Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

25 files changed, 447 insertions, 409 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 79f0b1f8497..10a301e3243 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -4,16 +4,19 @@ comment "OMAP Core Type"
 config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
+	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
 	bool "OMAP15xx Based System"
+	select CPU_ARM925T
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
+	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index db789461fca..30308294e7c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -205,7 +205,7 @@ static struct platform_device *devices[] __initdata = {
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
 static struct omap_uart_config fsample_uart_config __initdata = {
@@ -223,8 +223,9 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
-	if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
-		nand_data.dev_ready = nand_dev_ready;
+	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	nand_data.dev_ready = nand_dev_ready;
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index ab9ee5820c4..409fa56d0a8 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,90 +12,68 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
-static int h2_mmc_set_power(struct device *dev, int slot, int power_on,
+static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
+	if (power_on)
+		gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
+	else
+		gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
 
 	return 0;
 }
 
-static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+static int mmc_late_init(struct device *dev)
 {
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
+	int ret;
 
-	return 0;
-}
+	ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	if (ret < 0)
+		return ret;
 
-static int h2_mmc_get_cover_state(struct device *dev, int slot)
-{
-	BUG_ON(slot != 0);
-
-	return slot_cover_open;
-}
-
-void h2_mmc_slot_cover_handler(void *arg, int state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot_cover_open = state;
-	omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int h2_mmc_late_init(struct device *dev)
-{
-	int ret = 0;
-
-	mmc_device = dev;
+	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
 
 	return ret;
 }
 
-static void h2_mmc_cleanup(struct device *dev)
+static void mmc_shutdown(struct device *dev)
 {
+	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
 }
 
-static struct omap_mmc_platform_data h2_mmc_data = {
+/*
+ * H2 could use the following functions tested:
+ * - mmc_get_cover_state that uses OMAP_MPUIO(1)
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ */
+static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.init                           = h2_mmc_late_init,
-	.cleanup                        = h2_mmc_cleanup,
+	.init				= mmc_late_init,
+	.shutdown			= mmc_shutdown,
+	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
-		.set_power              = h2_mmc_set_power,
-		.set_bus_mode           = h2_mmc_set_bus_mode,
-		.get_ro                 = NULL,
-		.get_cover_state        = h2_mmc_get_cover_state,
+		.set_power              = mmc_set_power,
 		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
 					  MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
 void __init h2_mmc_init(void)
 {
-	omap_set_mmc_info(1, &h2_mmc_data);
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
 }
 
 #else
@@ -104,7 +82,4 @@ void __init h2_mmc_init(void)
 {
 }
 
-void h2_mmc_slot_cover_handler(void *arg, int state)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 3b65914b914..b240c5f861d 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -250,11 +250,8 @@ static struct platform_device h2_kp_device = {
 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 static int h2_transceiver_mode(struct device *dev, int state)
 {
-	if (state & IR_SIRMODE)
-		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-	else    /* MIR/FIR */
-		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);
-
+	/* SIR when low, else MIR/FIR when HIGH */
+	gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE));
 	return 0;
 }
 #endif
@@ -342,16 +339,31 @@ static struct platform_device *h2_devices[] __initdata = {
 
 static void __init h2_init_smc91x(void)
 {
-	if ((omap_request_gpio(0)) < 0) {
+	if (gpio_request(0, "SMC91x irq") < 0) {
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
 }
 
+static int tps_setup(struct i2c_client *client, void *context)
+{
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
+				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= H2_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= tps_setup,
+};
+
 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("tps65010", 0x48),
 		.irq            = OMAP_GPIO_IRQ(58),
+		.platform_data	= &tps_board,
 	}, {
 		I2C_BOARD_INFO("isp1301_omap", 0x2d),
 		.irq		= OMAP_GPIO_IRQ(2),
@@ -381,15 +393,6 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_mmc_config h2_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.wire4		= 1,
-	},
-};
-
-extern struct omap_mmc_platform_data h2_mmc_data;
-
 static struct omap_uart_config h2_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -400,7 +403,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
 	{ OMAP_TAG_USB,		&h2_usb_config },
-	{ OMAP_TAG_MMC,		&h2_mmc_config },
 	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
@@ -409,7 +411,7 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
+	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
 }
 
 static void __init h2_init(void)
@@ -428,8 +430,9 @@ static void __init h2_init(void)
 
 	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
 	h2_nand_resource.end += SZ_4K - 1;
-	if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
-		h2_nand_data.dev_ready = h2_nand_dev_ready;
+	if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
@@ -441,10 +444,10 @@ static void __init h2_init(void)
 	/* Irda */
 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
-	if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
-		omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-		h2_irda_data.transceiver_mode = h2_transceiver_mode;
-	}
+	if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0)
+		BUG();
+	gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0);
+	h2_irda_data.transceiver_mode = h2_transceiver_mode;
 #endif
 
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 36085819098..fdfe793d56f 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,94 +12,55 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
-static int h3_mmc_set_power(struct device *dev, int slot, int power_on,
+static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
+	if (power_on)
+		gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
+	else
+		gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
 
 	return 0;
 }
 
-static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-	int ret = 0;
-
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
-
-	/* Treated on upper level */
-
-	return bus_mode;
-}
-
-static int h3_mmc_get_cover_state(struct device *dev, int slot)
-{
-	BUG_ON(slot != 0);
-
-	return slot_cover_open;
-}
-
-void h3_mmc_slot_cover_handler(void *arg, int state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot_cover_open = state;
-	omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int h3_mmc_late_init(struct device *dev)
-{
-	int ret = 0;
-
-	mmc_device = dev;
-
-	return ret;
-}
-
-static void h3_mmc_cleanup(struct device *dev)
-{
-}
-
-static struct omap_mmc_platform_data h3_mmc_data = {
+/*
+ * H3 could use the following functions tested:
+ * - mmc_get_cover_state that uses OMAP_MPUIO(1)
+ * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
+ */
+static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.init                           = h3_mmc_late_init,
-	.cleanup                        = h3_mmc_cleanup,
+	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
-		.set_power              = h3_mmc_set_power,
-		.set_bus_mode           = h3_mmc_set_bus_mode,
-		.get_ro                 = NULL,
-		.get_cover_state        = h3_mmc_get_cover_state,
+		.set_power              = mmc_set_power,
 		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
 					  MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
 void __init h3_mmc_init(void)
 {
-	omap_set_mmc_info(1, &h3_mmc_data);
+	int ret;
+
+	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
+
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
 }
 
 #else
@@ -108,7 +69,4 @@ void __init h3_mmc_init(void)
 {
 }
 
-void h3_mmc_slot_cover_handler(void *arg, int state)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index adfcd7b5139..5157eea9be3 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -447,15 +447,6 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_mmc_config h3_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.wire4		= 1,
-       },
-};
-
-extern struct omap_mmc_platform_data h3_mmc_data;
-
 static struct omap_uart_config h3_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -466,7 +457,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
 	{ OMAP_TAG_USB,		&h3_usb_config },
-	{ OMAP_TAG_MMC,		&h3_mmc_config },
 	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
@@ -498,7 +488,7 @@ static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN);
+	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
 }
 
 static void __init h3_init(void)
@@ -516,8 +506,9 @@ static void __init h3_init(void)
 
 	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
 	nand_resource.end += SZ_4K - 1;
-	if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN)))
-		nand_data.dev_ready = nand_dev_ready;
+	if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	nand_data.dev_ready = nand_dev_ready;
 
 	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
@@ -537,7 +528,7 @@ static void __init h3_init(void)
 static void __init h3_init_smc91x(void)
 {
 	omap_cfg_reg(W15_1710_GPIO40);
-	if (omap_request_gpio(40) < 0) {
+	if (gpio_request(40, "SMC91x irq") < 0) {
 		printk("Error requesting gpio 40 for smc91x irq\n");
 		return;
 	}
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cbc11be5cd2..af2fb907008 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -39,6 +39,7 @@
 #include <mach/common.h>
 #include <mach/mcbsp.h>
 #include <mach/omap-alsa.h>
+#include <mach/mmc.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
@@ -301,7 +302,7 @@ static void __init innovator_init_smc91x(void)
 			   OMAP1510_FPGA_RST);
 		udelay(750);
 	} else {
-		if ((omap_request_gpio(0)) < 0) {
+		if (gpio_request(0, "SMC91x irq") < 0) {
 			printk("Error requesting gpio 0 for smc91x irq\n");
 			return;
 		}
@@ -360,16 +361,49 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = {
 };
 #endif
 
-static struct omap_mmc_config innovator_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled 	= 1,
-		.wire4		= 1,
-		.wp_pin		= OMAP_MPUIO(3),
-		.power_pin	= -1,	/* FPGA F3 UIO42 */
-		.switch_pin	= -1,	/* FPGA F4 UIO43 */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	if (power_on)
+		fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+				OMAP1510_FPGA_POWER);
+	else
+		fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+				OMAP1510_FPGA_POWER);
+
+	return 0;
+}
+
+/*
+ * Innovator could use the following functions tested:
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ * - mmc_get_cover_state that uses FPGA F4 UIO43
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.slots[0]       = {
+		.set_power		= mmc_set_power,
+		.wires			= 4,
+		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+void __init innovator_mmc_init(void)
+{
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+}
+
+#else
+static inline void innovator_mmc_init(void)
+{
+}
+#endif
+
 static struct omap_uart_config innovator_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -377,7 +411,6 @@ static struct omap_uart_config innovator_uart_config __initdata = {
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_USB,         NULL },
 	{ OMAP_TAG_LCD,		NULL },
-	{ OMAP_TAG_MMC,		&innovator_mmc_config },
 	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
@@ -412,6 +445,7 @@ static void __init innovator_init(void)
 	omap_board_config_size = ARRAY_SIZE(innovator_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+	innovator_mmc_init();
 }
 
 static void __init innovator_map_io(void)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 38d9783ac6d..4970c402a59 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -35,6 +35,7 @@
 #include <mach/aic23.h>
 #include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
+#include <mach/mmc.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -102,7 +103,7 @@ static void mipid_shutdown(struct mipid_platform_data *pdata)
 {
 	if (pdata->nreset_gpio != -1) {
 		printk(KERN_INFO "shutdown LCD\n");
-		omap_set_gpio_dataout(pdata->nreset_gpio, 0);
+		gpio_set_value(pdata->nreset_gpio, 0);
 		msleep(120);
 	}
 }
@@ -124,13 +125,13 @@ static void mipid_dev_init(void)
 
 static void ads7846_dev_init(void)
 {
-	if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0)
+	if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 }
 
 static int ads7846_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO);
+	return !gpio_get_value(ADS7846_PENDOWN_GPIO);
 }
 
 static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
@@ -173,26 +174,68 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.pins[0]	= 6,
 };
 
-static struct omap_mmc_config nokia770_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-	.mmc[1] = {
-		.enabled	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#define NOKIA770_GPIO_MMC_POWER		41
+#define NOKIA770_GPIO_MMC_SWITCH	23
+
+static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	if (power_on)
+		gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
+	else
+		gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
+
+	return 0;
+}
+
+static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
+{
+	return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
+}
+
+static struct omap_mmc_platform_data nokia770_mmc2_data = {
+	.nr_slots                       = 1,
+	.dma_mask			= 0xffffffff,
+	.slots[0]       = {
+		.set_power		= nokia770_mmc_set_power,
+		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
+
+static void __init nokia770_mmc_init(void)
+{
+	int ret;
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
+	if (ret < 0) {
+		gpio_free(NOKIA770_GPIO_MMC_POWER);
+		return;
+	}
+	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
+
+	/* Only the second MMC controller is used */
+	nokia770_mmc_data[1] = &nokia770_mmc2_data;
+	omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
+}
+
+#else
+static inline void nokia770_mmc_init(void)
+{
+}
+#endif
+
 static struct omap_board_config_kernel nokia770_config[] __initdata = {
 	{ OMAP_TAG_USB,		NULL },
-	{ OMAP_TAG_MMC,		&nokia770_mmc_config },
 };
 
 #if	defined(CONFIG_OMAP_DSP)
@@ -228,9 +271,9 @@ static void nokia770_audio_pwr_up(void)
 	/* Turn on codec */
 	aic23_power_up();
 
-	if (omap_get_gpio_datain(HEADPHONE_GPIO))
+	if (gpio_get_value(HEADPHONE_GPIO))
 		/* HP not connected, turn on amplifier */
-		omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 1);
+		gpio_set_value(AMPLIFIER_CTRL_GPIO, 1);
 	else
 		/* HP connected, do not turn on amplifier */
 		printk("HP connected\n");
@@ -250,7 +293,7 @@ static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
 static void nokia770_audio_pwr_down(void)
 {
 	/* Turn off amplifier */
-	omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 0);
+	gpio_set_value(AMPLIFIER_CTRL_GPIO, 0);
 
 	/* Turn off codec: schedule delayed work */
 	schedule_delayed_work(&codec_power_down_work, HZ / 20);	/* 50ms */
@@ -335,6 +378,7 @@ static void __init omap_nokia770_init(void)
 	omap_dsp_init();
 	ads7846_dev_init();
 	mipid_dev_init();
+	nokia770_mmc_init();
 }
 
 static void __init omap_nokia770_map_io(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3e766e49f7c..ff9e67baa5c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -188,7 +188,8 @@ static struct gpio_led tps_leds[] = {
 	/* NOTE:  D9 and D2 have hardware blink support.
 	 * Also, D9 requires non-battery power.
 	 */
-	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", },
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
+			.default_trigger = "ide-disk", },
 	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
 	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
 			.default_trigger = "heartbeat", },
@@ -260,7 +261,6 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 	},
 	/* TODO when driver support is ready:
 	 *  - aic23 audio chip at 0x1a
-	 *  - on Mistral, 24c04 eeprom at 0x50
 	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
 	 */
 };
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
+	set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -337,11 +337,28 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 #include <linux/input.h>
+#include <linux/i2c/at24.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
 #include <mach/keypad.h>
 
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
+	{
+		/* NOTE:  powered from LCD supply */
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data	= &at24c04,
+	},
+	/* TODO when driver support is ready:
+	 *  - optionally ov9640 camera sensor at 0x30
+	 */
+};
+
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
 	KEY(0, 0, KEY_F1),		/* SW4 */
@@ -483,23 +500,30 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
+	set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
 
-	/* the sideways button (SW1) is for use as a "wakeup" button */
+	/* the sideways button (SW1) is for use as a "wakeup" button
+	 *
+	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
+	 * to the LCD 3.3V rail, which is powered down during suspend.
+	 * To allow this button to wake up the omap, work around this
+	 * HW bug by rewiring SW1 to use the main 3.3V rail.
+	 */
 	omap_cfg_reg(N15_1610_MPUIO2);
 	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
 		int ret = 0;
+		int irq = gpio_to_irq(OMAP_MPUIO(2));
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
+		set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
 		 */
-		ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
+		ret = request_irq(irq,
 				&osk_mistral_wake_interrupt,
 				IRQF_SHARED, "mistral_wakeup",
 				&osk_mistral_wake_interrupt);
@@ -508,7 +532,7 @@ static void __init osk_mistral_init(void)
 			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
 				ret);
 		} else
-			enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2)));
+			enable_irq_wake(irq);
 #endif
 	} else
 		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
@@ -520,6 +544,9 @@ static void __init osk_mistral_init(void)
 	if (gpio_request(2, "lcd_pwr") == 0)
 		gpio_direction_output(2, 1);
 
+	i2c_register_board_info(1, mistral_i2c_board_info,
+			ARRAY_SIZE(mistral_i2c_board_info));
+
 	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
 #else
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index b58043644a6..75e32d35afd 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -255,7 +255,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 {
 	int charging, batt, hi, lo, mid;
 
-	charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
+	charging = !gpio_get_value(PALMTE_DC_GPIO);
 	batt = battery[0];
 	if (charging)
 		batt -= 60;
@@ -316,7 +316,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
-	{ OMAP_TAG_MMC,		&palmte_mmc_config },
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
@@ -335,11 +334,11 @@ static void palmte_headphones_detect(void *data, int state)
 {
 	if (state) {
 		/* Headphones connected, disable speaker */
-		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
+		gpio_set_value(PALMTE_SPEAKER_GPIO, 0);
 		printk(KERN_INFO "PM: speaker off\n");
 	} else {
 		/* Headphones unplugged, re-enable speaker */
-		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
+		gpio_set_value(PALMTE_SPEAKER_GPIO, 1);
 		printk(KERN_INFO "PM: speaker on\n");
 	}
 }
@@ -347,18 +346,18 @@ static void palmte_headphones_detect(void *data, int state)
 static void __init palmte_misc_gpio_setup(void)
 {
 	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
-	if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
+	if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
 		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
 		return;
 	}
-	omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
+	gpio_direction_input(PALMTE_PINTDAV_GPIO);
 
 	/* Set USB-or-DC-IN pin as input (unused) */
-	if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
+	if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
 		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
 		return;
 	}
-	omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
+	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
 }
 
 static void __init omap_palmte_init(void)
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 40f9860a09d..5c001afe806 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -268,7 +268,7 @@ static struct platform_device *palmtt_devices[] __initdata = {
 
 static int palmtt_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(6);
+	return !gpio_get_value(6);
 }
 
 static const struct ads7846_platform_data palmtt_ts_info = {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e719294250b..cc05257eb1c 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -239,7 +239,7 @@ static struct platform_device *devices[] __initdata = {
 static int
 palmz71_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
+	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
 }
 
 static const struct ads7846_platform_data palmz71_ts_info = {
@@ -267,16 +267,6 @@ static struct omap_usb_config palmz71_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_mmc_config palmz71_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.wire4		= 0,
-		.wp_pin		= PALMZ71_MMC_WP_GPIO,
-		.power_pin	= -1,
-		.switch_pin	= PALMZ71_MMC_IN_GPIO,
-	},
-};
-
 static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
@@ -287,7 +277,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
 
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_USB,	&palmz71_usb_config},
-	{OMAP_TAG_MMC,	&palmz71_mmc_config},
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
 	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
@@ -295,13 +284,13 @@ static struct omap_board_config_kernel palmz71_config[] __initdata = {
 static irqreturn_t
 palmz71_powercable(int irq, void *dev_id)
 {
-	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
+	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
-		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+		set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
-		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+		set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
@@ -323,29 +312,28 @@ palmz71_gpio_setup(int early)
 {
 	if (early) {
 		/* Only set GPIO1 so we have a working serial */
-		omap_set_gpio_dataout(1, 1);
-		omap_set_gpio_direction(1, 0);
+		gpio_direction_output(1, 1);
 	} else {
 		/* Set MMC/SD host WP pin as input */
-		if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
+		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
 			printk(KERN_ERR "Could not reserve WP GPIO!\n");
 			return;
 		}
-		omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
 
 		/* Monitor the Power-cable-connected signal */
-		if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
+		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
 			printk(KERN_ERR
 				"Could not reserve cable signal GPIO!\n");
 			return;
 		}
-		omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
-		if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
+		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				palmz71_powercable, IRQF_SAMPLE_RANDOM,
 				"palmz71-cable", 0))
 			printk(KERN_ERR
 					"IRQ request for power cable failed!\n");
-		palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
+		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
 	}
 }
 
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index b715917bfda..3b9f907aa89 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -205,7 +205,7 @@ static struct platform_device *devices[] __initdata = {
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
 static struct omap_uart_config perseus2_uart_config __initdata = {
@@ -223,8 +223,9 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = {
 
 static void __init omap_perseus2_init(void)
 {
-	if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
-		nand_data.dev_ready = nand_dev_ready;
+	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	nand_data.dev_ready = nand_dev_ready;
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 0be4ebaa284..66a4d7d5255 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,30 +12,20 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
-static int sx1_mmc_set_power(struct device *dev, int slot, int power_on,
+static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
 	int err;
 	u8 dat = 0;
 
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
-
 	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
 	if (err < 0)
 		return err;
@@ -48,68 +38,23 @@ static int sx1_mmc_set_power(struct device *dev, int slot, int power_on,
 	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
 }
 
-static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int sx1_mmc_get_cover_state(struct device *dev, int slot)
-{
-	BUG_ON(slot != 0);
-
-	return slot_cover_open;
-}
-
-void sx1_mmc_slot_cover_handler(void *arg, int state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot_cover_open = state;
-	omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int sx1_mmc_late_init(struct device *dev)
-{
-	int ret = 0;
-
-	mmc_device = dev;
-
-	return ret;
-}
-
-static void sx1_mmc_cleanup(struct device *dev)
-{
-}
-
-static struct omap_mmc_platform_data sx1_mmc_data = {
+/* Cover switch is at OMAP_MPUIO(3) */
+static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.init                           = sx1_mmc_late_init,
-	.cleanup                        = sx1_mmc_cleanup,
 	.slots[0]       = {
-		.set_power              = sx1_mmc_set_power,
-		.set_bus_mode           = sx1_mmc_set_bus_mode,
-		.get_ro                 = NULL,
-		.get_cover_state        = sx1_mmc_get_cover_state,
+		.set_power              = mmc_set_power,
 		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
 					  MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP15XX_NR_MMC];
+
 void __init sx1_mmc_init(void)
 {
-	omap_set_mmc_info(1, &sx1_mmc_data);
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
 }
 
 #else
@@ -118,7 +63,4 @@ void __init sx1_mmc_init(void)
 {
 }
 
-void sx1_mmc_slot_cover_handler(void *arg, int state)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 130bcc6fd08..8171fe0ca08 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -378,15 +378,6 @@ static struct omap_usb_config sx1_usb_config __initdata = {
 	.pins[2]	= 0,
 };
 
-/*----------- MMC -------------------------*/
-
-static struct omap_mmc_config sx1_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled	= 1,
-		.wire4		= 0,
-	},
-};
-
 /*----------- LCD -------------------------*/
 
 static struct platform_device sx1_lcd_device = {
@@ -414,7 +405,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
 
 static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_USB,	&sx1_usb_config },
-	{ OMAP_TAG_MMC,	&sx1_mmc_config },
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
 	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
@@ -436,14 +426,9 @@ static void __init omap_sx1_init(void)
 	omap_request_gpio(1);	/* A_IRDA_OFF */
 	omap_request_gpio(11);	/* A_SWITCH */
 	omap_request_gpio(15);	/* A_USB_ON */
-	omap_set_gpio_direction(1, 0);/* gpio1 -> output */
-	omap_set_gpio_direction(11, 0);/* gpio11 -> output */
-	omap_set_gpio_direction(15, 0);/* gpio15 -> output */
-	/* set GPIO data */
-	omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */
-	omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */
-	omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */
-
+	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
+	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
+	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
 }
 /*----------------------------------------*/
 static void __init omap_sx1_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 45a01311669..c224f3c6423 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
@@ -140,21 +141,12 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_mmc_config voiceblue_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.power_pin	= 2,
-		.switch_pin	= -1,
-	},
-};
-
 static struct omap_uart_config voiceblue_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
 static struct omap_board_config_kernel voiceblue_config[] = {
 	{ OMAP_TAG_USB,  &voiceblue_usb_config },
-	{ OMAP_TAG_MMC,  &voiceblue_mmc_config },
 	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
@@ -168,29 +160,27 @@ static void __init voiceblue_init_irq(void)
 static void __init voiceblue_init(void)
 {
 	/* Watchdog */
-	omap_request_gpio(0);
+	gpio_request(0, "Watchdog");
 	/* smc91x reset */
-	omap_request_gpio(7);
-	omap_set_gpio_direction(7, 0);
-	omap_set_gpio_dataout(7, 1);
+	gpio_request(7, "SMC91x reset");
+	gpio_direction_output(7, 1);
 	udelay(2);	/* wait at least 100ns */
-	omap_set_gpio_dataout(7, 0);
+	gpio_set_value(7, 0);
 	mdelay(50);	/* 50ms until PHY ready */
 	/* smc91x interrupt pin */
-	omap_request_gpio(8);
+	gpio_request(8, "SMC91x irq");
 	/* 16C554 reset*/
-	omap_request_gpio(6);
-	omap_set_gpio_direction(6, 0);
-	omap_set_gpio_dataout(6, 0);
+	gpio_request(6, "16C554 reset");
+	gpio_direction_output(6, 0);
 	/* 16C554 interrupt pins */
-	omap_request_gpio(12);
-	omap_request_gpio(13);
-	omap_request_gpio(14);
-	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
+	gpio_request(12, "16C554 irq");
+	gpio_request(13, "16C554 irq");
+	gpio_request(14, "16C554 irq");
+	gpio_request(15, "16C554 irq");
+	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
@@ -244,19 +234,18 @@ static int wdt_gpio_state;
 
 void voiceblue_wdt_enable(void)
 {
-	omap_set_gpio_direction(0, 0);
-	omap_set_gpio_dataout(0, 0);
-	omap_set_gpio_dataout(0, 1);
-	omap_set_gpio_dataout(0, 0);
+	gpio_direction_output(0, 0);
+	gpio_set_value(0, 1);
+	gpio_set_value(0, 0);
 	wdt_gpio_state = 0;
 }
 
 void voiceblue_wdt_disable(void)
 {
-	omap_set_gpio_dataout(0, 0);
-	omap_set_gpio_dataout(0, 1);
-	omap_set_gpio_dataout(0, 0);
-	omap_set_gpio_direction(0, 1);
+	gpio_set_value(0, 0);
+	gpio_set_value(0, 1);
+	gpio_set_value(0, 0);
+	gpio_direction_input(0);
 }
 
 void voiceblue_wdt_ping(void)
@@ -265,7 +254,7 @@ void voiceblue_wdt_ping(void)
 		return;
 
 	wdt_gpio_state = !wdt_gpio_state;
-	omap_set_gpio_dataout(0, wdt_gpio_state);
+	gpio_set_value(0, wdt_gpio_state);
 }
 
 void voiceblue_reset(void)
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 5635b511ab6..c1dcdf18d8d 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -705,7 +705,6 @@ static struct clk bclk_16xx = {
 
 static struct clk mmc1_ck = {
 	.name		= "mmc_ck",
-	.id		= 1,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
@@ -720,7 +719,7 @@ static struct clk mmc1_ck = {
 
 static struct clk mmc2_ck = {
 	.name		= "mmc_ck",
-	.id		= 2,
+	.id		= 1,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index e382b438c64..77382d8b6b2 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
+#include <mach/mmc.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -99,6 +100,95 @@ static inline void omap_init_mbox(void)
 static inline void omap_init_mbox(void) { }
 #endif
 
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if (controller_nr == 0) {
+		omap_cfg_reg(MMC_CMD);
+		omap_cfg_reg(MMC_CLK);
+		omap_cfg_reg(MMC_DAT0);
+		if (cpu_is_omap1710()) {
+			omap_cfg_reg(M15_1710_MMC_CLKI);
+			omap_cfg_reg(P19_1710_MMC_CMDDIR);
+			omap_cfg_reg(P20_1710_MMC_DATDIR0);
+		}
+		if (mmc_controller->slots[0].wires == 4) {
+			omap_cfg_reg(MMC_DAT1);
+			/* NOTE: DAT2 can be on W10 (here) or M15 */
+			if (!mmc_controller->slots[0].nomux)
+				omap_cfg_reg(MMC_DAT2);
+			omap_cfg_reg(MMC_DAT3);
+		}
+	}
+
+	/* Block 2 is on newer chips, and has many pinout options */
+	if (cpu_is_omap16xx() && controller_nr == 1) {
+		if (!mmc_controller->slots[1].nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc_controller->slots[1].wires == 4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+					MOD_CONF_CTRL_1);
+	}
+}
+
+void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+			int nr_controllers)
+{
+	int i;
+
+	for (i = 0; i < nr_controllers; i++) {
+		unsigned long base, size;
+		unsigned int irq = 0;
+
+		if (!mmc_data[i])
+			continue;
+
+		omap1_mmc_mux(mmc_data[i], i);
+
+		switch (i) {
+		case 0:
+			base = OMAP1_MMC1_BASE;
+			irq = INT_MMC;
+			break;
+		case 1:
+			if (!cpu_is_omap16xx())
+				return;
+			base = OMAP1_MMC2_BASE;
+			irq = INT_1610_MMC2;
+			break;
+		default:
+			continue;
+		}
+		size = OMAP1_MMC_SIZE;
+
+		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+	};
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_OMAP_STI)
 
 #define OMAP1_STI_BASE		0xfffea000
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 04995381aa5..4f2b8a7adb1 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -177,9 +177,9 @@ void omap1510_fpga_init_irq(void)
 	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
 	 * gpio.[ch]
 	 */
-	omap_request_gpio(13);
-	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	gpio_request(13, "FPGA irq");
+	gpio_direction_input(13);
+	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 13083d7e692..89bb8756f45 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <mach/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
@@ -30,6 +31,8 @@ struct omap_id {
 	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
 };
 
+static unsigned int omap_revision;
+
 /* Register values to detect the OMAP version */
 static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
@@ -53,6 +56,12 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
 };
 
+unsigned int omap_rev(void)
+{
+	return omap_revision;
+}
+EXPORT_SYMBOL(omap_rev);
+
 /*
  * Get OMAP type from PROD_ID.
  * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
@@ -121,17 +130,18 @@ void __init omap_check_revision(void)
 	omap_id = omap_readl(OMAP32_ID_0);
 
 #ifdef DEBUG
-	printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
-	printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+	printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+	printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
 		omap_readl(OMAP_DIE_ID_1),
 	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
-	printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
-	printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n",
+		omap_readl(OMAP_PRODUCTION_ID_0));
+	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
 		omap_readl(OMAP_PRODUCTION_ID_1),
 		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
-	printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
-	printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
-	printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+	printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+	printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+	printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
 #endif
 
 	system_serial_high = omap_readl(OMAP_DIE_ID_0);
@@ -140,7 +150,7 @@ void __init omap_check_revision(void)
 	/* First check only the major version in a safe way */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
 		if (jtag_id == (omap_ids[i].jtag_id)) {
-			system_rev = omap_ids[i].type;
+			omap_revision = omap_ids[i].type;
 			break;
 		}
 	}
@@ -148,7 +158,7 @@ void __init omap_check_revision(void)
 	/* Check if we can find the die revision */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
 		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
-			system_rev = omap_ids[i].type;
+			omap_revision = omap_ids[i].type;
 			break;
 		}
 	}
@@ -158,38 +168,35 @@ void __init omap_check_revision(void)
 		if (jtag_id == omap_ids[i].jtag_id
 		    && die_rev == omap_ids[i].die_rev
 		    && omap_id == omap_ids[i].omap_id) {
-			system_rev = omap_ids[i].type;
+			omap_revision = omap_ids[i].type;
 			break;
 		}
 	}
 
 	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
-	cpu_type = system_rev >> 24;
+	cpu_type = omap_revision >> 24;
 
 	switch (cpu_type) {
 	case 0x07:
-		system_rev |= 0x07;
+		omap_revision |= 0x07;
 		break;
 	case 0x03:
 	case 0x15:
-		system_rev |= 0x15;
+		omap_revision |= 0x15;
 		break;
 	case 0x16:
 	case 0x17:
-		system_rev |= 0x16;
-		break;
-	case 0x24:
-		system_rev |= 0x24;
+		omap_revision |= 0x16;
 		break;
 	default:
-		printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+		printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
 	}
 
-	printk("OMAP%04x", system_rev >> 16);
-	if ((system_rev >> 8) & 0xff)
-		printk("%x", (system_rev >> 8) & 0xff);
-	printk(" revision %i handled as %02xxx id: %08x%08x\n",
-	       die_rev, system_rev & 0xff, system_serial_low,
+	printk(KERN_INFO "OMAP%04x", omap_revision >> 16);
+	if ((omap_revision >> 8) & 0xff)
+		printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff);
+	printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n",
+	       die_rev, omap_revision & 0xff, system_serial_low,
 	       system_serial_high);
 }
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 71fe2cc7f7c..17c9d0e0421 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -65,8 +65,8 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		/* all leds off during suspend or shutdown */
 
 		if (! machine_is_omap_perseus2()) {
-			omap_set_gpio_dataout(GPIO_TIMER, 0);
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_TIMER, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 		}
 
 		__raw_writew(~0, &fpga->leds);
@@ -94,7 +94,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2())
 			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
 		else {
-			omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
+			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
 			goto done;
 		}
 
@@ -106,7 +106,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2())
 			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			gpio_set_value(GPIO_IDLE, 1);
 			goto done;
 		}
 
@@ -116,7 +116,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2())
 			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 			goto done;
 		}
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 98e789622df..499d7ad8697 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -44,8 +44,8 @@ static void mistral_setled(void)
 		green = 1;
 	/* else both sides are disabled */
 
-	omap_set_gpio_dataout(GPIO_LED_GREEN, green);
-	omap_set_gpio_dataout(GPIO_LED_RED, red);
+	gpio_set_value(GPIO_LED_GREEN, green);
+	gpio_set_value(GPIO_LED_RED, red);
 }
 
 #endif
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 6cdad93c4a0..8cbf2562dca 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -47,14 +47,14 @@ omap_leds_init(void)
 		 * that's a different kind of LED (just one color at a time).
 		 */
 		omap_cfg_reg(P18_1610_GPIO3);
-		if (omap_request_gpio(3) == 0)
-			omap_set_gpio_direction(3, 0);
+		if (gpio_request(3, "LED red") == 0)
+			gpio_direction_output(3, 1);
 		else
 			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
 
 		omap_cfg_reg(MPUIO4);
-		if (omap_request_gpio(OMAP_MPUIO(4)) == 0)
-			omap_set_gpio_direction(OMAP_MPUIO(4), 0);
+		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
+			gpio_direction_output(OMAP_MPUIO(4), 1);
 		else
 			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
 	}
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 770d256c790..9774c1f5311 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -226,7 +226,8 @@ void omap_pm_suspend(void)
 {
 	unsigned long arg0 = 0, arg1 = 0;
 
-	printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
+	printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n",
+		omap_rev());
 
 	omap_serial_wake_trigger(1);
 
@@ -421,7 +422,8 @@ void omap_pm_suspend(void)
 
 	omap_serial_wake_trigger(0);
 
-	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
+	printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n",
+		omap_rev());
 }
 
 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 528691d5cb5..0002084e065 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -244,22 +244,22 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
 {
 	int ret;
 
-	ret = omap_request_gpio(gpio_nr);
+	ret = gpio_request(gpio_nr, "UART wake");
 	if (ret < 0) {
 		printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
 		       gpio_nr);
 		return;
 	}
-	omap_set_gpio_direction(gpio_nr, 1);
-	ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
+	gpio_direction_input(gpio_nr);
+	ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt,
 			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
 	if (ret) {
-		omap_free_gpio(gpio_nr);
+		gpio_free(gpio_nr);
 		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
 		       gpio_nr);
 		return;
 	}
-	enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr));
+	enable_irq_wake(gpio_to_irq(gpio_nr));
 }
 
 static int __init omap_serial_wakeup_init(void)