ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions

Convert the OMAP clock code's _omap2_module_wait_ready() to use
SoC-independent CM functions that are provided by the CM code, rather
than using a deprecated function from mach-omap2/prcm.c.

This facilitates the future conversion of the CM code to a driver, and
also removes a mach-omap2/prcm.c user.  mach-omap2/prcm.c will be removed
by a subsequent patch.

Some modules have IDLEST registers that aren't in the CM module, such
as the AM3517 IDLEST bits.  So we also need a fallback function for
these non-CM odd cases.  Create a temporary one in mach-omap2/clock.c,
intended to exist until the SCM drivers are ready.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 3246cef151d..561969bb511 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -26,6 +26,54 @@ static struct cm_ll_data null_cm_ll_data;
 static struct cm_ll_data *cm_ll_data = &null_cm_ll_data;
 
 /**
+ * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * Given an absolute CM_IDLEST register address @idlest_reg, passes
+ * the PRCM instance offset and IDLEST register ID back to the caller
+ * via the @prcm_inst and @idlest_reg_id.  Returns -EINVAL upon error,
+ * or 0 upon success.  XXX This function is only needed until absolute
+ * register addresses are removed from the OMAP struct clk records.
+ */
+int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+			u8 *idlest_reg_id)
+{
+	if (!cm_ll_data->split_idlest_reg) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst,
+					   idlest_reg_id);
+}
+
+/**
+ * cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
+ * success, -EBUSY if the module doesn't enable in time, or -EINVAL if
+ * no per-SoC wait_module_ready() function pointer has been registered
+ * or if the idlest register is unknown on the SoC.
+ */
+int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	if (!cm_ll_data->wait_module_ready) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+}
+
+/**
  * cm_register - register per-SoC low-level data with the CM
  * @cld: low-level per-SoC OMAP CM data & function pointers to register
  *