diff options
author | Ingo Molnar <mingo@elte.hu> | 2009-04-07 11:15:40 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2009-04-07 11:15:40 +0200 |
commit | 5e34437840d33554f69380584311743b39e8fbeb (patch) | |
tree | e081135619ee146af5efb9ee883afca950df5757 /arch/arm/mach-omap2/mmc-twl4030.c | |
parent | 77d05632baee21b1cef8730d7c06aa69601e4dca (diff) | |
parent | d508afb437daee7cf07da085b635c44a4ebf9b38 (diff) |
Merge branch 'linus' into core/softlockup
Conflicts:
kernel/sysctl.c
Diffstat (limited to 'arch/arm/mach-omap2/mmc-twl4030.c')
-rw-r--r-- | arch/arm/mach-omap2/mmc-twl4030.c | 187 |
1 files changed, 131 insertions, 56 deletions
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 437f52073f6..dc40b3e7220 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -17,6 +17,7 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/i2c/twl4030.h> +#include <linux/regulator/machine.h> #include <mach/hardware.h> #include <mach/control.h> @@ -44,6 +45,7 @@ #define VMMC2_315V 0x0c #define VMMC2_300V 0x0b #define VMMC2_285V 0x0a +#define VMMC2_280V 0x09 #define VMMC2_260V 0x08 #define VMMC2_185V 0x06 #define VMMC2_DEDICATED 0x2E @@ -59,8 +61,8 @@ static struct twl_mmc_controller { struct omap_mmc_platform_data *mmc; u8 twl_vmmc_dev_grp; u8 twl_mmc_dedicated; - char name[HSMMC_NAME_LEN]; -} hsmmc[] = { + char name[HSMMC_NAME_LEN + 1]; +} hsmmc[OMAP34XX_NR_MMC] = { { .twl_vmmc_dev_grp = VMMC1_DEV_GRP, .twl_mmc_dedicated = VMMC1_DEDICATED, @@ -98,6 +100,14 @@ static int twl_mmc_get_ro(struct device *dev, int slot) return gpio_get_value_cansleep(mmc->slots[0].gpio_wp); } +static int twl_mmc_get_cover_state(struct device *dev, int slot) +{ + struct omap_mmc_platform_data *mmc = dev->platform_data; + + /* NOTE: assumes card detect signal is active-low */ + return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); +} + /* * MMC Slot Initialization. */ @@ -166,66 +176,85 @@ static int twl_mmc_resume(struct device *dev, int slot) /* * Sets the MMC voltage in twl4030 */ + +#define MMC1_OCR (MMC_VDD_165_195 \ + |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) +#define MMC2_OCR (MMC_VDD_165_195 \ + |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \ + |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) + static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd) { int ret; - u8 vmmc, dev_grp_val; - - switch (1 << vdd) { - case MMC_VDD_35_36: - case MMC_VDD_34_35: - case MMC_VDD_33_34: - case MMC_VDD_32_33: - case MMC_VDD_31_32: - case MMC_VDD_30_31: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_315V; - else - vmmc = VMMC2_315V; - break; - case MMC_VDD_29_30: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_315V; - else - vmmc = VMMC2_300V; - break; - case MMC_VDD_27_28: - case MMC_VDD_26_27: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_285V; - else - vmmc = VMMC2_285V; - break; - case MMC_VDD_25_26: - case MMC_VDD_24_25: - case MMC_VDD_23_24: - case MMC_VDD_22_23: - case MMC_VDD_21_22: - case MMC_VDD_20_21: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_285V; - else - vmmc = VMMC2_260V; - break; - case MMC_VDD_165_195: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) + u8 vmmc = 0, dev_grp_val; + + if (!vdd) + goto doit; + + if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) { + /* VMMC1: max 220 mA. And for 8-bit mode, + * VSIM: max 50 mA + */ + switch (1 << vdd) { + case MMC_VDD_165_195: vmmc = VMMC1_185V; - else + /* and VSIM_180V */ + break; + case MMC_VDD_28_29: + vmmc = VMMC1_285V; + /* and VSIM_280V */ + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + vmmc = VMMC1_300V; + /* and VSIM_300V */ + break; + case MMC_VDD_31_32: + vmmc = VMMC1_315V; + /* error if VSIM needed */ + break; + default: + return -EINVAL; + } + } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) { + /* VMMC2: max 100 mA */ + switch (1 << vdd) { + case MMC_VDD_165_195: vmmc = VMMC2_185V; - break; - default: - vmmc = 0; - break; + break; + case MMC_VDD_25_26: + case MMC_VDD_26_27: + vmmc = VMMC2_260V; + break; + case MMC_VDD_27_28: + vmmc = VMMC2_280V; + break; + case MMC_VDD_28_29: + vmmc = VMMC2_285V; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + vmmc = VMMC2_300V; + break; + case MMC_VDD_31_32: + vmmc = VMMC2_315V; + break; + default: + return -EINVAL; + } + } else { + return -EINVAL; } - if (vmmc) +doit: + if (vdd) dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */ else dev_grp_val = LDO_CLR; /* Power down */ ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, dev_grp_val, c->twl_vmmc_dev_grp); - if (ret) + if (ret || !vdd) return ret; ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, @@ -242,6 +271,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, struct twl_mmc_controller *c = &hsmmc[0]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* + * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the + * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both + * 1.8V and 3.0V modes, controlled by the PBIAS register. + * + * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which + * is most naturally TWL VSIM; those pins also use PBIAS. + */ if (power_on) { if (cpu_is_omap2430()) { reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1); @@ -298,6 +335,12 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd struct twl_mmc_controller *c = &hsmmc[1]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* + * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP + * VDDS is used to power the pins, optionally with a transceiver to + * support cards using voltages other than VDDS (1.8V nominal). When a + * transceiver is used, DAT3..7 are muxed as transceiver control pins. + */ if (power_on) { if (mmc->slots[0].internal_clock) { u32 reg; @@ -314,6 +357,16 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd return ret; } +static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ + /* + * Assume MMC3 has self-powered device connected, for example on-board + * chip with external power source. + */ + return 0; +} + static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) @@ -349,13 +402,13 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) return; } - sprintf(twl->name, "mmc%islot%i", c->mmc, 1); + if (c->name) + strncpy(twl->name, c->name, HSMMC_NAME_LEN); + else + snprintf(twl->name, ARRAY_SIZE(twl->name), + "mmc%islot%i", c->mmc, 1); mmc->slots[0].name = twl->name; mmc->nr_slots = 1; - mmc->slots[0].ocr_mask = MMC_VDD_165_195 | - MMC_VDD_26_27 | MMC_VDD_27_28 | - MMC_VDD_29_30 | - MMC_VDD_30_31 | MMC_VDD_31_32; mmc->slots[0].wires = c->wires; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; @@ -369,7 +422,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) mmc->slots[0].switch_pin = c->gpio_cd; mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd); - mmc->slots[0].card_detect = twl_mmc_card_detect; + if (c->cover_only) + mmc->slots[0].get_cover_state = twl_mmc_get_cover_state; + else + mmc->slots[0].card_detect = twl_mmc_card_detect; } else mmc->slots[0].switch_pin = -EINVAL; @@ -385,24 +441,43 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) /* NOTE: we assume OMAP's MMC1 and MMC2 use * the TWL4030's VMMC1 and VMMC2, respectively; - * and that OMAP's MMC3 isn't used. + * and that MMC3 device has it's own power source. */ switch (c->mmc) { case 1: mmc->slots[0].set_power = twl_mmc1_set_power; + mmc->slots[0].ocr_mask = MMC1_OCR; break; case 2: mmc->slots[0].set_power = twl_mmc2_set_power; + if (c->transceiver) + mmc->slots[0].ocr_mask = MMC2_OCR; + else + mmc->slots[0].ocr_mask = MMC_VDD_165_195; + break; + case 3: + mmc->slots[0].set_power = twl_mmc3_set_power; + mmc->slots[0].ocr_mask = MMC_VDD_165_195; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); + kfree(mmc); continue; } hsmmc_data[c->mmc - 1] = mmc; } omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); + + /* pass the device nodes back to board setup code */ + for (c = controllers; c->mmc; c++) { + struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; + + if (!c->mmc || c->mmc > nr_hsmmc) + continue; + c->dev = mmc->dev; + } } #endif |