diff options
| author | Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> | 2009-10-22 14:47:42 -0700 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2009-10-22 14:47:42 -0700 |
| commit | c33da3a80074094303d643a90ef589330b491270 (patch) | |
| tree | 64c8a0d9a56a4590e21641c04deae0b6a66eb8c0 /arch/arm/mach-omap1/board-palmte.c | |
| parent | dcc730dc9d7614fdaf6bce73d6e8ffe47c8820b1 (diff) | |
omap1: Fix redundant UARTs pin muxing that can break other hardware support
Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart
and OMAP_TAG_UART. This works for mach-omap2, but causes issues on
mach-omap1 for some boards as the mach-omap1 serial.c was muxing
pins based on the enabled_uart flag for 15xx.
Fix this by muxing pins in board-*.c files for the 15xx boards for
the uart ports that had enabled_uart flag set before the commit
above.
Tested on Amsdtrad Delta only.
Note that in the future we should add support for powering down
the uarts with a timer like mach-omap2/serial.c does. Otherwise
the enabled uarts will be blocking retention-while-idle.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1/board-palmte.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd0431b0d..4de258420f3 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void) static void __init omap_palmte_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); |