summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/clock34xx.c
diff options
context:
space:
mode:
authorPaul Walmsley <paul@pwsan.com>2008-08-19 11:08:40 +0300
committerTony Lindgren <tony@atomide.com>2008-08-19 11:08:40 +0300
commitad67ef6848a1608b0430003e11e7af1ce706e341 (patch)
treef55151e3cc4b4739f13a074af6e7f43e7e6be2d1 /arch/arm/mach-omap2/clock34xx.c
parent1fca25427482387689fa27594c992a961d98768f (diff)
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code
This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/clock34xx.c')
-rw-r--r--arch/arm/mach-omap2/clock34xx.c27
1 files changed, 17 insertions, 10 deletions
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 3ff74952f83..dff7a72fefc 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk)
static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
{
const struct dpll_data *dd;
+ u32 v;
dd = clk->dpll_data;
- cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
- dd->control_reg);
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ __raw_writel(v, dd->control_reg);
}
/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
state <<= dd->idlest_bit;
idlest_mask = 1 << dd->idlest_bit;
- while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+ while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
i < MAX_DPLL_WAIT_TRIES) {
i++;
udelay(1);
@@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
dd = clk->dpll_data;
- v = cm_read_reg(dd->autoidle_reg);
+ v = __raw_readl(dd->autoidle_reg);
v &= dd->autoidle_mask;
v >>= __ffs(dd->autoidle_mask);
@@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
static void omap3_dpll_allow_idle(struct clk *clk)
{
const struct dpll_data *dd;
+ u32 v;
if (!clk || !clk->dpll_data)
return;
@@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk)
* by writing 0x5 instead of 0x1. Add some mechanism to
* optionally enter this mode.
*/
- cm_rmw_reg_bits(dd->autoidle_mask,
- DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
- dd->autoidle_reg);
+ v = __raw_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ __raw_writel(v, dd->autoidle_reg);
}
/**
@@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk)
static void omap3_dpll_deny_idle(struct clk *clk)
{
const struct dpll_data *dd;
+ u32 v;
if (!clk || !clk->dpll_data)
return;
dd = clk->dpll_data;
- cm_rmw_reg_bits(dd->autoidle_mask,
- DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
- dd->autoidle_reg);
+ v = __raw_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ __raw_writel(v, dd->autoidle_reg);
}
/* Clock control for DPLL outputs */