ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier

Add PRM functions to test for pending PRM IRQs.  This will be used in
a subsequent patch to implement the PRM interrupt handler on the MPU.

Add PRM functions to ensure that all outstanding writes from the MPU
to the PRM IP block have completed before continuing execution.  This
will be used in a subsequent patch to ensure that all PRM interrupt
status bits are cleared in the hardware before exiting the ISR.
Normally we would not expose such a low-level function to other code.
But the current implementation of the PRM interrupt code, which uses
the generic IRQ chip code, doesn't give us a choice.

The pending PRM IRQ functions are based on code originally written by
Tero Kristo <t-kristo@ti.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>

1 files changed, 42 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 495a31a7e8a..9b21154f016 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -121,3 +121,45 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
 					       OMAP4430_PRM_DEVICE_INST,
 					       offset);
 }
+
+static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
+{
+	u32 mask, st;
+
+	/* XXX read mask from RAM? */
+	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
+	st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
+
+	return mask & st;
+}
+
+/**
+ * omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to two consecutive u32s, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the two u32s pointed to by @events.
+ * No return value.
+ */
+void omap44xx_prm_read_pending_irqs(unsigned long *events)
+{
+	events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
+					  OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+
+	events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
+					  OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+}
+
+/**
+ * omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete.  Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits.  No return value.
+ */
+void omap44xx_prm_ocp_barrier(void)
+{
+	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+				OMAP4_REVISION_PRM_OFFSET);
+}