Merge tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree related changes for omaps.

Note that this branch is based on omap-cleanup-sparseirq-for-v3.7
to avoid merge conflicts with the sparseirq changes for gpio-twl4030
driver.

* tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Mux uart pins for omap4-sdp
  ARM: OMAP2+: select PINCTRL in Kconfig
  arm/dts: Add pinctrl driver entries for omap2/3/4
  arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
  ARM: dts: omap3-overo: Add support for the blue LED
  Documentation: dt: Update the OMAP documentation with Overo/Toby
  ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
  ARM: dts: OMAP4: Add reg and interrupts for every nodes
  ARM: dts: AM33XX: Specify reg and interrupt property for all nodes
  ARM: dts: AM33XX: Convert all hex numbers to lower-case
  ARM: dts: omap3-beagle: Enable audio support
  ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file
  ARM: dts: omap5: Add McBSP entries
  ARM: dts: omap4: Add reg-names for McPDM and DMIC
  ARM: dts: omap4: Add McBSP entries
  ARM: dts: omap3: Add McBSP entries
  ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
  ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
  ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support
  ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
  ...

1 files changed, 12 insertions, 11 deletions

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0d362e9f9cb..b94873d0c6b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -40,12 +40,10 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include "common.h"
@@ -75,6 +73,18 @@
 #define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
 #define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
 
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
+
 static u8 omap3_evm_version;
 
 u8 get_omap3_evm_rev(void)
@@ -377,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };
@@ -526,9 +533,6 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -688,9 +692,6 @@ static void __init omap3_evm_init(void)
 	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
 	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
 
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);