ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap

There's no need to have this file in plat/fpga.h. We can
make it local to plat-omap replacing fpga_read/write
functions directly with readb/writeb as that's how
they are already defined in fpga.h.

Note that 2420 based H4 is also using the fpga, so let's
keep the led support around in plat-omap until we flip
over mach-omap2 to device tree.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

7 files changed, 135 insertions, 20 deletions

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70c47a..6f496df3d18 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -30,7 +30,7 @@
 #include <plat/tc.h>
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
 
 static void __init fsample_init_smc91x(void)
 {
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 		   H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
 }
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 411cc5b14ce..c2317c9f615 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,7 +33,7 @@
 
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <plat/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -215,7 +215,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 
 static int innovator_get_pendown_state(void)
 {
-	return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
 }
 
 static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +279,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
 static void __init innovator_init_smc91x(void)
 {
 	if (cpu_is_omap1510()) {
-		fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
 			   OMAP1510_FPGA_RST);
 		udelay(750);
 	} else {
@@ -335,10 +335,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
 	if (power_on)
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
 				OMAP1510_FPGA_POWER);
 	else
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
 				OMAP1510_FPGA_POWER);
 
 	return 0;
@@ -390,14 +390,14 @@ static void __init innovator_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
 		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
 		udelay(10);
 
-		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
 		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
 		udelay(10);
 
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +437,7 @@ static void __init innovator_init(void)
  */
 static void __init innovator_map_io(void)
 {
+#ifdef CONFIG_ARCH_OMAP15XX
 	omap15xx_map_io();
 
 	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +445,10 @@ static void __init innovator_map_io(void)
 
 	/* Dump the Innovator FPGA rev early - useful info for support. */
 	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			fpga_read(OMAP1510_FPGA_REV_HIGH),
-			fpga_read(OMAP1510_FPGA_REV_LOW),
-			fpga_read(OMAP1510_FPGA_BOARD_REV));
+			__raw_readb(OMAP1510_FPGA_REV_HIGH),
+			__raw_readb(OMAP1510_FPGA_REV_LOW),
+			__raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b05417bf..a1cdeeb43f4 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -30,7 +30,7 @@
 
 #include <plat/tc.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>
@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 
 static void __init perseus2_init_smc91x(void)
 {
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 		   H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
 }
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b24f9f..a65f50aeda6 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -38,6 +38,7 @@ static inline void omap7xx_map_io(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
 static inline void omap15xx_map_io(void)
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50fc688..4ec220d8da5 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6137c..3d235244bf5 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
 
 #define OMAP1510_DSP_MMU_BASE	(0xfffed200)
 
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
+#define OMAP1510_FPGA_SIZE		SZ_4K
+#define OMAP1510_FPGA_START		0x08000000		/* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
+
 #endif /*  __ASM_ARCH_OMAP15XX_H */
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834af83..d1ac08016f0 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/mux.h>
-#include <plat/fpga.h>
 
 #include "pm.h"