Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3

* commit 'v3.3-rc1': (9775 commits)
  Linux 3.3-rc1
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  uml: fix compile for x86-64
  MPILIB: Add a missing ENOMEM check
  tpm: fix (ACPI S3) suspend regression
  nvme: fix merge error due to change of 'make_request_fn' fn type
  xen: using EXPORT_SYMBOL requires including export.h
  gpio: tps65910: Use correct offset for gpio initialization
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  ...

1 files changed, 117 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 495a31a7e8a..33dd655e6aa 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 
@@ -27,6 +27,24 @@
 #include "prcm44xx.h"
 #include "prminst44xx.h"
 
+static const struct omap_prcm_irq omap4_prcm_irqs[] = {
+	OMAP_PRCM_IRQ("wkup",   0,      0),
+	OMAP_PRCM_IRQ("io",     9,      1),
+};
+
+static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
+	.ack			= OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+	.mask			= OMAP4_PRM_IRQENABLE_MPU_OFFSET,
+	.nr_regs		= 2,
+	.irqs			= omap4_prcm_irqs,
+	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
+	.irq			= OMAP44XX_IRQ_PRCM,
+	.read_pending_irqs	= &omap44xx_prm_read_pending_irqs,
+	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
+	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,
+	.restore_irqen		= &omap44xx_prm_restore_irqen,
+};
+
 /* PRM low-level functions */
 
 /* Read a register in a CM/PRM instance in the PRM module */
@@ -121,3 +139,101 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
 					       OMAP4430_PRM_DEVICE_INST,
 					       offset);
 }
+
+static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
+{
+	u32 mask, st;
+
+	/* XXX read mask from RAM? */
+	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
+	st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
+
+	return mask & st;
+}
+
+/**
+ * omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to two consecutive u32s, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the two u32s pointed to by @events.
+ * No return value.
+ */
+void omap44xx_prm_read_pending_irqs(unsigned long *events)
+{
+	events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
+					  OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+
+	events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
+					  OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+}
+
+/**
+ * omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete.  Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits.  No return value.
+ */
+void omap44xx_prm_ocp_barrier(void)
+{
+	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+				OMAP4_REVISION_PRM_OFFSET);
+}
+
+/**
+ * omap44xx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU* regs
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers to
+ * @saved_mask.  @saved_mask must be allocated by the caller.
+ * Intended to be used in the PRM interrupt handler suspend callback.
+ * The OCP barrier is needed to ensure the write to disable PRM
+ * interrupts reaches the PRM before returning; otherwise, spurious
+ * interrupts might occur.  No return value.
+ */
+void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+	saved_mask[0] =
+		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+	saved_mask[1] =
+		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+
+	/* OCP barrier */
+	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+				OMAP4_REVISION_PRM_OFFSET);
+}
+
+/**
+ * omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from
+ * @saved_mask.  Intended to be used in the PRM interrupt handler resume
+ * callback to restore values saved by omap44xx_prm_save_and_clear_irqen().
+ * No OCP barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM.  No return value.
+ */
+void omap44xx_prm_restore_irqen(u32 *saved_mask)
+{
+	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
+	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST,
+				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+}
+
+static int __init omap4xxx_prcm_init(void)
+{
+	if (cpu_is_omap44xx())
+		return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+	return 0;
+}
+subsys_initcall(omap4xxx_prcm_init);