[PATCH] ARM: 2806/1: OMAP update 5/11: Move board files into mach-omap1 directory

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 board files into mach-omap1 directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 files changed, 1551 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
new file mode 100644
index 00000000000..e2d338488d1
--- /dev/null
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-omap1/board-generic.c
+ *
+ * Modified from board-innovator1510.c
+ *
+ * Code for generic OMAP board. Should work on many OMAP systems where
+ * the device drivers take care of all the necessary hardware initialization.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+
+#include "common.h"
+
+static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+/* assume no Mini-AB port */
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_usb_config generic1510_usb_config __initdata = {
+	.register_host	= 1,
+	.register_dev	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 3,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct omap_usb_config generic1610_usb_config __initdata = {
+	.register_host	= 1,
+	.register_dev	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 6,
+};
+#endif
+
+static struct omap_board_config_kernel generic_config[] = {
+	{ OMAP_TAG_USB,           NULL },
+};
+
+static void __init omap_generic_init(void)
+{
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510()) {
+		generic_config[0].data = &generic1510_usb_config;
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (!cpu_is_omap1510()) {
+		generic_config[0].data = &generic1610_usb_config;
+	}
+#endif
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
+	omap_serial_init(generic_serial_ports);
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_io();
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
+	/* Maintainer: Tony Lindgren <tony@atomide.com> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
new file mode 100644
index 00000000000..02c7e335d3e
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h2.c
+ *
+ * Board specific inits for OMAP-1610 H2
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * H2 specific changes and cleanup
+ * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern int omap_gpio_init(void);
+
+static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition h2_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data h2_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= h2_partitions,
+	.nr_parts	= ARRAY_SIZE(h2_partitions),
+};
+
+static struct resource h2_flash_resource = {
+	.start		= OMAP_CS2B_PHYS,
+	.end		= OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h2_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h2_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h2_flash_resource,
+};
+
+static struct resource h2_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP1610_ETHR_START,		/* Physical */
+		.end	= OMAP1610_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(0),
+		.end	= OMAP_GPIO_IRQ(0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device h2_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
+	.resource	= h2_smc91x_resources,
+};
+
+static struct platform_device *h2_devices[] __initdata = {
+	&h2_flash_device,
+	&h2_smc91x_device,
+};
+
+static void __init h2_init_smc91x(void)
+{
+	if ((omap_request_gpio(0)) < 0) {
+		printk("Error requesting gpio 0 for smc91x irq\n");
+		return;
+	}
+	omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
+}
+
+void h2_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	h2_init_smc91x();
+}
+
+static struct omap_usb_config h2_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg		= 2,
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 19,	// 0:host(off) 1:dev|otg 2:disabled
+	// .hmc_mode	= 21,	// 0:host(off) 1:dev(loopback) 2:host(loopback)
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
+	.hmc_mode	= 20,	// 1:dev|otg(off) 1:host 2:disabled
+#endif
+
+	.pins[1]	= 3,
+};
+
+static struct omap_mmc_config h2_mmc_config __initdata = {
+	.mmc_blocks		= 1,
+	.mmc1_power_pin		= -1,	/* tps65010 gpio3 */
+	.mmc1_switch_pin	= OMAP_MPUIO(1),
+};
+
+static struct omap_board_config_kernel h2_config[] = {
+	{ OMAP_TAG_USB,           &h2_usb_config },
+	{ OMAP_TAG_MMC,           &h2_mmc_config },
+};
+
+static void __init h2_init(void)
+{
+	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
+	omap_board_config = h2_config;
+	omap_board_config_size = ARRAY_SIZE(h2_config);
+}
+
+static void __init h2_map_io(void)
+{
+	omap_map_io();
+	omap_serial_init(h2_serial_ports);
+}
+
+MACHINE_START(OMAP_H2, "TI-H2")
+	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= h2_map_io,
+	.init_irq	= h2_init_irq,
+	.init_machine	= h2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
new file mode 100644
index 00000000000..3ff6eb8c8f2
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -0,0 +1,207 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h3.c
+ *
+ * This file contains OMAP1710 H3 specific code.
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern int omap_gpio_init(void);
+
+static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition h3_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data h3_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= h3_partitions,
+	.nr_parts	= ARRAY_SIZE(h3_partitions),
+};
+
+static struct resource h3_flash_resource = {
+	.start		= OMAP_CS2B_PHYS,
+	.end		= OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h3_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h3_flash_resource,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP1710_ETHR_START,		/* Physical */
+		.end	= OMAP1710_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(40),
+		.end	= OMAP_GPIO_IRQ(40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#define GPTIMER_BASE		0xFFFB1400
+#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
+#define GPTIMER_REGS_SIZE	0x46
+
+static struct resource intlat_resources[] = {
+	[0] = {
+		.start  = GPTIMER_REGS(0),	      /* Physical */
+		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = INT_1610_GPTIMER1,
+		.end    = INT_1610_GPTIMER1,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device intlat_device = {
+	.name	   = "omap_intlat",
+	.id	     = 0,
+	.num_resources  = ARRAY_SIZE(intlat_resources),
+	.resource       = intlat_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&flash_device,
+        &smc91x_device,
+	&intlat_device,
+};
+
+static struct omap_usb_config h3_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg	    = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
+#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+	.pins[1]	= 3,
+};
+
+static struct omap_board_config_kernel h3_config[] = {
+	{ OMAP_TAG_USB,	 &h3_usb_config },
+};
+
+static void __init h3_init(void)
+{
+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init h3_init_smc91x(void)
+{
+	omap_cfg_reg(W15_1710_GPIO40);
+	if (omap_request_gpio(40) < 0) {
+		printk("Error requesting gpio 40 for smc91x irq\n");
+		return;
+	}
+	omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE);
+}
+
+void h3_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	h3_init_smc91x();
+}
+
+static void __init h3_map_io(void)
+{
+	omap_map_io();
+	omap_serial_init(h3_serial_ports);
+}
+
+MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
+	/* Maintainer: Texas Instruments, Inc. */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= h3_map_io,
+	.init_irq	= h3_init_irq,
+	.init_machine	= h3_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
new file mode 100644
index 00000000000..944e235d78a
--- /dev/null
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -0,0 +1,282 @@
+/*
+ * linux/arch/arm/mach-omap1/board-innovator.c
+ *
+ * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/fpga.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition innovator_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash1 is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data innovator_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= innovator_partitions,
+	.nr_parts	= ARRAY_SIZE(innovator_partitions),
+};
+
+static struct resource innovator_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device innovator_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &innovator_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &innovator_flash_resource,
+};
+
+#ifdef CONFIG_ARCH_OMAP1510
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc innovator1510_io_desc[] __initdata = {
+{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
+	MT_DEVICE },
+};
+
+static struct resource innovator1510_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
+		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP1510_INT_ETHER,
+		.end	= OMAP1510_INT_ETHER,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device innovator1510_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
+	.resource	= innovator1510_smc91x_resources,
+};
+
+static struct platform_device *innovator1510_devices[] __initdata = {
+	&innovator_flash_device,
+	&innovator1510_smc91x_device,
+};
+
+#endif /* CONFIG_ARCH_OMAP1510 */
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+static struct resource innovator1610_smc91x_resources[] = {
+	[0] = {
+		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
+		.end	= INNOVATOR1610_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(0),
+		.end	= OMAP_GPIO_IRQ(0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device innovator1610_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
+	.resource	= innovator1610_smc91x_resources,
+};
+
+static struct platform_device *innovator1610_devices[] __initdata = {
+	&innovator_flash_device,
+	&innovator1610_smc91x_device,
+};
+
+#endif /* CONFIG_ARCH_OMAP16XX */
+
+static void __init innovator_init_smc91x(void)
+{
+	if (cpu_is_omap1510()) {
+		fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+			   OMAP1510_FPGA_RST);
+		udelay(750);
+	} else {
+		if ((omap_request_gpio(0)) < 0) {
+			printk("Error requesting gpio 0 for smc91x irq\n");
+			return;
+		}
+		omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
+	}
+}
+
+void innovator_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510()) {
+		omap1510_fpga_init_irq();
+	}
+#endif
+	innovator_init_smc91x();
+}
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_usb_config innovator1510_usb_config __initdata = {
+	/* for bundled non-standard host and peripheral cables */
+	.hmc_mode	= 4,
+
+	.register_host	= 1,
+	.pins[1]	= 6,
+	.pins[2]	= 6,		/* Conflicts with UART2 */
+
+	.register_dev	= 1,
+	.pins[0]	= 2,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_usb_config h2_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg		= 2,
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 19,	// 0:host(off) 1:dev|otg 2:disabled
+	// .hmc_mode	= 21,	// 0:host(off) 1:dev(loopback) 2:host(loopback)
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+	.hmc_mode	= 20,	// 1:dev|otg(off) 1:host 2:disabled
+#endif
+
+	.pins[1]	= 3,
+};
+#endif
+
+static struct omap_board_config_kernel innovator_config[] = {
+	{ OMAP_TAG_USB,         NULL },
+};
+
+static void __init innovator_init(void)
+{
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510()) {
+		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (!cpu_is_omap1510()) {
+		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
+	}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510())
+		innovator_config[0].data = &innovator1510_usb_config;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (cpu_is_omap1610())
+		innovator_config[0].data = &h2_usb_config;
+#endif
+	omap_board_config = innovator_config;
+	omap_board_config_size = ARRAY_SIZE(innovator_config);
+}
+
+static void __init innovator_map_io(void)
+{
+	omap_map_io();
+
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510()) {
+		iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+		udelay(10);	/* Delay needed for FPGA */
+
+		/* Dump the Innovator FPGA rev early - useful info for support. */
+		printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
+		       fpga_read(OMAP1510_FPGA_REV_HIGH),
+		       fpga_read(OMAP1510_FPGA_REV_LOW),
+		       fpga_read(OMAP1510_FPGA_BOARD_REV));
+	}
+#endif
+	omap_serial_init(innovator_serial_ports);
+}
+
+MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= innovator_map_io,
+	.init_irq	= innovator_init_irq,
+	.init_machine	= innovator_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
new file mode 100644
index 00000000000..8c653734d5a
--- /dev/null
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -0,0 +1,153 @@
+/*
+ * Modified from board-generic.c
+ *
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Code for Netstar OMAP board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern void __init omap_init_time(void);
+extern int omap_gpio_init(void);
+
+static struct resource netstar_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_CS1_PHYS + 0x300,
+		.end	= OMAP_CS1_PHYS + 0x300 + 16,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(8),
+		.end	= OMAP_GPIO_IRQ(8),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device netstar_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(netstar_smc91x_resources),
+	.resource	= netstar_smc91x_resources,
+};
+
+static struct platform_device *netstar_devices[] __initdata = {
+	&netstar_smc91x_device,
+};
+
+static void __init netstar_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init netstar_init(void)
+{
+	/* green LED */
+	omap_request_gpio(4);
+	omap_set_gpio_direction(4, 0);
+	/* smc91x reset */
+	omap_request_gpio(7);
+	omap_set_gpio_direction(7, 0);
+	omap_set_gpio_dataout(7, 1);
+	udelay(2);	/* wait at least 100ns */
+	omap_set_gpio_dataout(7, 0);
+	mdelay(50);	/* 50ms until PHY ready */
+	/* smc91x interrupt pin */
+	omap_request_gpio(8);
+	omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
+
+	omap_request_gpio(12);
+	omap_request_gpio(13);
+	omap_request_gpio(14);
+	omap_request_gpio(15);
+	omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE);
+	omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE);
+	omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE);
+	omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE);
+
+	platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices));
+
+	/* Switch on green LED */
+	omap_set_gpio_dataout(4, 0);
+	/* Switch off red LED */
+	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
+	omap_writeb(0x80, OMAP_LPG1_LCR);
+}
+
+static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init netstar_map_io(void)
+{
+	omap_map_io();
+	omap_serial_init(omap_serial_ports);
+}
+
+#define MACHINE_PANICED		1
+#define MACHINE_REBOOTING	2
+#define MACHINE_REBOOT		4
+static unsigned long machine_state;
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+	 void *ptr)
+{
+	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
+		return NOTIFY_DONE;
+
+	/* Switch off green LED */
+	omap_set_gpio_dataout(4, 1);
+	/* Flash red LED */
+	omap_writeb(0x78, OMAP_LPG1_LCR);
+	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+	.notifier_call	= panic_event,
+};
+
+static int __init netstar_late_init(void)
+{
+	/* TODO: Setup front panel switch here */
+
+	/* Setup panic notifier */
+	notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
+}
+
+postcore_initcall(netstar_late_init);
+
+MACHINE_START(NETSTAR, "NetStar OMAP5910")
+	/* Maintainer: Ladislav Michl <michl@2n.cz> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= netstar_map_io,
+	.init_irq	= netstar_init_irq,
+	.init_machine	= netstar_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
new file mode 100644
index 00000000000..b9e3273ac0b
--- /dev/null
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -0,0 +1,171 @@
+/*
+ * linux/arch/arm/mach-omap1/board-osk.c
+ *
+ * Board specific init for OMAP5912 OSK
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
+
+#include "common.h"
+
+static struct map_desc osk5912_io_desc[] __initdata = {
+{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
+	MT_DEVICE },
+};
+
+static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
+
+static struct resource osk5912_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_OSK_ETHR_START,		/* Physical */
+		.end	= OMAP_OSK_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(0),
+		.end	= OMAP_GPIO_IRQ(0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
+	.resource	= osk5912_smc91x_resources,
+};
+
+static struct resource osk5912_cf_resources[] = {
+	[0] = {
+		.start	= OMAP_GPIO_IRQ(62),
+		.end	= OMAP_GPIO_IRQ(62),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_cf_device = {
+	.name		= "omap_cf",
+	.id		= -1,
+	.dev = {
+		.platform_data	= (void *) 2 /* CS2 */,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
+	.resource	= osk5912_cf_resources,
+};
+
+static struct platform_device *osk5912_devices[] __initdata = {
+	&osk5912_smc91x_device,
+	&osk5912_cf_device,
+};
+
+static void __init osk_init_smc91x(void)
+{
+	if ((omap_request_gpio(0)) < 0) {
+		printk("Error requesting gpio 0 for smc91x irq\n");
+		return;
+	}
+	omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
+
+	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
+	EMIFS_CCS(1) |= 0x2;
+}
+
+static void __init osk_init_cf(void)
+{
+	omap_cfg_reg(M7_1610_GPIO62);
+	if ((omap_request_gpio(62)) < 0) {
+		printk("Error requesting gpio 62 for CF irq\n");
+		return;
+	}
+	/* it's really active-low */
+	omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE);
+}
+
+void osk_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	osk_init_smc91x();
+	osk_init_cf();
+}
+
+static struct omap_usb_config osk_usb_config __initdata = {
+	/* has usb host connector (A) ... for development it can also
+	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
+	 * a peripheral.
+	 */
+#ifdef	CONFIG_USB_GADGET_OMAP
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+#else
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.rwc		= 1,
+#endif
+	.pins[0]	= 2,
+};
+
+static struct omap_board_config_kernel osk_config[] = {
+	{ OMAP_TAG_USB,           &osk_usb_config },
+};
+
+static void __init osk_init(void)
+{
+	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
+	omap_board_config = osk_config;
+	omap_board_config_size = ARRAY_SIZE(osk_config);
+	USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+}
+
+static void __init osk_map_io(void)
+{
+	omap_map_io();
+	iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
+	omap_serial_init(osk_serial_ports);
+}
+
+MACHINE_START(OMAP_OSK, "TI-OSK")
+	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= osk_map_io,
+	.init_irq	= osk_init_irq,
+	.init_machine	= osk_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
new file mode 100644
index 00000000000..0d460522fca
--- /dev/null
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -0,0 +1,191 @@
+/*
+ * linux/arch/arm/mach-omap1/board-perseus2.c
+ *
+ * Modified from board-generic.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+
+#include "common.h"
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
+		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_730_MPU_EXT_NIRQ,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
+
+static struct mtd_partition p2_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	},
+};
+
+static struct flash_platform_data p2_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= p2_partitions,
+	.nr_parts	= ARRAY_SIZE(p2_partitions),
+};
+
+static struct resource p2_flash_resource = {
+	.start		= OMAP_FLASH_0_START,
+	.end		= OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device p2_flash_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &p2_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &p2_flash_resource,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&p2_flash_device,
+	&smc91x_device,
+};
+
+static void __init omap_perseus2_init(void)
+{
+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init perseus2_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
+void omap_perseus2_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+	perseus2_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_perseus2_io_desc[] __initdata = {
+	{H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
+	 MT_DEVICE},
+};
+
+static void __init omap_perseus2_map_io(void)
+{
+	omap_map_io();
+	iotable_init(omap_perseus2_io_desc,
+		     ARRAY_SIZE(omap_perseus2_io_desc));
+
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support trough the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_serial_init(p2_serial_ports);
+}
+
+MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
+	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_perseus2_map_io,
+	.init_irq	= omap_perseus2_init_irq,
+	.init_machine	= omap_perseus2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
new file mode 100644
index 00000000000..d882f43658a
--- /dev/null
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-omap1/board-voiceblue.c
+ *
+ * Modified from board-generic.c
+ *
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern void omap_init_time(void);
+extern int omap_gpio_init(void);
+
+static struct plat_serial8250_port voiceblue_ports[] = {
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
+		.irq		= OMAP_GPIO_IRQ(12),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
+		.irq		= OMAP_GPIO_IRQ(13),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
+		.irq		= OMAP_GPIO_IRQ(14),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
+		.irq		= OMAP_GPIO_IRQ(15),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= voiceblue_ports,
+	},
+};
+
+static int __init ext_uart_init(void)
+{
+	return platform_device_register(&serial_device);
+}
+arch_initcall(ext_uart_init);
+
+static struct resource voiceblue_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_CS2_PHYS + 0x300,
+		.end	= OMAP_CS2_PHYS + 0x300 + 16,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(8),
+		.end	= OMAP_GPIO_IRQ(8),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device voiceblue_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
+	.resource	= voiceblue_smc91x_resources,
+};
+
+static struct platform_device *voiceblue_devices[] __initdata = {
+	&voiceblue_smc91x_device,
+};
+
+static struct omap_usb_config voiceblue_usb_config __initdata = {
+	.hmc_mode	= 3,
+	.register_host	= 1,
+	.register_dev   = 1,
+	.pins[0]	= 2,
+	.pins[1]	= 6,
+	.pins[2]	= 6,
+};
+
+static struct omap_board_config_kernel voiceblue_config[] = {
+	{ OMAP_TAG_USB, &voiceblue_usb_config },
+};
+
+static void __init voiceblue_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init voiceblue_init(void)
+{
+	/* There is a good chance board is going up, so enable Power LED
+	 * (it is connected through invertor) */
+	omap_writeb(0x00, OMAP_LPG1_LCR);
+	/* Watchdog */
+	omap_request_gpio(0);
+	/* smc91x reset */
+	omap_request_gpio(7);
+	omap_set_gpio_direction(7, 0);
+	omap_set_gpio_dataout(7, 1);
+	udelay(2);	/* wait at least 100ns */
+	omap_set_gpio_dataout(7, 0);
+	mdelay(50);	/* 50ms until PHY ready */
+	/* smc91x interrupt pin */
+	omap_request_gpio(8);
+	omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
+	/* 16C554 reset*/
+	omap_request_gpio(6);
+	omap_set_gpio_direction(6, 0);
+	omap_set_gpio_dataout(6, 0);
+	/* 16C554 interrupt pins */
+	omap_request_gpio(12);
+	omap_request_gpio(13);
+	omap_request_gpio(14);
+	omap_request_gpio(15);
+	omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
+	omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
+	omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
+	omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
+
+	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
+	omap_board_config = voiceblue_config;
+	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+}
+
+static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init voiceblue_map_io(void)
+{
+	omap_map_io();
+	omap_serial_init(omap_serial_ports);
+}
+
+#define MACHINE_PANICED		1
+#define MACHINE_REBOOTING	2
+#define MACHINE_REBOOT		4
+static unsigned long machine_state;
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+	 void *ptr)
+{
+	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
+		return NOTIFY_DONE;
+
+	/* Flash Power LED
+	 * (TODO: Enable clock right way (enabled in bootloader already)) */
+	omap_writeb(0x78, OMAP_LPG1_LCR);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+	.notifier_call	= panic_event,
+};
+
+static int __init setup_notifier(void)
+{
+	/* Setup panic notifier */
+	notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
+}
+
+postcore_initcall(setup_notifier);
+
+static int wdt_gpio_state;
+
+void voiceblue_wdt_enable(void)
+{
+	omap_set_gpio_direction(0, 0);
+	omap_set_gpio_dataout(0, 0);
+	omap_set_gpio_dataout(0, 1);
+	omap_set_gpio_dataout(0, 0);
+	wdt_gpio_state = 0;
+}
+
+void voiceblue_wdt_disable(void)
+{
+	omap_set_gpio_dataout(0, 0);
+	omap_set_gpio_dataout(0, 1);
+	omap_set_gpio_dataout(0, 0);
+	omap_set_gpio_direction(0, 1);
+}
+
+void voiceblue_wdt_ping(void)
+{
+	if (test_bit(MACHINE_REBOOT, &machine_state))
+		return;
+
+	wdt_gpio_state = !wdt_gpio_state;
+	omap_set_gpio_dataout(0, wdt_gpio_state);
+}
+
+void voiceblue_reset(void)
+{
+	set_bit(MACHINE_REBOOT, &machine_state);
+	voiceblue_wdt_enable();
+	while (1) ;
+}
+
+EXPORT_SYMBOL(voiceblue_wdt_enable);
+EXPORT_SYMBOL(voiceblue_wdt_disable);
+EXPORT_SYMBOL(voiceblue_wdt_ping);
+
+MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
+	/* Maintainer: Ladislav Michl <michl@2n.cz> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= voiceblue_map_io,
+	.init_irq	= voiceblue_init_irq,
+	.init_machine	= voiceblue_init,
+	.timer		= &omap_timer,
+MACHINE_END