diff options
| author | Tony Lindgren <tony@atomide.com> | 2013-05-30 12:53:05 -0700 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2013-05-30 13:09:31 -0700 |
| commit | 76787b3bd2550613ab688842b231e8f82c451cee (patch) | |
| tree | 7f8b343fce31efe68acf01c67c05a1653ab69f2b /arch/arm/mach-omap2/Makefile | |
| parent | 26f45c29e3c18c6f41a6bf64c791a5dcbd239683 (diff) | |
ARM: OMAP2+: Remove board-4430sdp.c
We can now boot with device tree. If you don't want to update u-boot,
you can boot with appended DTB with the following instructions:
1. Make sure you have the appended DTB support in .config
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
2. Build the zImage
$ ARCH=arm CROSS_COMPILE=... make zImage
3. Build the device tree blobs
$ ARCH=arm CROSS_COMPILE=... make dtbs
4. Append the dtb to zImage
$ cat arch/arm/boot/zImage arch/arm/boot/dts/omap4-sdp.dtb > /tmp/appended
5. Use mkimage to produce the appended device tree uImage
$ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
-n "Linux" -d /tmp/appended /tmp/uImage
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/Makefile')
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 55a9d677768..875d61d7173 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -251,7 +251,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o -obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o |