;
+	unsigned char expa;
+	int err = 0;
+
+	if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
+		printk(KERN_ERR "Error reading from I/O expander\n");
+	}
+
+	expa &= ~0x03;
+
+	if (*mode & IR_SIRMODE) {
+		expa |= 0x01;
+	} else { /* MIR/FIR */
+		expa |= 0x03;
+	}
+
+	if ((err = write_gpio_expa(expa, 0x27)) != 0) {
+		printk(KERN_ERR "Error writing to I/O expander\n");
+	}
+}
+
+static int h3_transceiver_mode(struct device *dev, int mode)
+{
+	struct omap_irda_config *irda_config = dev->platform_data;
+
+	cancel_delayed_work(&irda_config->gpio_expa);
+	PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
+	schedule_work(&irda_config->gpio_expa);
+
+	return 0;
+}
+
+static struct omap_irda_config h3_irda_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
+	.transceiver_mode	= h3_transceiver_mode,
+	.select_irda	 	= h3_select_irda,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource h3_irda_resources[] = {
+	[0] = {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device h3_irda_device = {
+	.name		= "omapirda",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h3_irda_data,
+	},
+	.num_resources	= ARRAY_SIZE(h3_irda_resources),
+	.resource	= h3_irda_resources,
+};
+
+static struct platform_device h3_lcd_device = {
+	.name		= "lcd_h3",
+	.id		= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&flash_device,
+	&nor_device,
+	&nand_device,
         &smc91x_device,
 	&intlat_device,
+	&h3_irda_device,
+	&h3_kp_device,
+	&h3_lcd_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -171,7 +398,6 @@ static struct omap_uart_config h3_uart_config __initdata = {
 };
 
 static struct omap_lcd_config h3_lcd_config __initdata = {
-	.panel_name	= "h3",
 	.ctrl_name	= "internal",
 };
 
@@ -182,11 +408,36 @@ static struct omap_board_config_kernel h3_config[] = {
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
+#define H3_NAND_RB_GPIO_PIN	10
+
+static int nand_dev_ready(struct nand_platform_data *data)
+{
+	return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN);
+}
+
 static void __init h3_init(void)
 {
-	h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys();
-	h3_flash_resource.end += OMAP_CS3_SIZE - 1;
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
+	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
+	 * notice whether a NAND chip is enabled at probe time.
+	 *
+	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
+	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
+	 * to avoid probing every possible flash configuration...
+	 */
+	nor_resource.end = nor_resource.start = omap_cs3_phys();
+	nor_resource.end += SZ_32M - 1;
+
+	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
+	nand_resource.end += SZ_4K - 1;
+	if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN)))
+		nand_data.dev_ready = nand_dev_ready;
+
+	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
+	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
+	omap_cfg_reg(V2_1710_GPIO10);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	omap_board_config = h3_config;
 	omap_board_config_size = ARRAY_SIZE(h3_config);
 	omap_serial_init();