Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits)
  arm: omap: Add omap3_defconfig
  AM35xx: Defconfig for AM3517 EVM board
  AM35xx: Add support for AM3517 EVM board
  omap: 3630sdp: defconfig creation
  omap: 3630sdp: introduce 3630 sdp board support
  omap3: Add defconfig for IGEP v2 board
  omap3: Add minimal IGEP v2 support
  omap3: Add CompuLab CM-T35 defconfig
  omap3: Add CompuLab CM-T35 board support
  omap3: rx51: Add wl1251 wlan driver support
  omap3: rx51: Add SDRAM init
  omap1: Add default kernel configuration for Herald
  omap1: Add board support and LCD for HTC Herald
  omap: zoom2: update defconfig for LL_DEBUG_NONE
  omap: zoom3: defconfig creation
  omap3: zoom: Introduce zoom3 board support
  omap3: zoom: Drop i2c-1 speed to 2400
  omap3: zoom: rename zoom2 name to generic zoom
  omap3: zoom: split board file for software reuse
  omap3evm: MIgrate to smsc911x ethernet driver
  ...

Fix trivial conflict (two unrelated config options added next to each
other) in arch/arm/mach-omap2/Makefile

14 files changed, 258 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
new file mode 100644
index 00000000000..c93b29e21b7
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -0,0 +1,5 @@
+/*
+ * Defines for zoom boards
+ */
+extern int __init zoom_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);
diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h
new file mode 100644
index 00000000000..53b027441c5
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e9f255df916
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -0,0 +1,59 @@
+/* arch/arm/mach-omap2/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+#ifdef  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xfa000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xfa000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00fb0000	@ UART 3
+		add	\rx, \rx, #0x00006000
+#endif
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
new file mode 100644
index 00000000000..c7f1720bf28
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <plat/omap44xx.h>
+#endif
+#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
+#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#ifndef CONFIG_ARCH_OMAP4
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP2_VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
+		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+
+		.endm
+#else
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif
+
+		.macro	irq_prio_table
+		.endm
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
new file mode 100644
index 00000000000..be4d290d57e
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
new file mode 100644
index 00000000000..78edf9d33f7
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h
new file mode 100644
index 00000000000..fd78f31aa1a
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
new file mode 100644
index 00000000000..44dab772569
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
new file mode 100644
index 00000000000..ca6d32a917d
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h
new file mode 100644
index 00000000000..323675f21b6
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
new file mode 100644
index 00000000000..d488721ab90
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
new file mode 100644
index 00000000000..de9f8fc40e7
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
new file mode 100644
index 00000000000..78e0557bfd4
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
new file mode 100644
index 00000000000..9ce9b6e8ad2
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)