Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
  [media] rc: update for bitop name changes
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  lib, arch: add filter argument to show_mem and fix private implementations
  SLUB: Write to per cpu data when allocating it
  slub: Fix debugobjects with lockless fastpath
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
  ...

NOTE!

This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.

To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.

In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.

1 files changed, 41 insertions, 38 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 00bb1fc5e01..65f9fde2c56 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
 	if (gpio_is_valid(dssdev->reset_gpio))
 		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
@@ -143,7 +140,7 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 }
 
 static struct regulator_consumer_supply devkit8000_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
 
 
 /* ads7846 on SPI */
@@ -198,16 +195,8 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 	.default_device = &devkit8000_lcd_device,
 };
 
-static struct platform_device devkit8000_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &devkit8000_dss_data,
-	},
-};
-
 static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -247,6 +236,8 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret;
+
 	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +246,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + 1;
-	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+	if (ret < 0) {
+		devkit8000_lcd_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+	}
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
 	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+	if (ret < 0) {
+		devkit8000_dvi_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+	}
 
 	return 0;
 }
@@ -275,14 +272,15 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll1_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -323,8 +321,8 @@ static struct regulator_init_data devkit8000_vpll1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vpll1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll1_supplies),
+	.consumer_supplies	= devkit8000_vpll1_supplies,
 };
 
 /* VAUX4 for ads7846 and nubs */
@@ -346,9 +344,7 @@ static struct twl4030_usb_data devkit8000_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_codec_audio_data devkit8000_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data devkit8000_audio_data;
 
 static struct twl4030_codec_data devkit8000_codec_data = {
 	.audio_mclk = 26000000,
@@ -452,11 +448,15 @@ static struct platform_device keys_gpio = {
 };
 
 
-static void __init devkit8000_init_irq(void)
+static void __init devkit8000_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init devkit8000_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -571,7 +571,6 @@ static void __init omap_dm9000_init(void)
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
-	&devkit8000_dss_device,
 	&leds_gpio,
 	&keys_gpio,
 	&omap_dm9000_dev,
@@ -616,11 +615,11 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -628,6 +627,7 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for Devkit8000 ethernet */
 	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
@@ -781,6 +781,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static void __init devkit8000_init(void)
 {
@@ -793,13 +794,14 @@ static void __init devkit8000_init(void)
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
 
+	omap_display_init(&devkit8000_dss_data);
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
 
 	devkit8000_ads7846_init();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	devkit8000_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
@@ -809,8 +811,9 @@ static void __init devkit8000_init(void)
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= devkit8000_init_early,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,