Merge tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC power management and clock changes from Olof Johansson:
 "This branch contains a largeish set of updates of power management and
  clock setup.  The bulk of it is for OMAP/AM33xx platforms, but also a
  few around hotplug/suspend/resume on Exynos.

  It includes a split-up of some of the OMAP clock data into separate
  files which adds to the diffstat, but gross delta is fairly reasonable."

* tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h
  ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support
  watchdog: OMAP: fixup for ARM multiplatform support
  ARM: EXYNOS: Add flush_cache_all in suspend finisher
  ARM: EXYNOS: Remove scu_enable from cpuidle
  ARM: EXYNOS: Fix soft reboot hang after suspend/resume
  ARM: EXYNOS: Add support for rtc wakeup
  ARM: EXYNOS: fix the hotplug for Cortex-A15
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n
  ARM: OMAP4: USB: power down MUSB PHY during boot
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ...

1 files changed, 13 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 5854da168a9..d3326c474fd 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -21,7 +21,7 @@
 #include "cm-regbits-44xx.h"
 
 /* Supported only on OMAP4 */
-int omap4_dpllmx_gatectrl_read(struct clk *clk)
+int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
 {
 	u32 v;
 	u32 mask;
@@ -40,7 +40,7 @@ int omap4_dpllmx_gatectrl_read(struct clk *clk)
 	return v;
 }
 
-void omap4_dpllmx_allow_gatectrl(struct clk *clk)
+void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
 {
 	u32 v;
 	u32 mask;
@@ -58,7 +58,7 @@ void omap4_dpllmx_allow_gatectrl(struct clk *clk)
 	__raw_writel(v, clk->clksel_reg);
 }
 
-void omap4_dpllmx_deny_gatectrl(struct clk *clk)
+void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
 {
 	u32 v;
 	u32 mask;
@@ -76,9 +76,9 @@ void omap4_dpllmx_deny_gatectrl(struct clk *clk)
 	__raw_writel(v, clk->clksel_reg);
 }
 
-const struct clkops clkops_omap4_dpllmx_ops = {
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
 	.allow_idle	= omap4_dpllmx_allow_gatectrl,
-	.deny_idle	= omap4_dpllmx_deny_gatectrl,
+	.deny_idle      = omap4_dpllmx_deny_gatectrl,
 };
 
 /**
@@ -90,8 +90,10 @@ const struct clkops clkops_omap4_dpllmx_ops = {
  * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
  * upon success, or 0 upon error.
  */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+			unsigned long parent_rate)
 {
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 	unsigned long rate;
 	struct dpll_data *dd;
@@ -123,8 +125,11 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
  * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
  * ~0 if an error occurred in omap2_dpll_round_rate().
  */
-long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+				    unsigned long target_rate,
+				    unsigned long *parent_rate)
 {
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 	struct dpll_data *dd;
 	long r;
@@ -140,7 +145,7 @@ long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
 	if (v)
 		target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
 
-	r = omap2_dpll_round_rate(clk, target_rate);
+	r = omap2_dpll_round_rate(hw, target_rate, NULL);
 	if (r == ~0)
 		return r;