Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits)
  omap: mailbox: reorganize headers
  omap: mailbox: standarize on 'omap-mailbox'
  omap: mailbox: only compile for configured archs
  omap: mailbox: simplify omap_mbox_register()
  omap: mailbox: reorganize registering
  omap: mailbox: add IRQ names
  omap: mailbox: remove unecessary fields
  omap: mailbox: don't export unecessary symbols
  omap: mailbox: update omap1 probing
  omap: mailbox: use correct config for omap1
  omap: mailbox: 2420 should be detected at run-time
  omap: mailbox: reorganize structures
  omap: mailbox: trivial cleanups
  omap mailbox: Set a device in logical mbox instance for traceability
  omap: mailbox: convert block api to kfifo
  omap: mailbox: remove (un)likely macros from cold paths
  omap: mailbox cleanup: split MODULE_AUTHOR line
  omap: mailbox: convert rwlocks to spinlock
  Mailbox: disable mailbox interrupt when request queue
  Mailbox: new mutext lock for h/w mailbox configuration
  ...

1 files changed, 57 insertions, 7 deletions

diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 5b605eba3e7..6ca0b834161 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -25,15 +25,50 @@
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
-static void __init omap_zoom_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel zoom_config[] __initdata = {
 };
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom_init_irq(void)
 {
 	omap_board_config = zoom_config;
@@ -46,6 +81,19 @@ static void __init omap_zoom_init_irq(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -66,6 +114,8 @@ static void __init omap_zoom_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			 ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 
 	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
@@ -76,7 +126,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,