Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits)
  [ARM] 5308/1: Fix Viper ISA IRQ handling
  [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error
  [ARM] 5306/1: pxa: fix build error on CM-X270
  [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
  [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
  [ARM] 5301/1: ARM: OMAP: Add missing irq defines
  ARM: OMAP3: Add default kernel config for OMAP LDP
  ARM: OMAP3: Add basic board support for OMAP LDP
  ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add Beagle defconfig
  ARM: OMAP3: Add minimal Beagle board support
  ARM: OMAP3: Add minimal omap3430 support
  ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  ARM: OMAP: Fixes to omap_mcbsp_request function
  ARM: OMAP: Add support for OMAP2430 in McBSP
  ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
  ARM: OMAP: Allocate McBSP devices dynamically
  Fix sections for omap-mcbsp platform driver
  [ARM] S3C24XX: Additional include moves
  ...

1 files changed, 20 insertions, 11 deletions

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index e5b475f2108..084e11082f8 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk)
 static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	dd = clk->dpll_data;
 
-	cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
-			dd->control_reg);
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	__raw_writel(v, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	state <<= dd->idlest_bit;
 	idlest_mask = 1 << dd->idlest_bit;
 
-	while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+	while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
@@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
 
 	dd = clk->dpll_data;
 
-	v = cm_read_reg(dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
 static void omap3_dpll_allow_idle(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	if (!clk || !clk->dpll_data)
 		return;
@@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	cm_rmw_reg_bits(dd->autoidle_mask,
-			DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
-			dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
 }
 
 /**
@@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk)
 static void omap3_dpll_deny_idle(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	if (!clk || !clk->dpll_data)
 		return;
 
 	dd = clk->dpll_data;
 
-	cm_rmw_reg_bits(dd->autoidle_mask,
-			DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
-			dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
 }
 
 /* Clock control for DPLL outputs */
@@ -482,8 +489,10 @@ int __init omap2_clk_init(void)
 	for (clkp = onchip_34xx_clks;
 	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
 	     clkp++) {
-		if ((*clkp)->flags & cpu_clkflg)
+		if ((*clkp)->flags & cpu_clkflg) {
 			clk_register(*clkp);
+			omap2_init_clk_clkdm(*clkp);
+		}
 	}
 
 	/* REVISIT: Not yet ready for OMAP3 */