OMAP1: pass LCD config with omapfb_set_lcd_config()

LCD config for old omapfb driver is passed with OMAP_TAG_LCD from board
files or from the bootloader. In an effort to remove OMAP_TAG_LCD, this
patch adds omapfb_set_lcd_config() function that the board files can
call to set the LCD config.

This has the drawback that configuration can no longer come from the
bootloader. Of the boards supported by the kernel, this should only
affect N770 which depends on the data from the bootloader. This patch
adds an LCD config for N770 to its board files, but that is most
probably broken. Fixing this would need information about the HW setup
in N770 boards.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

13 files changed, 46 insertions, 86 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 88909cc0b25..e0e8245f3c9 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/export.h>
+#include <linux/omapfb.h>
 
 #include <media/soc_camera.h>
 
@@ -169,10 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_board_config_kernel ams_delta_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
-};
-
 static struct resource ams_delta_nand_resources[] = {
 	[0] = {
 		.start	= OMAP1_MPUIO_BASE,
@@ -302,8 +299,6 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(J19_1610_CAM_D6);
 	omap_cfg_reg(J18_1610_CAM_D7);
 
-	omap_board_config = ams_delta_config;
-	omap_board_config_size = ARRAY_SIZE(ams_delta_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
@@ -321,6 +316,8 @@ static void __init ams_delta_init(void)
 	ams_delta_init_fiq();
 
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
+
+	omapfb_set_lcd_config(&ams_delta_lcd_config);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 0b9464b4121..b00844f7414 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -290,10 +291,6 @@ static struct omap_lcd_config fsample_lcd_config = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel fsample_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&fsample_lcd_config },
-};
-
 static void __init omap_fsample_init(void)
 {
 	/* Early, board-dependent init */
@@ -352,10 +349,10 @@ static void __init omap_fsample_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	omap_board_config = fsample_config;
-	omap_board_config_size = ARRAY_SIZE(fsample_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&fsample_lcd_config);
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 00ad6b22d60..471233fe147 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -30,6 +30,7 @@
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 
@@ -391,10 +392,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&h2_lcd_config },
-};
-
 static void __init h2_init(void)
 {
 	h2_init_smc91x();
@@ -438,13 +435,13 @@ static void __init h2_init(void)
 	omap_cfg_reg(N19_1610_KBR5);
 
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
-	omap_board_config = h2_config;
-	omap_board_config_size = ARRAY_SIZE(h2_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
 	omap1_usb_init(&h2_usb_config);
 	h2_mmc_init();
+
+	omapfb_set_lcd_config(&h2_lcd_config);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4a7f2514970..7cfd25b9073 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -30,6 +30,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
+#include <linux/omapfb.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&h3_lcd_config },
-};
-
 static struct i2c_board_info __initdata h3_i2c_board_info[] = {
        {
 		I2C_BOARD_INFO("tps65013", 0x48),
@@ -426,13 +423,13 @@ static void __init h3_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	spi_register_board_info(h3_spi_board_info,
 				ARRAY_SIZE(h3_spi_board_info));
-	omap_board_config = h3_config;
-	omap_board_config_size = ARRAY_SIZE(h3_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
 	omap1_usb_init(&h3_usb_config);
 	h3_mmc_init();
+
+	omapfb_set_lcd_config(&h3_lcd_config);
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 731cc3db7ab..af2afcf24f7 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -36,6 +36,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/omapfb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -398,10 +399,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
-	{ OMAP_TAG_LCD, &htcherald_lcd_config },
-};
-
 static struct platform_device lcd_device = {
 	.name           = "lcd_htcherald",
 	.id             = -1,
@@ -580,8 +577,6 @@ static void __init htcherald_init(void)
 	printk(KERN_INFO "HTC Herald init.\n");
 
 	/* Do board initialization before we register all the devices */
-	omap_board_config = htcherald_config;
-	omap_board_config_size = ARRAY_SIZE(htcherald_config);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	htcherald_disable_watchdog();
@@ -598,6 +593,8 @@ static void __init htcherald_init(void)
 	htc_mmc_data[0] = &htc_mmc1_data;
 	omap1_init_mmc(htc_mmc_data, 1);
 #endif
+
+	omapfb_set_lcd_config(&htcherald_lcd_config);
 }
 
 MACHINE_START(HERALD, "HTC Herald")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 309369ea697..1d5ab6606b9 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -370,10 +371,6 @@ static inline void innovator_mmc_init(void)
 }
 #endif
 
-static struct omap_board_config_kernel innovator_config[] = {
-	{ OMAP_TAG_LCD,		NULL },
-};
-
 static void __init innovator_init(void)
 {
 	if (cpu_is_omap1510())
@@ -416,17 +413,15 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		omapfb_set_lcd_config(&innovator1510_lcd_config);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		omapfb_set_lcd_config(&innovator1610_lcd_config);
 	}
 #endif
-	omap_board_config = innovator_config;
-	omap_board_config_size = ARRAY_SIZE(innovator_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	innovator_mmc_init();
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7155d8ce516..9b6332a31fb 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -98,15 +98,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
 	.shutdown = mipid_shutdown,
 };
 
+static struct omap_lcd_config nokia770_lcd_config __initdata = {
+	.ctrl_name	= "hwa742",
+};
+
 static void __init mipid_dev_init(void)
 {
-	const struct omap_lcd_config *conf;
+	nokia770_mipid_platform_data.nreset_gpio = 13;
+	nokia770_mipid_platform_data.data_lines = 16;
 
-	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
-	if (conf != NULL) {
-		nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
-		nokia770_mipid_platform_data.data_lines = conf->data_lines;
-	}
+	omapfb_set_lcd_config(&nokia770_lcd_config);
 }
 
 static void __init ads7846_dev_init(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 675de06557a..ef874655fbd 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -34,6 +34,7 @@
 #include <linux/i2c.h>
 #include <linux/leds.h>
 #include <linux/smc91x.h>
+#include <linux/omapfb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -300,12 +301,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 };
 #endif
 
-static struct omap_board_config_kernel osk_config[] __initdata = {
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-	{ OMAP_TAG_LCD,			&osk_lcd_config },
-#endif
-};
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 #include <linux/input.h>
@@ -549,8 +544,6 @@ static void __init osk_init(void)
 	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
 	osk_flash_resource.end += SZ_32M - 1;
 	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
-	omap_board_config = osk_config;
-	omap_board_config_size = ARRAY_SIZE(osk_config);
 
 	l = omap_readl(USB_TRANSCEIVER_CTRL);
 	l |= (3 << 1);
@@ -567,6 +560,11 @@ static void __init osk_init(void)
 	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
 			      ARRAY_SIZE(osk_i2c_board_info));
 	osk_mistral_init();
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+	omapfb_set_lcd_config(&osk_lcd_config);
+#endif
+
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 81fa27f8836..612342cb2a2 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,6 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -209,10 +210,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel palmte_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&palmte_lcd_config },
-};
-
 static struct spi_board_info palmte_spi_info[] __initdata = {
 	{
 		.modalias	= "tsc2102",
@@ -250,9 +247,6 @@ static void __init omap_palmte_init(void)
 	omap_cfg_reg(UART3_TX);
 	omap_cfg_reg(UART3_RX);
 
-	omap_board_config = palmte_config;
-	omap_board_config_size = ARRAY_SIZE(palmte_config);
-
 	platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
@@ -260,6 +254,8 @@ static void __init omap_palmte_init(void)
 	omap_serial_init();
 	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&palmte_lcd_config);
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 81cb8217838..b63350bc88f 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -273,10 +274,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel palmtt_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
-};
-
 static void __init omap_mpu_wdt_mode(int mode) {
 	if (mode)
 		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
@@ -298,15 +295,14 @@ static void __init omap_palmtt_init(void)
 
 	omap_mpu_wdt_mode(0);
 
-	omap_board_config = palmtt_config;
-	omap_board_config_size = ARRAY_SIZE(palmtt_config);
-
 	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
 	omap1_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&palmtt_lcd_config);
 }
 
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e881945ce8e..9924c70af09 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -239,10 +240,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
 
-static struct omap_board_config_kernel palmz71_config[] __initdata = {
-	{OMAP_TAG_LCD,	&palmz71_lcd_config},
-};
-
 static irqreturn_t
 palmz71_powercable(int irq, void *dev_id)
 {
@@ -313,9 +310,6 @@ omap_palmz71_init(void)
 	palmz71_gpio_setup(1);
 	omap_mpu_wdt_mode(0);
 
-	omap_board_config = palmz71_config;
-	omap_board_config_size = ARRAY_SIZE(palmz71_config);
-
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	spi_register_board_info(palmz71_boardinfo,
@@ -324,6 +318,8 @@ omap_palmz71_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);
+
+	omapfb_set_lcd_config(&palmz71_lcd_config);
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index c000bed7627..44df9317265 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -249,10 +250,6 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel perseus2_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
-};
-
 static void __init perseus2_init_smc91x(void)
 {
 	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
@@ -320,10 +317,10 @@ static void __init omap_perseus2_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	omap_board_config = perseus2_config;
-	omap_board_config_size = ARRAY_SIZE(perseus2_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&perseus2_lcd_config);
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 7bcd82ab0fd..0c880be1127 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -27,6 +27,7 @@
 #include <linux/i2c.h>
 #include <linux/errno.h>
 #include <linux/export.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -371,11 +372,6 @@ static struct platform_device *sx1_devices[] __initdata = {
 	&sx1_lcd_device,
 	&sx1_irda_device,
 };
-/*-----------------------------------------*/
-
-static struct omap_board_config_kernel sx1_config[] __initdata = {
-	{ OMAP_TAG_LCD,	&sx1_lcd_config },
-};
 
 /*-----------------------------------------*/
 
@@ -391,8 +387,6 @@ static void __init omap_sx1_init(void)
 
 	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
 
-	omap_board_config = sx1_config;
-	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap1_usb_init(&sx1_usb_config);
@@ -406,6 +400,8 @@ static void __init omap_sx1_init(void)
 	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
 	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
 	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
+
+	omapfb_set_lcd_config(&sx1_lcd_config);
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")