OMAP: hwmod: Wait the idle status to be disabled

It is mandatory to wait for a module to be in disabled state before
potentially disabling source clock or re-asserting a reset.

omap_hwmod_idle and omap_hwmod_shutdown does not wait for
the module to be fully idle.

Add a cm_xxx accessor to wait the clkctrl idle status to be disabled.
Fix hwmod_[idle|shutdown] to use this API.

Based on Rajendra's initial patch.

Please note that most interconnects hwmod will return one timeout because
it is impossible for them to be in idle since the processor is accessing
the registers though the interconnect.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Todd Poynor <toddpoynor@google.com>
[paul@pwsan.com: move cpu_is_*() tests to the top of _wait_target_disable();
 incorporate some feedback from Todd]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 40 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 00241ea5bf0..d21f49b8764 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1102,6 +1102,36 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 }
 
 /**
+ * _wait_target_disable - wait for a module to be disabled
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to enter slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully enters
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_idle() function.
+ */
+static int _wait_target_disable(struct omap_hwmod *oh)
+{
+	/* TODO: For now just handle OMAP4+ */
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		return 0;
+
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
+					     oh->clkdm->cm_inst,
+					     oh->clkdm->clkdm_offs,
+					     oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
  * _lookup_hardreset - fill register bit info for this hwmod/reset line
  * @oh: struct omap_hwmod *
  * @name: name of the reset line in the context of this hwmod
@@ -1410,6 +1440,8 @@ static int _enable(struct omap_hwmod *oh)
  */
 static int _idle(struct omap_hwmod *oh)
 {
+	int ret;
+
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -1422,6 +1454,10 @@ static int _idle(struct omap_hwmod *oh)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 	_disable_clocks(oh);
+	ret = _wait_target_disable(oh);
+	if (ret)
+		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+			oh->name);
 
 	/* Mux pins for device idle if populated */
 	if (oh->mux && oh->mux->pads_dynamic)
@@ -1514,6 +1550,10 @@ static int _shutdown(struct omap_hwmod *oh)
 		_del_initiator_dep(oh, mpu_oh);
 		/* XXX what about the other system initiators here? dma, dsp */
 		_disable_clocks(oh);
+		ret = _wait_target_disable(oh);
+		if (ret)
+			pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+				oh->name);
 	}
 	/* XXX Should this code also force-disable the optional clocks? */