Merge commit 'v2.6.35' into kbuild/kbuild

Conflicts:
	arch/powerpc/Makefile

1 files changed, 383 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index b4e6eca0e8a..af383a87694 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -20,18 +20,341 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
+#include <linux/davinci_emac.h>
 
 #include <mach/hardware.h>
+#include <mach/am35xx.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/control.h>
 #include <plat/usb.h>
+#include <plat/display.h>
 
 #include "mux.h"
 
+#define AM35XX_EVM_PHY_MASK		(0xF)
+#define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
+
+static struct emac_platform_data am3517_evm_emac_pdata = {
+	.phy_mask	= AM35XX_EVM_PHY_MASK,
+	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
+	.rmii_en	= 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+	{
+		.start  = AM35XX_IPSS_EMAC_BASE,
+		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_emac_device = {
+	.name		= "davinci_emac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_emac_resources),
+	.resource	= am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+		AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+{
+	unsigned int regval;
+
+	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
+	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
+	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
+	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
+	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
+	pdata->version			= EMAC_VERSION_2;
+	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
+	pdata->interrupt_enable		= am3517_enable_ethernet_int;
+	pdata->interrupt_disable	= am3517_disable_ethernet_int;
+	am3517_emac_device.dev.platform_data	= pdata;
+	platform_device_register(&am3517_emac_device);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	return ;
+}
+
+
+
+#define LCD_PANEL_PWR		176
+#define LCD_PANEL_BKLIGHT_PWR	182
+#define LCD_PANEL_PWM		181
+
+static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("s35390a", 0x30),
+		.type		= "s35390a",
+	},
+};
+
+/*
+ * RTC - S35390A
+ */
+#define GPIO_RTCS35390A_IRQ	55
+
+static void __init am3517_evm_rtc_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
+	r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+	if (r < 0) {
+		printk(KERN_WARNING "failed to request GPIO#%d\n",
+				GPIO_RTCS35390A_IRQ);
+		return;
+	}
+	r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
+	if (r < 0) {
+		printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
+				GPIO_RTCS35390A_IRQ);
+		gpio_free(GPIO_RTCS35390A_IRQ);
+		return;
+	}
+	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+}
+
+/*
+ * I2C GPIO Expander - TCA6416
+ */
+
+/* Mounted on Base-Board */
+static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+};
+static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &am3517evm_gpio_expander_info_0,
+	},
+};
+
+/* Mounted on UI Card */
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES + 16,
+};
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
+};
+static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tca6416", 0x20),
+		.platform_data = &am3517evm_ui_gpio_expander_info_1,
+	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &am3517evm_ui_gpio_expander_info_2,
+	},
+};
+
+static int __init am3517_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
+	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c3_boardinfo));
+
+	return 0;
+}
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+static void __init am3517_evm_display_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
+	/*
+	 * Enable GPIO 182 = LCD Backlight Power
+	 */
+	r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
+		return;
+	}
+	gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
+	/*
+	 * Enable GPIO 181 = LCD Panel PWM
+	 */
+	r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_pwm\n");
+		goto err_1;
+	}
+	gpio_direction_output(LCD_PANEL_PWM, 1);
+	/*
+	 * Enable GPIO 176 = LCD Panel Power enable pin
+	 */
+	r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_pwr\n");
+		goto err_2;
+	}
+	gpio_direction_output(LCD_PANEL_PWR, 1);
+
+	printk(KERN_INFO "Display initialized successfully\n");
+	return;
+
+err_2:
+	gpio_free(LCD_PANEL_PWM);
+err_1:
+	gpio_free(LCD_PANEL_BKLIGHT_PWR);
+}
+#else
+static void __init am3517_evm_display_init(void) {}
+#endif
+
+static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(LCD_PANEL_PWR, 1);
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(LCD_PANEL_PWR, 0);
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "sharp_lq_panel",
+	.phy.dpi.data_lines 	= 16,
+	.platform_enable	= am3517_evm_panel_enable_lcd,
+	.platform_disable	= am3517_evm_panel_disable_lcd,
+};
+
+static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device am3517_evm_tv_device = {
+	.type 			= OMAP_DISPLAY_TYPE_VENC,
+	.name 			= "tv",
+	.driver_name		= "venc",
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= am3517_evm_panel_enable_tv,
+	.platform_disable	= am3517_evm_panel_disable_tv,
+};
+
+static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= am3517_evm_panel_enable_dvi,
+	.platform_disable	= am3517_evm_panel_disable_dvi,
+};
+
+static struct omap_dss_device *am3517_evm_dss_devices[] = {
+	&am3517_evm_lcd_device,
+	&am3517_evm_tv_device,
+	&am3517_evm_dvi_device,
+};
+
+static struct omap_dss_board_info am3517_evm_dss_data = {
+	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
+	.devices	= am3517_evm_dss_devices,
+	.default_device	= &am3517_evm_lcd_device,
+};
+
+struct platform_device am3517_evm_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &am3517_evm_dss_data,
+	},
+};
+
 /*
  * Board initialization
  */
@@ -39,6 +362,7 @@ static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
 };
 
 static struct platform_device *am3517_evm_devices[] __initdata = {
+	&am3517_evm_dss_device,
 };
 
 static void __init am3517_evm_init_irq(void)
@@ -51,9 +375,14 @@ static void __init am3517_evm_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+#else
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+#endif
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
@@ -70,20 +399,72 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+
+static struct resource am3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
+	.resource	= am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+	am3517_hecc_device.dev.platform_data = pdata;
+	platform_device_register(&am3517_hecc_device);
+}
+
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	am3517_evm_i2c_init();
 	platform_add_devices(am3517_evm_devices,
 				ARRAY_SIZE(am3517_evm_devices));
 
 	omap_serial_init();
+
+	/* Configure GPIO for EHCI port */
+	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);
+	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
+	/* DSS */
+	am3517_evm_display_init();
+
+	/* RTC - S35390A */
+	am3517_evm_rtc_init();
+
+	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
+				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
+	/*Ethernet*/
+	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
 static void __init am3517_evm_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")