Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:

imx soc changes for 3.11:

* New SoCs i.MX6 Sololite and Vybrid VF610 support
* imx5 and imx6 clock fixes and additions
* Update clock driver to use of_clk_init() function
* Refactor restart routine mxc_restart() to get it work for DT boot
  as well
* Clean up mxc specific ulpi access ops
* imx defconfig updates

* tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (29 commits)
  ARM: imx_v6_v7_defconfig: Enable Vybrid VF610
  ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default
  ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd
  ARM: imx_v6_v7_defconfig: Enable PWM and backlight options
  ARM: imx: Remove mxc specific ulpi access ops
  ARM: imx: add initial support for VF610
  ARM: imx: add VF610 clock support
  ARM: imx_v6_v7_defconfig: enable parallel display
  ARM: imx: clk: No need to initialize phandle struct
  ARM: imx: irq-common: Include header to avoid sparse warning
  ARM: imx: Enable mx6 solo-lite support
  ARM: imx6: use common of_clk_init() call to initialize clocks
  ARM: imx6q: call of_clk_init() to register fixed rate clocks
  ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE
  ARM: i.MX6: clk: add different DualLite MLB clock config
  ARM i.MX5: Add S/PDIF clocks
  ARM i.MX53: Add SATA clock
  ARM: imx6q: clk: add the eim_slow clock
  ARM: imx: remove MLB PLL from pllv3
  ARM: imx: disable pll8_mlb in mx6q_clks
  ...

Conflicts:
	arch/arm/Kconfig.debug (simple add/add conflict)

Includes an update to 3.10-rc6

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 21 insertions, 12 deletions

diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 8f3bf4e5090..bbd6a3f717e 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -20,11 +20,12 @@
 
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/io.h>
 
 #include "clock.h"
 #include "clock36xx.h"
-
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
 
 /**
  * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
@@ -39,29 +40,28 @@
  */
 int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 {
-	struct clk_hw_omap *parent;
+	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
-	u32 dummy_v, orig_v, clksel_shift;
+	u32 dummy_v, orig_v;
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
 	ret = omap2_dflt_clk_enable(clk);
 
 	parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
-	parent = to_clk_hw_omap(parent_hw);
+	parent = to_clk_divider(parent_hw);
 
 	/* Restore the dividers */
 	if (!ret) {
-		clksel_shift = __ffs(parent->clksel_mask);
-		orig_v = __raw_readl(parent->clksel_reg);
+		orig_v = __raw_readl(parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
-		dummy_v ^= (1 << clksel_shift);
-		__raw_writel(dummy_v, parent->clksel_reg);
+		dummy_v ^= (1 << parent->shift);
+		__raw_writel(dummy_v, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->clksel_reg);
+		__raw_writel(orig_v, parent->reg);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 1e2a6fb835c..0c9a183131e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2008,6 +2008,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	},
 };
 
+/* uart2 */
+static struct omap_hwmod_dma_info uart2_edma_reqs[] = {
+	{ .name = "tx",	.dma_req = 28, },
+	{ .name = "rx",	.dma_req = 29, },
+	{ .dma_req = -1 }
+};
+
 static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
 	{ .irq = 73 + OMAP_INTC_START, },
 	{ .irq = -1 },
@@ -2019,7 +2026,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
 	.clkdm_name	= "l4ls_clkdm",
 	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart2_irqs,
-	.sdma_reqs	= uart1_edma_reqs,
+	.sdma_reqs	= uart2_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
 	.prcm		= {
 		.omap4	= {
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c01859398b5..5a2d8034c8d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	if (omap3_has_iva())
-		omap3_iva_idle();
+	/*
+	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
+	 */
+	omap3_iva_idle();
 
 	omap3_d2d_idle();
 }