OMAP2/3 board-*.c files: read bootloader configuration earlier

Most board-*.c files read configuration data from the bootloader in
their .init_machine() function.  This needs to happen earlier, at some
point before omap2_init_common_hw() is called.  This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 615f21d1eb2..7a2b54c7291 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -248,14 +248,6 @@ out:
 	clk_put(gpmc_fck);
 }
 
-static void __init omap_apollon_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
-}
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -271,6 +263,16 @@ static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
+static void __init omap_apollon_init_irq(void)
+{
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
@@ -319,8 +321,6 @@ static void __init omap_apollon_init(void)
 	 * if not needed.
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap_serial_init();
 }