Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

1 files changed, 408 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
new file mode 100644
index 00000000000..437f52073f6
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -0,0 +1,408 @@
+/*
+ * linux/arch/arm/mach-omap2/mmc-twl4030.c
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <mach/control.h>
+#include <mach/mmc.h>
+#include <mach/board.h>
+
+#include "mmc-twl4030.h"
+
+#if defined(CONFIG_TWL4030_CORE) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
+
+#define LDO_CLR			0x00
+#define VSEL_S2_CLR		0x40
+
+#define VMMC1_DEV_GRP		0x27
+#define VMMC1_CLR		0x00
+#define VMMC1_315V		0x03
+#define VMMC1_300V		0x02
+#define VMMC1_285V		0x01
+#define VMMC1_185V		0x00
+#define VMMC1_DEDICATED		0x2A
+
+#define VMMC2_DEV_GRP		0x2B
+#define VMMC2_CLR		0x40
+#define VMMC2_315V		0x0c
+#define VMMC2_300V		0x0b
+#define VMMC2_285V		0x0a
+#define VMMC2_260V		0x08
+#define VMMC2_185V		0x06
+#define VMMC2_DEDICATED		0x2E
+
+#define VMMC_DEV_GRP_P1		0x20
+
+static u16 control_pbias_offset;
+static u16 control_devconf1_offset;
+
+#define HSMMC_NAME_LEN	9
+
+static struct twl_mmc_controller {
+	struct omap_mmc_platform_data	*mmc;
+	u8		twl_vmmc_dev_grp;
+	u8		twl_mmc_dedicated;
+	char		name[HSMMC_NAME_LEN];
+} hsmmc[] = {
+	{
+		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
+		.twl_mmc_dedicated		= VMMC1_DEDICATED,
+	},
+	{
+		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
+		.twl_mmc_dedicated		= VMMC2_DEDICATED,
+	},
+};
+
+static int twl_mmc_card_detect(int irq)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		struct omap_mmc_platform_data *mmc;
+
+		mmc = hsmmc[i].mmc;
+		if (!mmc)
+			continue;
+		if (irq != mmc->slots[0].card_detect_irq)
+			continue;
+
+		/* NOTE: assumes card detect signal is active-low */
+		return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+	}
+	return -ENOSYS;
+}
+
+static int twl_mmc_get_ro(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	/* NOTE: assumes write protect signal is active-high */
+	return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
+}
+
+/*
+ * MMC Slot Initialization.
+ */
+static int twl_mmc_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int ret = 0;
+	int i;
+
+	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+	if (ret)
+		goto done;
+	ret = gpio_direction_input(mmc->slots[0].switch_pin);
+	if (ret)
+		goto err;
+
+	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		if (hsmmc[i].name == mmc->slots[0].name) {
+			hsmmc[i].mmc = mmc;
+			break;
+		}
+	}
+
+	return 0;
+
+err:
+	gpio_free(mmc->slots[0].switch_pin);
+done:
+	mmc->slots[0].card_detect_irq = 0;
+	mmc->slots[0].card_detect = NULL;
+
+	dev_err(dev, "err %d configuring card detect\n", ret);
+	return ret;
+}
+
+static void twl_mmc_cleanup(struct device *dev)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	gpio_free(mmc->slots[0].switch_pin);
+}
+
+#ifdef CONFIG_PM
+
+static int twl_mmc_suspend(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	disable_irq(mmc->slots[0].card_detect_irq);
+	return 0;
+}
+
+static int twl_mmc_resume(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	enable_irq(mmc->slots[0].card_detect_irq);
+	return 0;
+}
+
+#else
+#define twl_mmc_suspend	NULL
+#define twl_mmc_resume	NULL
+#endif
+
+/*
+ * Sets the MMC voltage in twl4030
+ */
+static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
+{
+	int ret;
+	u8 vmmc, dev_grp_val;
+
+	switch (1 << vdd) {
+	case MMC_VDD_35_36:
+	case MMC_VDD_34_35:
+	case MMC_VDD_33_34:
+	case MMC_VDD_32_33:
+	case MMC_VDD_31_32:
+	case MMC_VDD_30_31:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_315V;
+		else
+			vmmc = VMMC2_315V;
+		break;
+	case MMC_VDD_29_30:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_315V;
+		else
+			vmmc = VMMC2_300V;
+		break;
+	case MMC_VDD_27_28:
+	case MMC_VDD_26_27:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_285V;
+		else
+			vmmc = VMMC2_285V;
+		break;
+	case MMC_VDD_25_26:
+	case MMC_VDD_24_25:
+	case MMC_VDD_23_24:
+	case MMC_VDD_22_23:
+	case MMC_VDD_21_22:
+	case MMC_VDD_20_21:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_285V;
+		else
+			vmmc = VMMC2_260V;
+		break;
+	case MMC_VDD_165_195:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_185V;
+		else
+			vmmc = VMMC2_185V;
+		break;
+	default:
+		vmmc = 0;
+		break;
+	}
+
+	if (vmmc)
+		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
+	else
+		dev_grp_val = LDO_CLR;		/* Power down */
+
+	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+					dev_grp_val, c->twl_vmmc_dev_grp);
+	if (ret)
+		return ret;
+
+	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+					vmmc, c->twl_mmc_dedicated);
+
+	return ret;
+}
+
+static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	u32 reg;
+	int ret = 0;
+	struct twl_mmc_controller *c = &hsmmc[0];
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (power_on) {
+		if (cpu_is_omap2430()) {
+			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
+			if ((1 << vdd) >= MMC_VDD_30_31)
+				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			else
+				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
+		}
+
+		if (mmc->slots[0].internal_clock) {
+			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
+			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
+		}
+
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= OMAP2_PBIASSPEEDCTRL0;
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+
+		ret = twl_mmc_set_voltage(c, vdd);
+
+		/* 100ms delay required for PBIAS configuration */
+		msleep(100);
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP2_PBIASLITEVMODE0;
+		else
+			reg |= OMAP2_PBIASLITEVMODE0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+
+		ret = twl_mmc_set_voltage(c, 0);
+
+		/* 100ms delay required for PBIAS configuration */
+		msleep(100);
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
+			OMAP2_PBIASLITEVMODE0);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+
+	return ret;
+}
+
+static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+{
+	int ret;
+	struct twl_mmc_controller *c = &hsmmc[1];
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (power_on) {
+		if (mmc->slots[0].internal_clock) {
+			u32 reg;
+
+			reg = omap_ctrl_readl(control_devconf1_offset);
+			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+			omap_ctrl_writel(reg, control_devconf1_offset);
+		}
+		ret = twl_mmc_set_voltage(c, vdd);
+	} else {
+		ret = twl_mmc_set_voltage(c, 0);
+	}
+
+	return ret;
+}
+
+static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
+
+void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
+{
+	struct twl4030_hsmmc_info *c;
+	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+
+	if (cpu_is_omap2430()) {
+		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+		nr_hsmmc = 2;
+	} else {
+		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+	}
+
+	for (c = controllers; c->mmc; c++) {
+		struct twl_mmc_controller *twl = hsmmc + c->mmc - 1;
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc) {
+			pr_debug("MMC%d: no such controller\n", c->mmc);
+			continue;
+		}
+		if (mmc) {
+			pr_debug("MMC%d: already configured\n", c->mmc);
+			continue;
+		}
+
+		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+		if (!mmc) {
+			pr_err("Cannot allocate memory for mmc device!\n");
+			return;
+		}
+
+		sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
+		mmc->slots[0].name = twl->name;
+		mmc->nr_slots = 1;
+		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+					MMC_VDD_26_27 | MMC_VDD_27_28 |
+					MMC_VDD_29_30 |
+					MMC_VDD_30_31 | MMC_VDD_31_32;
+		mmc->slots[0].wires = c->wires;
+		mmc->slots[0].internal_clock = !c->ext_clock;
+		mmc->dma_mask = 0xffffffff;
+
+		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		if (gpio_is_valid(c->gpio_cd)) {
+			mmc->init = twl_mmc_late_init;
+			mmc->cleanup = twl_mmc_cleanup;
+			mmc->suspend = twl_mmc_suspend;
+			mmc->resume = twl_mmc_resume;
+
+			mmc->slots[0].switch_pin = c->gpio_cd;
+			mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
+			mmc->slots[0].card_detect = twl_mmc_card_detect;
+		} else
+			mmc->slots[0].switch_pin = -EINVAL;
+
+		/* write protect normally uses an OMAP gpio */
+		if (gpio_is_valid(c->gpio_wp)) {
+			gpio_request(c->gpio_wp, "mmc_wp");
+			gpio_direction_input(c->gpio_wp);
+
+			mmc->slots[0].gpio_wp = c->gpio_wp;
+			mmc->slots[0].get_ro = twl_mmc_get_ro;
+		} else
+			mmc->slots[0].gpio_wp = -EINVAL;
+
+		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
+		 * the TWL4030's VMMC1 and VMMC2, respectively;
+		 * and that OMAP's MMC3 isn't used.
+		 */
+
+		switch (c->mmc) {
+		case 1:
+			mmc->slots[0].set_power = twl_mmc1_set_power;
+			break;
+		case 2:
+			mmc->slots[0].set_power = twl_mmc2_set_power;
+			break;
+		default:
+			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			continue;
+		}
+		hsmmc_data[c->mmc - 1] = mmc;
+	}
+
+	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+}
+
+#endif