Merge branch 'origin' into devel-stable

Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c

1 files changed, 278 insertions, 7 deletions

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 117b8fd7e3a..9958987a3d0 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
@@ -28,9 +29,12 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/onenand.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -38,6 +42,108 @@
 #define IGEP2_GPIO_LED0_RED 	26
 #define IGEP2_GPIO_LED0_GREEN 	27
 #define IGEP2_GPIO_LED1_RED   	28
+#define IGEP2_GPIO_DVI_PUP	170
+#define IGEP2_GPIO_WIFI_NPD 	94
+#define IGEP2_GPIO_WIFI_NRESET 	95
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+#define ONENAND_MAP             0x20000000
+
+/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep2_onenand_partitions[] = {
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 2 * (64*(2*2048))
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 6 * (64*(2*2048)),
+	},
+	{
+		.name           = "Environment",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2 * (64*(2*2048)),
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 12 * (64*(2*2048)),
+	},
+	{
+		.name           = "File System",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
+{
+       /* nothing is required to be setup for onenand as of now */
+       return 0;
+}
+
+static struct omap_onenand_platform_data igep2_onenand_data = {
+	.parts = igep2_onenand_partitions,
+	.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
+	.onenand_setup = igep2_onenand_setup,
+	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep2_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+	.dev = {
+		.platform_data = &igep2_onenand_data,
+	},
+};
+
+void __init igep2_flash_init(void)
+{
+	u8		cs = 0;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		/* Check if NAND/oneNAND is configured */
+		if ((ret & 0xC00) == 0x800)
+			/* NAND found */
+			pr_err("IGEP v2: Unsupported NAND found\n");
+		else {
+			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+				/* ONENAND found */
+				onenandcs = cs;
+		}
+		cs++;
+	}
+	if (onenandcs > GPMC_CS_NUM) {
+		pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+		return;
+	}
+
+	if (onenandcs < GPMC_CS_NUM) {
+		igep2_onenand_data.cs = onenandcs;
+		if (platform_device_register(&igep2_onenand_device) < 0)
+			pr_err("IGEP v2: Unable to register OneNAND device\n");
+	}
+}
+
+#else
+void __init igep2_flash_init(void) {}
+#endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
@@ -106,6 +212,10 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = {
 	.supply		= "vmmc",
 };
 
+static struct regulator_consumer_supply igep2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
 	.constraints = {
@@ -121,7 +231,22 @@ static struct regulator_init_data igep2_vmmc1 = {
 	.consumer_supplies      = &igep2_vmmc1_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
+static struct regulator_init_data igep2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vmmc2_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -142,12 +267,13 @@ static int igep2_twl_gpio_setup(struct device *dev,
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
 	*/
 	igep2_vmmc1_supply.dev = mmc[0].dev;
+	igep2_vmmc2_supply.dev = mmc[1].dev;
 
 	return 0;
 };
@@ -164,23 +290,130 @@ static struct twl4030_usb_data igep2_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static int igep2_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
+
+	return 0;
+}
+
+static void igep2_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
+}
+
+static struct omap_dss_device igep2_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= igep2_enable_dvi,
+	.platform_disable	= igep2_disable_dvi,
+};
+
+static struct omap_dss_device *igep2_dss_devices[] = {
+	&igep2_dvi_device
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
+	.devices	= igep2_dss_devices,
+	.default_device	= &igep2_dvi_device,
+};
+
+static struct platform_device igep2_dss_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &igep2_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply igep2_vpll2_supply = {
+	.supply	= "vdds_dsi",
+	.dev	= &igep2_dss_device.dev,
+};
+
+static struct regulator_init_data igep2_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &igep2_vpll2_supply,
+};
+
+static void __init igep2_display_init(void)
+{
+	if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") &&
+	    gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
+		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
+}
+#ifdef CONFIG_LEDS_TRIGGERS
+static struct gpio_led gpio_leds[] = {
+	{
+		.name = "GPIO_LED1_RED",
+		.default_trigger = "heartbeat",
+		.gpio = IGEP2_GPIO_LED1_RED,
+	},
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+	.leds           = gpio_leds,
+	.num_leds       = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data  =  &gpio_leds_info,
+	},
+};
+#endif
+
+static struct platform_device *igep2_devices[] __initdata = {
+	&igep2_dss_device,
+#ifdef CONFIG_LEDS_TRIGGERS
+	&leds_gpio,
+#endif
+};
+
 static void __init igep2_init_irq(void)
 {
 	omap_board_config = igep2_config;
 	omap_board_config_size = ARRAY_SIZE(igep2_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
+static struct twl4030_codec_audio_data igep2_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data igep2_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &igep2_audio_data,
+};
+
 static struct twl4030_platform_data igep2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.usb		= &igep2_usb_data,
+	.codec		= &igep2_codec_data,
 	.gpio		= &igep2_gpio_data,
 	.vmmc1          = &igep2_vmmc1,
+	.vmmc2		= &igep2_vmmc2,
+	.vpll2		= &igep2_vpll2,
 
 };
 
@@ -203,6 +436,23 @@ static int __init igep2_i2c_init(void)
 	return 0;
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset = true,
+	.reset_gpio_port[0] = -EINVAL,
+	.reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+	.reset_gpio_port[2] = -EINVAL,
+};
+
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -215,9 +465,13 @@ static void __init igep2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	igep2_i2c_init();
+	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
 
+	igep2_flash_init();
+	igep2_display_init();
 	igep2_init_smsc911x();
 
 	/* GPIO userspace leds */
@@ -234,19 +488,36 @@ static void __init igep2_init(void)
 		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
+#ifndef CONFIG_LEDS_TRIGGERS
 	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+#endif
+	/* GPIO W-LAN + Bluetooth combo module */
+	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_WIFI_NPD, 0);
+/* 		gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+	if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
+		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
+		udelay(10);
+		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
 }
 
 static void __init igep2_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")