Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 - CBUS driver (an I2C variant)
 - continued rework of the omap driver
 - s3c2410 gets lots of fixes and gains pinctrl support
 - at91 gains DMA support
 - the GPIO muxer gains devicetree probing
 - typical fixes and additions all over

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
  i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
  i2c: at91: add dma support
  i2c: at91: change struct members indentation
  i2c: at91: fix compilation warning
  i2c: mxs: Do not disable the I2C SMBus quick mode
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Remove recently introduced performance overheads
  i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
  i2c: s3c2410: Add fix for i2c suspend/resume
  i2c: s3c2410: Fix code to free gpios
  i2c: i2c-cbus-gpio: introduce driver
  i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
  i2c: ocores: Add irq support for sparc
  i2c: omap: Move the remove constraint
  ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
  i2c: s3c2410: do not special case HDMIPHY stuck bus detection
  i2c: s3c2410: use exponential back off while polling for bus idle
  i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
  i2c: s3c2410: grab adapter lock while changing i2c clock
  i2c: s3c2410: Add support for pinctrl
  ...

1 files changed, 19 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fbb9b152cd5..df6d6acbc9e 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -120,6 +120,16 @@ static int __init omap_i2c_nr_ports(void)
 	return ports;
 }
 
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static const char name[] = "omap_i2c";
 
 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
@@ -157,6 +167,15 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
 	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
 	pdata->flags = dev_attr->flags;
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);