omap3: zoom: split board file for software reuse

Split zoom2 board file into a base board file and a board-zoom-peripherals.c
file. That way the same peripherals file can be reused for zoom3 and sdp3630
in addition to zoom2.

Also remove unused struct omap_board_config_kernel entry.

NOTE: Keep the twl4030_madc_platform_data and twl4030_platform_data
entries in board-zoom2.c to avoid merge conflicts with the pending
patches in MFD tree. These entries will be removed later as a fix.

Following list shows the commonality across the three platforms and hence the
case for software reuse:

Peripheral    zoom2    zoom3  sdp3630
---------------------------------------
Ethernet        smsc    smsc    smc
NOR             n/a     n/a     B
Onenand         n/a     n/a     B
HDMI            A       A       B (present on different i2c)
NAND            A       A       A (same nand)
SDRAM           A       A       A (same sdram)
Keypad          A       A       A (same twl)
Camera          A       A       A (same sensor can be mounted)
LCD Display     A       A       A (same wvga display)
OPPs            A       A       A (same chip feature)
Audio           A       A       A (same audio via twl5030)

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 6 insertions, 225 deletions

diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 67abebc46fe..31d485b6859 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,232 +13,31 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/common.h>
-#include <plat/usb.h>
+#include <plat/board.h>
 
-#include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-/* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_ENTER),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_SELECT),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 5, KEY_RIGHT),
-	KEY(7, 6, KEY_UP),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
-	.supply		= "vmmc",
-};
-
-static struct regulator_consumer_supply zoom2_vsim_supply = {
-	.supply		= "vmmc_aux",
-};
-
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
-	.supply		= "vmmc",
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vsim_supply,
-};
-
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{}      /* Terminator */
-};
-
-static int zoom2_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(mmc);
-
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom2_vmmc1_supply.dev = mmc[0].dev;
-	zoom2_vsim_supply.dev = mmc[0].dev;
-	zoom2_vmmc2_supply.dev = mmc[1].dev;
-
-	return 0;
-}
-
-
-static int zoom2_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom2_bci_data = {
-	.battery_tmp_tbl	= zoom2_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
-};
-
-static struct twl4030_usb_data zoom2_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static void __init omap_zoom2_init_irq(void)
 {
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 				 mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= zoom2_twl_gpio_setup,
-};
+/* REVISIT: These audio entries can be removed once MFD code is merged */
+#if 0
 
 static struct twl4030_madc_platform_data zoom2_madc_data = {
 	.irq_line	= 1,
 };
 
-static struct twl4030_codec_audio_data zoom2_audio_data = {
-	.audio_mclk = 26000000,
-};
-
-static struct twl4030_codec_data zoom2_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &zoom2_audio_data,
-};
-
 static struct twl4030_platform_data zoom2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -249,39 +48,21 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
 	.keypad		= &zoom2_kp_twl4030_data,
-	.codec		= &zoom2_codec_data,
 	.vmmc1          = &zoom2_vmmc1,
 	.vmmc2          = &zoom2_vmmc2,
 	.vsim           = &zoom2_vsim,
 
 };
 
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl4030", 0x48),
-		.flags		= I2C_CLIENT_WAKE,
-		.irq		= INT_34XX_SYS_NIRQ,
-		.platform_data	= &zoom2_twldata,
-	},
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
-			ARRAY_SIZE(zoom2_i2c_boardinfo));
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
+#endif
 
 extern int __init omap_zoom2_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);
 
 static void __init omap_zoom2_init(void)
 {
-	omap_i2c_init();
-	omap_serial_init();
+	zoom_peripherals_init();
 	omap_zoom2_debugboard_init();
-	usb_musb_init();
 }
 
 static void __init omap_zoom2_map_io(void)