diff options
| author | Paul Walmsley <paul@pwsan.com> | 2009-09-03 20:14:02 +0300 |
|---|---|---|
| committer | paul <paul@twilight.(none)> | 2009-09-03 20:14:02 +0300 |
| commit | b3c6df3ab2b17cd7ddf927d39a64f235b25ac8d4 (patch) | |
| tree | 58d26a0b0dc5dc597519260ef04f8bff67cc4f8c /arch/arm/mach-omap2/io.c | |
| parent | 71348bcaac6f4c372525d4d62e88a82a7330435b (diff) | |
OMAP2/3 board-*.c files: read bootloader configuration earlier
Most board-*.c files read configuration data from the bootloader in
their .init_machine() function. This needs to happen earlier, at some
point before omap2_init_common_hw() is called. This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Diffstat (limited to 'arch/arm/mach-omap2/io.c')
| -rw-r--r-- | arch/arm/mach-omap2/io.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4bfe873e1b8..470b1d10c4e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -32,6 +32,7 @@ #include <mach/sram.h> #include <mach/sdrc.h> #include <mach/gpmc.h> +#include <mach/serial.h> #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" @@ -287,6 +288,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); + omap_serial_early_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); |