Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

22 files changed, 1569 insertions, 205 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2feb6870b73..93ee990618e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,15 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
 		devices.o serial.o gpmc.o timer-gp.o
 
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+
+# Functions loaded to SRAM
+obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ab9fc57d25f..15675bce801 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -41,6 +41,24 @@
 
 #define MAX_CLOCK_ENABLE_WAIT		100000
 
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER		1
+#define DPLL_MIN_DIVIDER		1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW		(1 << 0)
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR		64
+#define DPLL_SCALE_BASE			2
+#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
+					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
@@ -95,7 +113,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
 	u32 dpll_mult, dpll_div, dpll;
-	const struct dpll_data *dd;
+	struct dpll_data *dd;
 
 	dd = clk->dpll_data;
 	/* REVISIT: What do we return on error? */
@@ -603,7 +621,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 	clk->rate = clk->parent->rate / new_div;
 
 	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
+			OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
 		wmb();
 	}
 
@@ -723,6 +742,184 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return 0;
 }
 
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm.  The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm).  So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	clk->dpll_data->rate_tolerance = tolerance;
+
+	return 0;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+{
+	unsigned long long num;
+
+	num = (unsigned long long)parent_rate * m;
+	do_div(num, n);
+	return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+			   unsigned long target_rate,
+			   unsigned long parent_rate)
+{
+	int flags = 0, carry = 0;
+
+	/* Unscale m and round if necessary */
+	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+		carry = 1;
+	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+	/*
+	 * The new rate must be <= the target rate to avoid programming
+	 * a rate that is impossible for the hardware to handle
+	 */
+	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+	if (*new_rate > target_rate) {
+		(*m)--;
+		*new_rate = 0;
+	}
+
+	/* Guard against m underflow */
+	if (*m < DPLL_MIN_MULTIPLIER) {
+		*m = DPLL_MIN_MULTIPLIER;
+		*new_rate = 0;
+		flags = DPLL_MULT_UNDERFLOW;
+	}
+
+	if (*new_rate == 0)
+		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+	return flags;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called.  Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption.  Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again.  Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	int m, n, r, e, scaled_max_m;
+	unsigned long scaled_rt_rp, new_rate;
+	int min_e = -1, min_e_m = -1, min_e_n = -1;
+
+	if (!clk || !clk->dpll_data)
+		return ~0;
+
+	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+		 "%ld\n", clk->name, target_rate);
+
+	scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+
+	clk->dpll_data->last_rounded_rate = 0;
+
+	for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+
+		/* Compute the scaled DPLL multiplier, based on the divider */
+		m = scaled_rt_rp * n;
+
+		/*
+		 * Since we're counting n down, a m overflow means we can
+		 * can immediately skip to the next n
+		 */
+		if (m > scaled_max_m)
+			continue;
+
+		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+				    clk->parent->rate);
+
+		e = target_rate - new_rate;
+		pr_debug("clock: n = %d: m = %d: rate error is %d "
+			 "(new_rate = %ld)\n", n, m, e, new_rate);
+
+		if (min_e == -1 ||
+		    min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+			min_e = e;
+			min_e_m = m;
+			min_e_n = n;
+
+			pr_debug("clock: found new least error %d\n", min_e);
+		}
+
+		/*
+		 * Since we're counting n down, a m underflow means we
+		 * can bail out completely (since as n decreases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
+		 */
+		if (r & DPLL_MULT_UNDERFLOW)
+			break;
+	}
+
+	if (min_e < 0) {
+		pr_debug("clock: error: target rate or tolerance too low\n");
+		return ~0;
+	}
+
+	clk->dpll_data->last_rounded_m = min_e_m;
+	clk->dpll_data->last_rounded_n = min_e_n;
+	clk->dpll_data->last_rounded_rate =
+		_dpll_compute_new_rate(clk->parent->rate, min_e_m,  min_e_n);
+
+	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+		 min_e, min_e_m, min_e_n);
+	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
+		 clk->dpll_data->last_rounded_rate, target_rate);
+
+	return clk->dpll_data->last_rounded_rate;
+}
+
 /*-------------------------------------------------------------------------
  * Omap2 clock reset and init functions
  *-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d5980a9e09a..3cd37cb57c5 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -18,11 +18,16 @@
 
 #include <asm/arch/clock.h>
 
+/* The maximum error between a target DPLL rate and the rounded rate in Hz */
+#define DEFAULT_DPLL_RATE_TOLERANCE	50000
+
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
+int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
@@ -42,6 +47,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
+void omap2_clk_prepare_for_reboot(void);
 
 extern u8 cpu_mask;
 
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ece32d8acba..aa567876651 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -154,7 +154,7 @@ static void omap2_clk_fixed_disable(struct clk *clk)
  * Uses the current prcm set to tell if a rate is valid.
  * You can go slower, but not faster within a given rate set.
  */
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
+long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
@@ -183,14 +183,14 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
 
 }
 
-static void omap2_dpll_recalc(struct clk *clk)
+static void omap2_dpllcore_recalc(struct clk *clk)
 {
 	clk->rate = omap2_get_dpll_rate_24xx(clk);
 
 	propagate_rate(clk);
 }
 
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 {
 	u32 cur_rate, low, mult, div, valid_rate, done_rate;
 	u32 bypass = 0;
@@ -209,7 +209,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
 	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
 		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
 	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpll_round_rate(rate);
+		valid_rate = omap2_dpllcore_round_rate(rate);
 		if (valid_rate != rate)
 			goto dpll_exit;
 
@@ -256,7 +256,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
 		omap2_init_memory_params(omap2_dll_force_needed());
 		omap2_reprogram_sdrc(done_rate, 0);
 	}
-	omap2_dpll_recalc(&dpll_ck);
+	omap2_dpllcore_recalc(&dpll_ck);
 	ret = 0;
 
 dpll_exit:
@@ -383,7 +383,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 		local_irq_restore(flags);
 	}
-	omap2_dpll_recalc(&dpll_ck);
+	omap2_dpllcore_recalc(&dpll_ck);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88081ed13f9..be4e25554e0 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -30,12 +30,12 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
 static void omap2_sys_clk_recalc(struct clk *clk);
 static void omap2_osc_clk_recalc(struct clk *clk);
 static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpll_recalc(struct clk *clk);
+static void omap2_dpllcore_recalc(struct clk *clk);
 static int omap2_clk_fixed_enable(struct clk *clk);
 static void omap2_clk_fixed_disable(struct clk *clk);
 static int omap2_enable_osc_ck(struct clk *clk);
 static void omap2_disable_osc_ck(struct clk *clk);
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
@@ -665,20 +665,27 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
  * deal with this
  */
 
-static const struct dpll_data dpll_dd = {
+static struct dpll_data dpll_dd = {
 	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
 	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.max_multiplier		= 1024,
+	.max_divider		= 16,
+	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
 };
 
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
 static struct clk dpll_ck = {
 	.name		= "dpll_ck",
 	.parent		= &sys_ck,		/* Can be func_32k also */
 	.dpll_data	= &dpll_dd,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES | ALWAYS_ENABLED,
-	.recalc		= &omap2_dpll_recalc,
-	.set_rate	= &omap2_reprogram_dpll,
+	.recalc		= &omap2_dpllcore_recalc,
+	.set_rate	= &omap2_reprogram_dpllcore,
 };
 
 static struct clk apll96_ck = {
@@ -1747,7 +1754,8 @@ static struct clk gpt12_fck = {
 };
 
 static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
+	.name		= "mcbsp_ick",
+	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1756,7 +1764,8 @@ static struct clk mcbsp1_ick = {
 };
 
 static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
+	.name		= "mcbsp_fck",
+	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1765,7 +1774,8 @@ static struct clk mcbsp1_fck = {
 };
 
 static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
+	.name		= "mcbsp_ick",
+	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1774,7 +1784,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
+	.name		= "mcbsp_fck",
+	.id		= 2,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1783,7 +1794,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
+	.name		= "mcbsp_ick",
+	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1792,7 +1804,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
+	.name		= "mcbsp_fck",
+	.id		= 3,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1801,7 +1814,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
+	.name		= "mcbsp_ick",
+	.id		= 4,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1810,7 +1824,8 @@ static struct clk mcbsp4_ick = {
 };
 
 static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
+	.name		= "mcbsp_fck",
+	.id		= 4,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1819,7 +1834,8 @@ static struct clk mcbsp4_fck = {
 };
 
 static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
+	.name		= "mcbsp_ick",
+	.id		= 5,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1828,7 +1844,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
+	.name		= "mcbsp_fck",
+	.id		= 5,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index b42bdd6079a..4263099b1ad 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -1,10 +1,11 @@
 /*
  * OMAP3-specific clock framework functions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
  *
  * Parts of this code are based on code written by
  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -23,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/limits.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -37,8 +39,11 @@
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-/* CM_CLKEN_PLL*.EN* bit values */
-#define DPLL_LOCKED		0x7
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
 
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
@@ -53,6 +58,290 @@ static void omap3_dpll_recalc(struct clk *clk)
 	propagate_rate(clk);
 }
 
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+
+	cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
+			dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+	u32 idlest_mask;
+
+	dd = clk->dpll_data;
+
+	state <<= dd->idlest_bit;
+	idlest_mask = 1 << dd->idlest_bit;
+
+	while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+	       i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+		       clk->name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk->name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+	u8 ai;
+	int r;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	pr_debug("clock: locking DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	if (ai) {
+		/*
+		 * If no downstream clocks are enabled, CM_IDLEST bit
+		 * may never become active, so don't wait for DPLL to lock.
+		 */
+		r = 0;
+		omap3_dpll_allow_idle(clk);
+	} else {
+		r = _omap3_wait_dpll_status(clk, 1);
+		omap3_dpll_deny_idle(clk);
+	};
+
+	return r;
+}
+
+/*
+ * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+	int r;
+	u8 ai;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+	u8 ai;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static int omap3_noncore_dpll_enable(struct clk *clk)
+{
+	int r;
+
+	if (clk == &dpll3_ck)
+		return -EINVAL;
+
+	if (clk->parent->rate == clk_get_rate(clk))
+		r = _omap3_noncore_dpll_bypass(clk);
+	else
+		r = _omap3_noncore_dpll_lock(clk);
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static void omap3_noncore_dpll_disable(struct clk *clk)
+{
+	if (clk == &dpll3_ck)
+		return;
+
+	_omap3_noncore_dpll_stop(clk);
+}
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	v = cm_read_reg(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	cm_rmw_reg_bits(dd->autoidle_mask,
+			DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
+			dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	cm_rmw_reg_bits(dd->autoidle_mask,
+			DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
+			dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -89,6 +378,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 		propagate_rate(clk);
 }
 
+/* Common clock code */
+
 /*
  * As it is structured now, this will prevent an OMAP2/3 multiboot
  * kernel from compiling.  This will need further attention.
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c9c5972a2e2..05757eb032b 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,14 +1,19 @@
 /*
  * OMAP3 clock framework
  *
- * Virtual clocks are introduced as a convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
@@ -24,6 +29,15 @@
 
 static void omap3_dpll_recalc(struct clk *clk);
 static void omap3_clkoutx2_recalc(struct clk *clk);
+static void omap3_dpll_allow_idle(struct clk *clk);
+static void omap3_dpll_deny_idle(struct clk *clk);
+static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_enable(struct clk *clk);
+static void omap3_noncore_dpll_disable(struct clk *clk);
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT		2048
+#define OMAP3_MAX_DPLL_DIV		128
 
 /*
  * DPLL1 supplies clock to the MPU.
@@ -33,6 +47,11 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP		0x1
+#define DPLL_LOW_POWER_BYPASS		0x5
+#define DPLL_LOCKED			0x7
+
 /* PRM CLOCKS */
 
 /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
@@ -240,15 +259,23 @@ static const struct clksel_rate div16_dpll_rates[] = {
 /* DPLL1 */
 /* MPU clock source */
 /* Type: DPLL */
-static const struct dpll_data dpll1_dd = {
+static struct dpll_data dpll1_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_bit	= OMAP3430_ST_MPU_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll1_ck = {
@@ -256,6 +283,7 @@ static struct clk dpll1_ck = {
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll1_dd,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -297,22 +325,34 @@ static struct clk dpll1_x2m2_ck = {
 /* IVA2 clock source */
 /* Type: DPLL */
 
-static const struct dpll_data dpll2_dd = {
+static struct dpll_data dpll2_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+				(1 << DPLL_LOW_POWER_BYPASS),
 	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_bit	= OMAP3430_ST_IVA2_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll2_ck = {
 	.name		= "dpll2_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -338,10 +378,12 @@ static struct clk dpll2_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* DPLL3 */
-/* Source clock for all interfaces and for some device fclks */
-/* Type: DPLL */
-static const struct dpll_data dpll3_dd = {
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
@@ -350,6 +392,11 @@ static const struct dpll_data dpll3_dd = {
 	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll3_ck = {
@@ -357,6 +404,7 @@ static struct clk dpll3_ck = {
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll3_dd,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -439,7 +487,7 @@ static struct clk core_ck = {
 	.name		= "core_ck",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= core_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -456,7 +504,7 @@ static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -503,7 +551,7 @@ static struct clk emu_core_alwon_ck = {
 	.parent		= &dpll3_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -513,22 +561,33 @@ static struct clk emu_core_alwon_ck = {
 /* DPLL4 */
 /* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
 /* Type: DPLL */
-static const struct dpll_data dpll4_dd = {
+static struct dpll_data dpll4_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_bit	= OMAP3430_ST_PERIPH_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll4_ck = {
 	.name		= "dpll4_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -584,7 +643,7 @@ static struct clk omap_96m_alwon_fck = {
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= omap_96m_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				 PARENT_CONTROLS_CLOCK,
@@ -610,7 +669,7 @@ static struct clk cm_96m_fck = {
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cm_96m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -652,7 +711,7 @@ static struct clk virt_omap_54m_fck = {
 	.parent		= &dpll4_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= virt_omap_54m_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
 				PARENT_CONTROLS_CLOCK,
@@ -804,23 +863,33 @@ static struct clk emu_per_alwon_ck = {
 /* Supplies 120MHz clock, USIM source clock */
 /* Type: DPLL */
 /* 3430ES2 only */
-static const struct dpll_data dpll5_dd = {
+static struct dpll_data dpll5_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
 	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
 	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
 	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
 	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.idlest_bit	= OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll5_ck = {
 	.name		= "dpll5_ck",
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -1365,7 +1434,8 @@ static const struct clksel mcbsp_15_clksel[] = {
 };
 
 static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
+	.name		= "mcbsp_fck",
+	.id		= 5,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
@@ -1377,7 +1447,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
+	.name		= "mcbsp_fck",
+	.id		= 1,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
@@ -1789,7 +1860,8 @@ static struct clk gpt10_ick = {
 };
 
 static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
+	.name		= "mcbsp_ick",
+	.id		= 5,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
@@ -1798,7 +1870,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
+	.name		= "mcbsp_ick",
+	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
@@ -1935,7 +2008,7 @@ static struct clk dss1_alwon_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= dss1_alwon_fck_clksel,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
@@ -1991,7 +2064,7 @@ static struct clk cam_mclk = {
 	.parent		= &dpll4_m5x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
@@ -2541,7 +2614,8 @@ static struct clk gpt2_ick = {
 };
 
 static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
+	.name		= "mcbsp_ick",
+	.id		= 2,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
@@ -2550,7 +2624,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
+	.name		= "mcbsp_ick",
+	.id		= 3,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
@@ -2559,7 +2634,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
+	.name		= "mcbsp_ick",
+	.id		= 4,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
@@ -2574,7 +2650,8 @@ static const struct clksel mcbsp_234_clksel[] = {
 };
 
 static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
+	.name		= "mcbsp_fck",
+	.id		= 2,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
@@ -2586,7 +2663,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
+	.name		= "mcbsp_fck",
+	.id		= 3,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
@@ -2598,7 +2676,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
+	.name		= "mcbsp_fck",
+	.id		= 4,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 3c38395f644..ee4c0ca1a70 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -72,7 +72,8 @@
 #define OMAP3430_ST_IVA2				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK				(1 << 0)
+#define OMAP3430_ST_IVA2_CLK_SHIFT			0
+#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
 
 /* CM_AUTOIDLE_PLL_IVA2 */
 #define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
@@ -115,10 +116,7 @@
 #define OMAP3430_ST_MPU					(1 << 0)
 
 /* CM_IDLEST_PLL_MPU */
-#define OMAP3430_ST_MPU_CLK				(1 << 0)
-#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_SHIFT			0
 #define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
 
 /* CM_AUTOIDLE_PLL_MPU */
@@ -408,8 +406,10 @@
 #define OMAP3430_ST_12M_CLK				(1 << 4)
 #define OMAP3430_ST_48M_CLK				(1 << 3)
 #define OMAP3430_ST_96M_CLK				(1 << 2)
-#define OMAP3430_ST_PERIPH_CLK				(1 << 1)
-#define OMAP3430_ST_CORE_CLK				(1 << 0)
+#define OMAP3430_ST_PERIPH_CLK_SHIFT			1
+#define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
+#define OMAP3430_ST_CORE_CLK_SHIFT			0
+#define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
 
 /* CM_IDLEST2_CKGEN */
 #define OMAP3430ES2_ST_120M_CLK_SHIFT			1
@@ -423,6 +423,10 @@
 #define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
 #define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
 
+/* CM_AUTOIDLE2_PLL */
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT		0
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK		(0x7 << 0)
+
 /* CM_CLKSEL1_PLL */
 /* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 8489f3029fe..87a44c715aa 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -81,6 +81,7 @@
 #define OMAP3430ES2_CM_FCLKEN3				0x0008
 #define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
 #define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
 #define OMAP3430_CM_CLKSEL1				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
@@ -96,15 +97,21 @@
 /* Clock management domain register get/set */
 
 #ifndef __ASSEMBLER__
-static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+
+extern u32 cm_read_mod_reg(s16 module, u16 idx);
+extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
+static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	__raw_writel(val, OMAP_CM_REGADDR(module, idx));
+	return cm_rmw_mod_reg_bits(bits, bits, module, idx);
 }
 
-static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	return __raw_readl(OMAP_CM_REGADDR(module, idx));
+	return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
+
 #endif
 
 /* CM register bits shared between 24XX and 3430 */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a5d86a49c21..51f70300996 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -13,22 +13,21 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
-
+#include <asm/arch/common.h>
 #include <asm/arch/control.h>
 
-static u32 omap2_ctrl_base;
+static void __iomem *omap2_ctrl_base;
 
-#define OMAP_CTRL_REGADDR(reg)	(void __iomem *)IO_ADDRESS(omap2_ctrl_base \
-								+ (reg))
+#define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 
-void omap_ctrl_base_set(u32 base)
+void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-	omap2_ctrl_base = base;
+	omap2_ctrl_base = omap2_globals->ctrl;
 }
 
-u32 omap_ctrl_base_get(void)
+void __iomem *omap_ctrl_base_get(void)
 {
 	return omap2_ctrl_base;
 }
@@ -50,25 +49,16 @@ u32 omap_ctrl_readl(u16 offset)
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
-		 (u32)OMAP_CTRL_REGADDR(offset));
-
 	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
-		 (u32)OMAP_CTRL_REGADDR(offset));
-
 	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
-		 (u32)OMAP_CTRL_REGADDR(offset));
-
 	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 4dfd878d796..dff4b16cead 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,16 +17,23 @@
 
 #include <asm/io.h>
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#define OMAP24XX_TAP_BASE	io_p2v(0x48014000)
-#endif
+#include <asm/arch/control.h>
+#include <asm/arch/cpu.h>
 
-#if defined(CONFIG_ARCH_OMAP2430)
-#define OMAP24XX_TAP_BASE	io_p2v(0x4900A000)
+#if defined(CONFIG_ARCH_OMAP2420)
+#define TAP_BASE	io_p2v(0x48014000)
+#elif defined(CONFIG_ARCH_OMAP2430)
+#define TAP_BASE	io_p2v(0x4900A000)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define TAP_BASE	io_p2v(0x4830A000)
 #endif
 
 #define OMAP_TAP_IDCODE		0x0204
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP_TAP_PROD_ID	0x0210
+#else
 #define OMAP_TAP_PROD_ID	0x0208
+#endif
 
 #define OMAP_TAP_DIE_ID_0	0x0218
 #define OMAP_TAP_DIE_ID_1	0x021C
@@ -56,9 +63,134 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
 };
 
+static struct omap_chip_id omap_chip;
+
+/**
+ * omap_chip_is - test whether currently running OMAP matches a chip type
+ * @oc: omap_chip_t to test against
+ *
+ * Test whether the currently-running OMAP chip matches the supplied
+ * chip type 'oc'.  Returns 1 upon a match; 0 upon failure.
+ */
+int omap_chip_is(struct omap_chip_id oci)
+{
+	return (oci.oc & omap_chip.oc) ? 1 : 0;
+}
+EXPORT_SYMBOL(omap_chip_is);
+
 static u32 __init read_tap_reg(int reg)
 {
-	return __raw_readl(OMAP24XX_TAP_BASE + reg);
+	unsigned int regval = 0;
+	u32 cpuid;
+
+	/* Reading the IDCODE register on 3430 ES1 results in a
+	 * data abort as the register is not exposed on the OCP
+	 * Hence reading the Cortex Rev
+	 */
+	cpuid = read_cpuid(CPUID_ID);
+
+	/* If the processor type is Cortex-A8 and the revision is 0x0
+	 * it means its Cortex r0p0 which is 3430 ES1
+	 */
+	if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+		switch (reg) {
+		case OMAP_TAP_IDCODE  : regval = 0x0B7AE02F; break;
+		/* Making DevType as 0xF in ES1 to differ from ES2 */
+		case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
+		case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
+		case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
+		case OMAP_TAP_DIE_ID_2:	regval = 0x00000000; break;
+		case OMAP_TAP_DIE_ID_3:	regval = 0x2d2c0000; break;
+		}
+	} else
+		regval = __raw_readl(TAP_BASE + reg);
+
+	return regval;
+
+}
+
+/*
+ * _set_system_rev - set the system_rev global based on current OMAP chip type
+ *
+ * Set the system_rev global.  This is primarily used by the cpu_is_omapxxxx()
+ * macros.
+ */
+static void __init _set_system_rev(u32 type, u8 rev)
+{
+	u32 i, ctrl_status;
+
+	/*
+	 * system_rev encoding is as follows
+	 * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
+	 * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
+	 * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
+	 * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
+	 * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
+	 * system_rev & 0x000000c0 -> IDCODE revision[6:7]
+	 * system_rev & 0x0000003f -> sys_boot[0:5]
+	 */
+	/* Embedding the ES revision info in type field */
+	system_rev = type;
+	/* Also add IDCODE revision info only two lower bits */
+	system_rev |= ((rev & 0x3) << 6);
+
+	/* Add in the device type and sys_boot fields (see above) */
+	if (cpu_is_omap24xx()) {
+		i = OMAP24XX_CONTROL_STATUS;
+	} else if (cpu_is_omap343x()) {
+		i = OMAP343X_CONTROL_STATUS;
+	} else {
+		printk(KERN_ERR "id: unknown CPU type\n");
+		BUG();
+	}
+	ctrl_status = omap_ctrl_readl(i);
+	system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
+				      OMAP2_SYSBOOT_4_MASK |
+				      OMAP2_SYSBOOT_3_MASK |
+				      OMAP2_SYSBOOT_2_MASK |
+				      OMAP2_SYSBOOT_1_MASK |
+				      OMAP2_SYSBOOT_0_MASK));
+	system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
+}
+
+
+/*
+ * _set_omap_chip - set the omap_chip global based on OMAP chip type
+ *
+ * Build the omap_chip bits.  This variable is used by powerdomain and
+ * clockdomain code to indicate whether structures are applicable for
+ * the current OMAP chip type by ANDing it against a 'platform' bitfield
+ * in the structure.
+ */
+static void __init _set_omap_chip(void)
+{
+	if (cpu_is_omap343x()) {
+
+		omap_chip.oc = CHIP_IS_OMAP3430;
+		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
+			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+		else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+
+	} else if (cpu_is_omap243x()) {
+
+		/* Currently only supports 2430ES2.1 and 2430-all */
+		omap_chip.oc |= CHIP_IS_OMAP2430;
+
+	} else if (cpu_is_omap242x()) {
+
+		/* Currently only supports 2420ES2.1.1 and 2420-all */
+		omap_chip.oc |= CHIP_IS_OMAP2420;
+
+	} else {
+
+		/* Current CPU not supported by this code. */
+		printk(KERN_WARNING "OMAP chip type code does not yet support "
+		       "this CPU type.\n");
+		WARN_ON(1);
+
+	}
+
 }
 
 void __init omap2_check_revision(void)
@@ -76,21 +208,31 @@ void __init omap2_check_revision(void)
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
-		idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_0));
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_1),
-	       (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_2));
-	printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
-		read_tap_reg(OMAP_TAP_DIE_ID_3));
-	printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
-		prod_id, dev_type);
-#endif
+	pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+		 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_0));
+	pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_1),
+		 (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_2));
+	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
+		 read_tap_reg(OMAP_TAP_DIE_ID_3));
+	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+		 prod_id, dev_type);
+
+	/*
+	 * Detection for 34xx ES2.0 and above can be done with just
+	 * hawkeye and rev. See TRM 1.5.2 Device Identification.
+	 * Note that rev cannot be used directly as ES1.0 uses value 0.
+	 */
+	if (hawkeye == 0xb7ae) {
+		system_rev = 0x34300000 | ((1 + rev) << 12);
+		pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
+		_set_omap_chip();
+		return;
+	}
 
 	/* Check hawkeye ids */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
@@ -114,16 +256,15 @@ void __init omap2_check_revision(void)
 				omap_ids[i].type >> 16);
 		j = i;
 	}
-	system_rev = omap_ids[j].type;
 
-	system_rev |= rev << 8;
+	_set_system_rev(omap_ids[j].type, rev);
 
-	/* Add the cpu class info (24xx) */
-	system_rev |= 0x24;
+	_set_omap_chip();
 
 	pr_info("OMAP%04x", system_rev >> 16);
 	if ((system_rev >> 8) & 0x0f)
-		printk("%x", (system_rev >> 8) & 0x0f);
-	printk("\n");
+		pr_info("ES%x", (system_rev >> 12) & 0xf);
+	pr_info("\n");
+
 }
 
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
new file mode 100644
index 00000000000..17cf199d113
--- /dev/null
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/arm/mach-omap2/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+
+struct mcbsp_internal_clk {
+	struct clk clk;
+	struct clk **childs;
+	int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+	const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
+	int i;
+
+	mclk->n_childs = ARRAY_SIZE(clk_names);
+	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+				GFP_KERNEL);
+
+	for (i = 0; i < mclk->n_childs; i++) {
+		/* We fake a platform device to get correct device id */
+		struct platform_device pdev;
+
+		pdev.dev.bus = &platform_bus_type;
+		pdev.id = mclk->clk.id;
+		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+		if (IS_ERR(mclk->childs[i]))
+			printk(KERN_ERR "Could not get clock %s (%d).\n",
+				clk_names[i], mclk->clk.id);
+	}
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+	struct mcbsp_internal_clk *mclk = container_of(clk,
+					struct mcbsp_internal_clk, clk);
+	int i;
+
+	for (i = 0; i < mclk->n_childs; i++)
+		clk_enable(mclk->childs[i]);
+	return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+	struct mcbsp_internal_clk *mclk = container_of(clk,
+					struct mcbsp_internal_clk, clk);
+	int i;
+
+	for (i = 0; i < mclk->n_childs; i++)
+		clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+	{
+		.clk = {
+			.name 		= "mcbsp_clk",
+			.id		= 1,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name 		= "mcbsp_clk",
+			.id		= 2,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+};
+
+#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size	0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct clk *clk)
+{ }
+#endif
+
+static void omap2_mcbsp2_mux_setup(void)
+{
+	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+	omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+	omap_cfg_reg(W15_24XX_MCBSP2_DR);
+	omap_cfg_reg(V15_24XX_MCBSP2_DX);
+	omap_cfg_reg(V14_24XX_GPIO117);
+	/*
+	 * TODO: Need to add MUX settings for OMAP 2430 SDP
+	 */
+}
+
+static void omap2_mcbsp_request(unsigned int id)
+{
+	if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
+		omap2_mcbsp2_mux_setup();
+}
+
+static int omap2_mcbsp_check(unsigned int id)
+{
+	if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+		printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static struct omap_mcbsp_ops omap2_mcbsp_ops = {
+	.request	= omap2_mcbsp_request,
+	.check		= omap2_mcbsp_check,
+};
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+	{
+		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
+		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
+		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP24XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#else
+#define omap24xx_mcbsp_pdata		NULL
+#define OMAP24XX_MCBSP_PDATA_SZ		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
+	{
+		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
+		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
+		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#else
+#define omap34xx_mcbsp_pdata		NULL
+#define OMAP34XX_MCBSP_PDATA_SZ		0
+#endif
+
+int __init omap2_mcbsp_init(void)
+{
+	int i;
+
+	for (i = 0; i < omap_mcbsp_clks_size; i++) {
+		/* Once we call clk_get inside init, we do not register it */
+		omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+		clk_register(&omap_mcbsp_clks[i].clk);
+	}
+
+	if (cpu_is_omap24xx())
+		omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
+						OMAP24XX_MCBSP_PDATA_SZ);
+
+	if (cpu_is_omap34xx())
+		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
+						OMAP34XX_MCBSP_PDATA_SZ);
+
+	return omap_mcbsp_init();
+}
+arch_initcall(omap2_mcbsp_init);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 12479081881..73cadb2c75c 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,6 +24,7 @@
 
 #include <asm/io.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 
@@ -32,8 +33,8 @@
 #include "memory.h"
 #include "sdrc.h"
 
-unsigned long omap2_sdrc_base;
-unsigned long omap2_sms_base;
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
 
 static struct memory_timings mem_timings;
 static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
@@ -154,6 +155,12 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
 
+void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
+{
+	omap2_sdrc_base = omap2_globals->sdrc;
+	omap2_sms_base = omap2_globals->sms;
+}
+
 /* turn on smart idle modes for SDRAM scheduler and controller */
 void __init omap2_init_memory(void)
 {
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 930770012a7..8f98b20f30a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -236,7 +236,7 @@ void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
 	warn = (orig != reg);
 	if (debug || warn)
 		printk(KERN_WARNING
-			"MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+			"MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
 			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
 			orig, reg);
 }
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index aad781dcf1b..d6c9de82ca0 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -57,13 +57,6 @@ void omap2_pm_idle(void)
 		return;
 	}
 
-	/*
-	 * Since an interrupt may set up a timer, we don't want to
-	 * reprogram the hardware timer with interrupts enabled.
-	 * Re-enable interrupts only after returning from idle.
-	 */
-	timer_dyn_reprogram();
-
 	omap2_sram_idle();
 	local_fiq_enable();
 	local_irq_enable();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cacb34086e3..54c32f48213 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -32,6 +32,7 @@
 
 
 /* Chip-specific module offsets */
+#define OMAP24XX_GR_MOD					OCP_MOD
 #define OMAP24XX_DSP_MOD				0x800
 
 #define OMAP2430_MDM_MOD				0xc00
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index b12f423b859..fd92a80f38f 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -16,16 +16,21 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
 
+#include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 
-extern void omap2_clk_prepare_for_reboot(void);
+static void __iomem *prm_base;
+static void __iomem *cm_base;
 
 u32 omap_prcm_get_reset_sources(void)
 {
+	/* XXX This presumably needs modification for 34XX */
 	return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
@@ -33,11 +38,90 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
-	u32 wkup;
+	s16 prcm_offs;
 	omap2_clk_prepare_for_reboot();
 
-	if (cpu_is_omap24xx()) {
-		wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
-		prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
-	}
+	if (cpu_is_omap24xx())
+		prcm_offs = WKUP_MOD;
+	else if (cpu_is_omap34xx())
+		prcm_offs = OMAP3430_GR_MOD;
+	else
+		WARN_ON(1);
+
+	prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
+}
+
+static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
+{
+	BUG_ON(!base);
+	return __raw_readl(base + module + reg);
+}
+
+static inline void __omap_prcm_write(u32 value, void __iomem *base,
+						s16 module, u16 reg)
+{
+	BUG_ON(!base);
+	__raw_writel(value, base + module + reg);
+}
+
+/* Read a register in a PRM module */
+u32 prm_read_mod_reg(s16 module, u16 idx)
+{
+	return __omap_prcm_read(prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_read_mod_reg);
+
+/* Write into a register in a PRM module */
+void prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__omap_prcm_write(val, prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_write_mod_reg);
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+	u32 v;
+
+	v = prm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	prm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+EXPORT_SYMBOL(prm_rmw_mod_reg_bits);
+
+/* Read a register in a CM module */
+u32 cm_read_mod_reg(s16 module, u16 idx)
+{
+	return __omap_prcm_read(cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_read_mod_reg);
+
+/* Write into a register in a CM module */
+void cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__omap_prcm_write(val, cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_write_mod_reg);
+
+/* Read-modify-write a register in a CM module. Caller must lock */
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+	u32 v;
+
+	v = cm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	cm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+
+void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
+{
+	prm_base = omap2_globals->prm;
+	cm_base = omap2_globals->cm;
 }
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 618f8111658..bbf41fc8e9a 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -38,13 +38,29 @@
  *
  */
 
+/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
+#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
+#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+
+/* 242x GR_MOD registers, use these only for assembly code */
+#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* 243x GR_MOD registers, use these only for assembly code */
+#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
+						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* These will disappear */
 #define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
 #define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
 
 #define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
 #define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
 
-#define OMAP24XX_PRCM_VOLTCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
 #define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
 #define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
 #define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
@@ -150,15 +166,19 @@
 #ifndef __ASSEMBLER__
 
 /* Power/reset management domain register get/set */
+extern u32 prm_read_mod_reg(s16 module, u16 idx);
+extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
-static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+/* Read-modify-write bits in a PRM register (by domain) */
+static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	__raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+	return prm_rmw_mod_reg_bits(bits, bits, module, idx);
 }
 
-static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-	return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+	return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index d7f23bc9550..1b1fe4f6e03 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -18,13 +18,11 @@
 #include <asm/arch/sdrc.h>
 
 #ifndef __ASSEMBLER__
-extern unsigned long omap2_sdrc_base;
-extern unsigned long omap2_sms_base;
+extern void __iomem *omap2_sdrc_base;
+extern void __iomem *omap2_sms_base;
 
-#define OMAP_SDRC_REGADDR(reg)						\
-		(void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
-#define OMAP_SMS_REGADDR(reg)						\
-		(void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+#define OMAP_SDRC_REGADDR(reg)			(omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg)			(omap2_sms_base + (reg))
 
 /* SDRC global register get/set */
 
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram242x.S
index 4a9e4914071..4c274510f3e 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/sram-fn.S
+ * linux/arch/arm/mach-omap2/sram242x.S
  *
  * Omap2 specific functions that need to be run in internal SRAM
  *
@@ -27,22 +27,20 @@
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
 
-#include "sdrc.h"
 #include "prm.h"
 #include "cm.h"
-
-#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+#include "sdrc.h"
 
 	.text
 
-ENTRY(sram_ddr_init)
+ENTRY(omap242x_sram_ddr_init)
 	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
 
 	mov	r12, r2			@ capture CS1 vs CS0
 	mov	r8, r3			@ capture force parameter
 
 	/* frequency shift down */
-	ldr	r2, cm_clksel2_pll	@ get address of dpllout reg
+	ldr	r2, omap242x_sdi_cm_clksel2_pll	@ get address of dpllout reg
 	mov	r3, #0x1		@ value for 1x operation
 	str	r3, [r2]		@ go to L1-freq operation
 
@@ -51,7 +49,7 @@ ENTRY(sram_ddr_init)
 	bl voltage_shift		@ go drop voltage
 
 	/* dll lock mode */
-	ldr	r11, sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r11, omap242x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
 	ldr	r10, [r11]		@ get current val
 	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
 	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
@@ -102,7 +100,7 @@ i_dll_delay:
 	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
 	 */
 voltage_shift:
-	ldr	r4, prcm_voltctrl	@ get addr of volt ctrl.
+	ldr	r4, omap242x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
 	ldr	r5, [r4]		@ get value.
 	ldr	r6, prcm_mask_val	@ get value of mask
 	and	r5, r5, r6		@ apply mask to clear bits
@@ -112,7 +110,7 @@ voltage_shift:
 	orr	r5, r5, r3		@ build value for force
 	str	r5, [r4]		@ Force transition to L1
 
-	ldr	r3, timer_32ksynct_cr	@ get addr of counter
+	ldr	r3, omap242x_sdi_timer_32ksynct_cr	@ get addr of counter
 	ldr	r5, [r3]		@ get value
 	add	r5, r5, #0x3		@ give it at most 93uS
 volt_delay:
@@ -121,32 +119,31 @@ volt_delay:
 	bhi	volt_delay		@ not yet->branch
 	mov	pc, lr			@ back to caller.
 
-/* relative load constants */
-cm_clksel2_pll:
+omap242x_sdi_cm_clksel2_pll:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-sdrc_dlla_ctrl:
+omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-prcm_voltctrl:
-	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_sdi_prcm_voltctrl:
+	.word OMAP242X_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
-timer_32ksynct_cr:
-	.word TIMER_32KSYNCT_CR_V
-ENTRY(sram_ddr_init_sz)
-	.word	. - sram_ddr_init
+omap242x_sdi_timer_32ksynct_cr:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap242x_sram_ddr_init_sz)
+	.word	. - omap242x_sram_ddr_init
 
 /*
  * Reprograms memory timings.
  * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
  * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
  */
-ENTRY(sram_reprogram_sdrc)
+ENTRY(omap242x_sram_reprogram_sdrc)
 	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
 	mov	r3, #0x0		@ clear for mrc call
 	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
 	nop
 	nop
-	ldr	r6, ddr_sdrc_rfr_ctrl	@ get addr of refresh reg
+	ldr	r6, omap242x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
 	ldr	r5, [r6]		@ get value
 	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
 
@@ -160,7 +157,7 @@ ENTRY(sram_reprogram_sdrc)
 	movne	r5, r5, lsl #1		@ mult by 2 if to full
 	mov	r5, r5, lsl #8		@ put rfr field back into place
 	add	r5, r5, #0x1		@ turn on burst of 1
-	ldr	r4, ddr_cm_clksel2_pll	@ get address of out reg
+	ldr	r4, omap242x_srs_cm_clksel2_pll	@ get address of out reg
 	ldr	r3, [r4]		@ get curr value
 	orr	r3, r3, #0x3
 	bic	r3, r3, #0x3		@ clear lower bits
@@ -181,7 +178,7 @@ ENTRY(sram_reprogram_sdrc)
 	bne	freq_out		@ leave if SDR, no DLL function
 
 	/* With DDR, we need to take care of the DLL for the frequency change */
-	ldr	r2, ddr_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r2, omap242x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
 	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
 	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
 	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
@@ -197,7 +194,7 @@ freq_out:
      *	wait for it to finish, use 32k sync counter, 1tick=31uS.
      */
 voltage_shift_c:
-	ldr	r10, ddr_prcm_voltctrl	@ get addr of volt ctrl
+	ldr	r10, omap242x_srs_prcm_voltctrl	@ get addr of volt ctrl
 	ldr	r8, [r10]		@ get value
 	ldr	r7, ddr_prcm_mask_val	@ get value of mask
 	and	r8, r8, r7		@ apply mask to clear bits
@@ -207,7 +204,7 @@ voltage_shift_c:
 	orr	r8, r8, r7		@ build value for force
 	str	r8, [r10]		@ Force transition to L1
 
-	ldr	r10, ddr_timer_32ksynct	@ get addr of counter
+	ldr	r10, omap242x_srs_timer_32ksynct	@ get addr of counter
 	ldr	r8, [r10]		@ get value
 	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
 volt_delay_c:
@@ -216,39 +213,39 @@ volt_delay_c:
 	bhi	volt_delay_c		@ not yet->branch
 	mov	pc, lr			@ back to caller
 
-ddr_cm_clksel2_pll:
+omap242x_srs_cm_clksel2_pll:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-ddr_sdrc_dlla_ctrl:
+omap242x_srs_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ddr_sdrc_rfr_ctrl:
+omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-ddr_prcm_voltctrl:
-	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_srs_prcm_voltctrl:
+	.word OMAP242X_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
-ddr_timer_32ksynct:
-	.word TIMER_32KSYNCT_CR_V
+omap242x_srs_timer_32ksynct:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
 
-ENTRY(sram_reprogram_sdrc_sz)
-	.word	. - sram_reprogram_sdrc
+ENTRY(omap242x_sram_reprogram_sdrc_sz)
+	.word	. - omap242x_sram_reprogram_sdrc
 
 /*
  * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
  */
-ENTRY(sram_set_prcm)
+ENTRY(omap242x_sram_set_prcm)
 	stmfd	sp!, {r0-r12, lr}	@ regs to stack
 	adr	r4, pbegin		@ addr of preload start
 	adr	r8, pend		@ addr of preload end
 	mcrr	p15, 1, r8, r4, c12	@ preload into icache
 pbegin:
 	/* move into fast relock bypass */
-	ldr	r8, pll_ctl		@ get addr
+	ldr	r8, omap242x_ssp_pll_ctl	@ get addr
 	ldr	r5, [r8]		@ get val
 	mvn	r6, #0x3		@ clear mask
 	and	r5, r5, r6		@ clear field
 	orr	r7, r5, #0x2		@ fast relock val
 	str	r7, [r8]		@ go to fast relock
-	ldr	r4, pll_stat		@ addr of stat
+	ldr	r4, omap242x_ssp_pll_stat	@ addr of stat
 block:
 	/* wait for bypass */
 	ldr	r8, [r4]		@ stat value
@@ -257,10 +254,10 @@ block:
 	bne	block			@ loop if not
 
 	/* set new dpll dividers _after_ in bypass */
-	ldr	r4, pll_div		@ get addr
+	ldr	r4, omap242x_ssp_pll_div	@ get addr
 	str	r0, [r4]		@ set dpll ctrl val
 
-	ldr	r4, set_config		@ get addr
+	ldr	r4, omap242x_ssp_set_config	@ get addr
 	mov	r8, #1			@ valid cfg msk
 	str	r8, [r4]		@ make dividers take
 
@@ -274,8 +271,8 @@ wait_a_bit:
 	beq	pend			@ jump over dpll relock
 
 	/* relock DPLL with new vals */
-	ldr	r5, pll_stat		@ get addr
-	ldr	r4, pll_ctl		@ get addr
+	ldr	r5, omap242x_ssp_pll_stat	@ get addr
+	ldr	r4, omap242x_ssp_pll_ctl	@ get addr
 	orr	r8, r7, #0x3		@ val for lock dpll
 	str	r8, [r4]		@ set val
 	mov	r0, #1000		@ dead spin a bit
@@ -289,9 +286,9 @@ wait_lock:
 	bne	wait_lock		@ wait if not
 pend:
 	/* update memory timings & briefly lock dll */
-	ldr	r4, sdrc_rfr		@ get addr
+	ldr	r4, omap242x_ssp_sdrc_rfr	@ get addr
 	str	r1, [r4]		@ update refresh timing
-	ldr	r11, dlla_ctrl		@ get addr of DLLA ctrl
+	ldr	r11, omap242x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
 	ldr	r10, [r11]		@ get current val
 	mvn	r9, #0x4		@ mask to get clear bit2
 	and	r10, r10, r9		@ clear bit2 for lock mode
@@ -307,18 +304,18 @@ wait_dll_lock:
 	nop
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
-set_config:
-	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
-pll_ctl:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
-pll_stat:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
-pll_div:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
-sdrc_rfr:
+omap242x_ssp_set_config:
+	.word OMAP242X_PRCM_CLKCFG_CTRL
+omap242x_ssp_pll_ctl:
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap242x_ssp_pll_stat:
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap242x_ssp_pll_div:
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap242x_ssp_sdrc_rfr:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-dlla_ctrl:
+omap242x_ssp_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
-ENTRY(sram_set_prcm_sz)
-	.word	. - sram_set_prcm
+ENTRY(omap242x_sram_set_prcm_sz)
+	.word	. - omap242x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
new file mode 100644
index 00000000000..a3fa48dc08c
--- /dev/null
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -0,0 +1,321 @@
+/*
+ * linux/arch/arm/mach-omap2/sram243x.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "sdrc.h"
+
+	.text
+
+ENTRY(omap243x_sram_ddr_init)
+	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
+
+	mov	r12, r2			@ capture CS1 vs CS0
+	mov	r8, r3			@ capture force parameter
+
+	/* frequency shift down */
+	ldr	r2, omap243x_sdi_cm_clksel2_pll	@ get address of dpllout reg
+	mov	r3, #0x1		@ value for 1x operation
+	str	r3, [r2]		@ go to L1-freq operation
+
+	/* voltage shift down */
+	mov r9, #0x1			@ set up for L1 voltage call
+	bl voltage_shift		@ go drop voltage
+
+	/* dll lock mode */
+	ldr	r11, omap243x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	ldr	r10, [r11]		@ get current val
+	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
+	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode.
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	bl	i_dll_wait		@ wait for dll to lock
+
+	/* get dll value */
+	add	r11, r11, #0x4		@ get addr of status reg
+	ldr	r10, [r11]		@ get locked value
+
+	/* voltage shift up */
+	mov r9, #0x0			@ shift back to L0-voltage
+	bl voltage_shift		@ go raise voltage
+
+	/* frequency shift up */
+	mov	r3, #0x2		@ value for 2x operation
+	str	r3, [r2]		@ go to L0-freq operation
+
+	/* reset entry mode for dllctrl */
+	sub	r11, r11, #0x4		@ move from status to ctrl
+	cmp	r12, #0x1		@ normalize if cs1 based
+	subeq	r11, r11, #0x8		@ possibly back to DLLA
+	cmp	r8, #0x1		@ if forced unlock exit
+	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
+	str	r1, [r11]		@ restore DLLA_CTRL high value
+	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
+	str	r1, [r11]		@ set value DLLB_CTRL
+	bl	i_dll_wait		@ wait for possible lock
+
+	/* set up for return, DDR should be good */
+	str r10, [r0]			@ write dll_status and return counter
+	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
+
+	/* ensure the DLL has relocked */
+i_dll_wait:
+	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+	subs	r4, r4, #0x1
+	bne	i_dll_delay
+	mov	pc, lr
+
+	/*
+	 * shift up or down voltage, use R9 as input to tell level.
+	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
+	 */
+voltage_shift:
+	ldr	r4, omap243x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
+	ldr	r5, [r4]		@ get value.
+	ldr	r6, prcm_mask_val	@ get value of mask
+	and	r5, r5, r6		@ apply mask to clear bits
+	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
+	str	r5, [r4]		@ set up for change.
+	mov	r3, #0x4000		@ get val for force
+	orr	r5, r5, r3		@ build value for force
+	str	r5, [r4]		@ Force transition to L1
+
+	ldr	r3, omap243x_sdi_timer_32ksynct_cr	@ get addr of counter
+	ldr	r5, [r3]		@ get value
+	add	r5, r5, #0x3		@ give it at most 93uS
+volt_delay:
+	ldr	r7, [r3]		@ get timer value
+	cmp	r5, r7			@ time up?
+	bhi	volt_delay		@ not yet->branch
+	mov	pc, lr			@ back to caller.
+
+omap243x_sdi_cm_clksel2_pll:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_sdi_sdrc_dlla_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_sdi_prcm_voltctrl:
+	.word OMAP243X_PRCM_VOLTCTRL
+prcm_mask_val:
+	.word 0xFFFF3FFC
+omap243x_sdi_timer_32ksynct_cr:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap243x_sram_ddr_init_sz)
+	.word	. - omap243x_sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(omap243x_sram_reprogram_sdrc)
+	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
+	mov	r3, #0x0		@ clear for mrc call
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
+	nop
+	nop
+	ldr	r6, omap243x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
+	ldr	r5, [r6]		@ get value
+	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
+
+	cmp	r0, #0x1		@ going to half speed?
+	movne	r9, #0x0		@ if up set flag up for pre up, hi volt
+
+	blne	voltage_shift_c		@ adjust voltage
+
+	cmp	r0, #0x1		@ going to half speed (post branch link)
+	moveq	r5, r5, lsr #1		@ divide by 2 if to half
+	movne	r5, r5, lsl #1		@ mult by 2 if to full
+	mov	r5, r5, lsl #8		@ put rfr field back into place
+	add	r5, r5, #0x1		@ turn on burst of 1
+	ldr	r4, omap243x_srs_cm_clksel2_pll	@ get address of out reg
+	ldr	r3, [r4]		@ get curr value
+	orr	r3, r3, #0x3
+	bic	r3, r3, #0x3		@ clear lower bits
+	orr	r3, r3, r0		@ new state value
+	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
+	nop
+	nop
+
+	moveq	r9, #0x1		@ if speed down, post down, drop volt
+	bleq	voltage_shift_c
+
+	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
+	str	r5, [r6]		@ set new RFR_1 value
+	add	r6, r6, #0x30		@ get RFR_2 addr
+	str	r5, [r6]		@ set RFR_2
+	nop
+	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
+	bne	freq_out		@ leave if SDR, no DLL function
+
+	/* With DDR, we need to take care of the DLL for the frequency change */
+	ldr	r2, omap243x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
+	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
+	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
+	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
+	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+	subs	r1, r1, #0x1
+	bne	dll_wait
+freq_out:
+	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return
+
+    /*
+     * shift up or down voltage, use R9 as input to tell level.
+     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
+     */
+voltage_shift_c:
+	ldr	r10, omap243x_srs_prcm_voltctrl	@ get addr of volt ctrl
+	ldr	r8, [r10]		@ get value
+	ldr	r7, ddr_prcm_mask_val	@ get value of mask
+	and	r8, r8, r7		@ apply mask to clear bits
+	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
+	str	r8, [r10]		@ set up for change.
+	mov	r7, #0x4000		@ get val for force
+	orr	r8, r8, r7		@ build value for force
+	str	r8, [r10]		@ Force transition to L1
+
+	ldr	r10, omap243x_srs_timer_32ksynct	@ get addr of counter
+	ldr	r8, [r10]		@ get value
+	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
+volt_delay_c:
+	ldr	r7, [r10]		@ get timer value
+	cmp	r8, r7			@ time up?
+	bhi	volt_delay_c		@ not yet->branch
+	mov	pc, lr			@ back to caller
+
+omap243x_srs_cm_clksel2_pll:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_srs_sdrc_dlla_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_srs_sdrc_rfr_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_srs_prcm_voltctrl:
+	.word OMAP243X_PRCM_VOLTCTRL
+ddr_prcm_mask_val:
+	.word 0xFFFF3FFC
+omap243x_srs_timer_32ksynct:
+	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+
+ENTRY(omap243x_sram_reprogram_sdrc_sz)
+	.word	. - omap243x_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap243x_sram_set_prcm)
+	stmfd	sp!, {r0-r12, lr}	@ regs to stack
+	adr	r4, pbegin		@ addr of preload start
+	adr	r8, pend		@ addr of preload end
+	mcrr	p15, 1, r8, r4, c12	@ preload into icache
+pbegin:
+	/* move into fast relock bypass */
+	ldr	r8, omap243x_ssp_pll_ctl	@ get addr
+	ldr	r5, [r8]		@ get val
+	mvn	r6, #0x3		@ clear mask
+	and	r5, r5, r6		@ clear field
+	orr	r7, r5, #0x2		@ fast relock val
+	str	r7, [r8]		@ go to fast relock
+	ldr	r4, omap243x_ssp_pll_stat	@ addr of stat
+block:
+	/* wait for bypass */
+	ldr	r8, [r4]		@ stat value
+	and	r8, r8, #0x3		@ mask for stat
+	cmp	r8, #0x1		@ there yet
+	bne	block			@ loop if not
+
+	/* set new dpll dividers _after_ in bypass */
+	ldr	r4, omap243x_ssp_pll_div	@ get addr
+	str	r0, [r4]		@ set dpll ctrl val
+
+	ldr	r4, omap243x_ssp_set_config	@ get addr
+	mov	r8, #1			@ valid cfg msk
+	str	r8, [r4]		@ make dividers take
+
+	mov	r4, #100		@ dead spin a bit
+wait_a_bit:
+	subs	r4, r4, #1		@ dec loop
+	bne	wait_a_bit		@ delay done?
+
+	/* check if staying in bypass */
+	cmp	r2, #0x1		@ stay in bypass?
+	beq	pend			@ jump over dpll relock
+
+	/* relock DPLL with new vals */
+	ldr	r5, omap243x_ssp_pll_stat	@ get addr
+	ldr	r4, omap243x_ssp_pll_ctl	@ get addr
+	orr	r8, r7, #0x3		@ val for lock dpll
+	str	r8, [r4]		@ set val
+	mov	r0, #1000		@ dead spin a bit
+wait_more:
+	subs	r0, r0, #1		@ dec loop
+	bne	wait_more		@ delay done?
+wait_lock:
+	ldr	r8, [r5]		@ get lock val
+	and	r8, r8, #3		@ isolate field
+	cmp	r8, #2			@ locked?
+	bne	wait_lock		@ wait if not
+pend:
+	/* update memory timings & briefly lock dll */
+	ldr	r4, omap243x_ssp_sdrc_rfr	@ get addr
+	str	r1, [r4]		@ update refresh timing
+	ldr	r11, omap243x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
+	ldr	r10, [r11]		@ get current val
+	mvn	r9, #0x4		@ mask to get clear bit2
+	and	r10, r10, r9		@ clear bit2 for lock mode
+	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
+	str	r10, [r11]		@ commit to DLLA_CTRL
+	add	r11, r11, #0x8		@ move to dllb
+	str	r10, [r11]		@ hit DLLB also
+
+	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+	subs	r4, r4, #0x1
+	bne	wait_dll_lock
+	nop
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+
+omap243x_ssp_set_config:
+	.word OMAP243X_PRCM_CLKCFG_CTRL
+omap243x_ssp_pll_ctl:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap243x_ssp_pll_stat:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap243x_ssp_pll_div:
+	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap243x_ssp_sdrc_rfr:
+	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_ssp_dlla_ctrl:
+	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+
+ENTRY(omap243x_sram_set_prcm_sz)
+	.word	. - omap243x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 78d05f203ff..557603f9931 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -59,8 +59,7 @@ static struct irqaction omap2_gp_timer_irq = {
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
-	omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
-	omap_dm_timer_start(gptimer);
+	omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles);
 
 	return 0;
 }
@@ -77,8 +76,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
 
-		omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
-		omap_dm_timer_start(gptimer);
+		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		break;
@@ -172,8 +170,7 @@ static void __init omap2_gp_clocksource_init(void)
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
 	tick_period = (tick_rate / HZ) - 1;
 
-	omap_dm_timer_set_load(gpt, 1, 0);
-	omap_dm_timer_start(gpt);
+	omap_dm_timer_set_load_start(gpt, 1, 0);
 
 	clocksource_gpt.mult =
 		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);