Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is our first set of fixes from arm-soc for 3.11.
   - A handful of build and warning fixes from Arnd
   - A collection of OMAP fixes
   - defconfig updates to make the default configs more useful for real
     use (and testing) out of the box on hardware

  And a couple of other small fixes.  Some of these have been recently
  applied but it's normally how we deal with fixes, with less bake time
  in -next needed"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  arm: multi_v7_defconfig: Tweaks for omap and sunxi
  arm: multi_v7_defconfig: add i.MX options and NFS root
  ARM: omap2: add select of TI_PRIV_EDMA
  ARM: exynos: select PM_GENERIC_DOMAINS only when used
  ARM: ixp4xx: avoid circular header dependency
  ARM: OMAP: omap_common_late_init may be unused
  ARM: sti: move DEBUG_STI_UART into alphabetical order
  ARM: OMAP: build mach-omap code only if needed
  ARM: zynq: use DT_MACHINE_START
  ARM: omap5: omap5 has SCU and TWD
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ...

11 files changed, 122 insertions, 95 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c7b32a966f6..627fa7e41fb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,63 +1,10 @@
 config ARCH_OMAP
 	bool
 
-config ARCH_OMAP2PLUS
-	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_BANDGAP
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
-	select OMAP_DM_TIMER
-	select PINCTRL
-	select PROC_DEVICETREE if PROC_FS
-	select SOC_BUS
-	select SPARSE_IRQ
-	select TI_PRIV_EDMA
-	select USE_OF
-	help
-	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
-
-
-if ARCH_OMAP2PLUS
-
-menu "TI OMAP2/3/4 Specific Features"
-
-config ARCH_OMAP2PLUS_TYPICAL
-	bool "Typical OMAP configuration"
-	default y
-	select AEABI
-	select HIGHMEM
-	select I2C
-	select I2C_OMAP
-	select MENELAUS if ARCH_OMAP2
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
-	select PM_RUNTIME
-	select REGULATOR
-	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
-	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	select VFP
-	help
-	  Compile a kernel suitable for booting most boards
-
-config SOC_HAS_OMAP2_SDRC
-	bool "OMAP2 SDRAM Controller support"
-
-config SOC_HAS_REALTIME_COUNTER
-	bool "Real time free running counter"
-	depends on SOC_OMAP5
-	default y
-
 config ARCH_OMAP2
 	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V6
-	default y
+	select ARCH_OMAP2PLUS
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
@@ -65,9 +12,8 @@ config ARCH_OMAP2
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V7
-	default y
+	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
@@ -81,9 +27,8 @@ config ARCH_OMAP3
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
-	default y
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
@@ -108,12 +53,87 @@ config ARCH_OMAP4
 config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
+	select ARM_ERRATA_798181
+
+config SOC_AM33XX
+	bool "AM33XX support"
+	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
+	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
+	select MULTI_IRQ_HANDLER
+	select COMMON_CLK
+
+config SOC_AM43XX
+	bool "TI AM43x"
+	depends on ARCH_MULTI_V7
+	select CPU_V7
+	select ARCH_OMAP2PLUS
+	select MULTI_IRQ_HANDLER
+	select ARM_GIC
+	select COMMON_CLK
+	select MACH_OMAP_GENERIC
+
+config ARCH_OMAP2PLUS
+	bool
+	select ARCH_HAS_BANDGAP
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select HAVE_CLK
+	select OMAP_DM_TIMER
+	select PINCTRL
+	select PROC_DEVICETREE if PROC_FS
+	select SOC_BUS
+	select SPARSE_IRQ
+	select TI_PRIV_EDMA
+	select USE_OF
+	help
+	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
+
+
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+	bool "Typical OMAP configuration"
+	default y
+	select AEABI
+	select HIGHMEM
+	select I2C
+	select I2C_OMAP
+	select MENELAUS if ARCH_OMAP2
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select PM_RUNTIME
+	select REGULATOR
+	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	select VFP
+	help
+	  Compile a kernel suitable for booting most boards
+
+config SOC_HAS_OMAP2_SDRC
+	bool "OMAP2 SDRAM Controller support"
+
+config SOC_HAS_REALTIME_COUNTER
+	bool "Real time free running counter"
+	depends on SOC_OMAP5
+	default y
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -142,23 +162,6 @@ config SOC_TI81XX
 	depends on ARCH_OMAP3
 	default y
 
-config SOC_AM33XX
-	bool "AM33XX support"
-	depends on ARCH_MULTI_V7
-	default y
-	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
-	select COMMON_CLK
-
-config SOC_AM43XX
-	bool "TI AM43x"
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
-	select ARM_GIC
-	select COMMON_CLK
-	select MACH_OMAP_GENERIC
-
 config OMAP_PACKAGE_ZAF
        bool
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ea5a27ff994..d4f671547c3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -95,10 +95,6 @@ obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
-ifeq ($(CONFIG_PM_VERBOSE),y)
-CFLAGS_pm_bus.o				+= -DDEBUG
-endif
-
 endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index b54562d1235..87e65dde8e1 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -553,6 +553,37 @@ static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* Display Sub System */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
+	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
 	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index bd74f9f6063..bdd1e3a179e 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -61,7 +61,7 @@ static struct omap_dss_board_info rx51_dss_board_info = {
 
 static int __init rx51_video_init(void)
 {
-	if (!machine_is_nokia_rx51())
+	if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
 		return 0;
 
 	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index aef96e45cb2..3c1279f27d1 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -15,7 +15,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
@@ -66,7 +65,7 @@ static int __init omap3_l3_init(void)
 
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+	return PTR_RET(pdev);
 }
 omap_postcore_initcall(omap3_l3_init);
 
@@ -100,7 +99,7 @@ static int __init omap4_l3_init(void)
 
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+	return PTR_RET(pdev);
 }
 omap_postcore_initcall(omap4_l3_init);
 
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 190ae493c6e..2ca33cc0c48 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -83,10 +83,7 @@ static int __init omap_init_vrfb(void)
 	pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
 			res, num_res, NULL, 0);
 
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-	else
-		return 0;
+	return PTR_RET(pdev);
 }
 
 omap_arch_initcall(omap_init_vrfb);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 1c7969e965d..f3fdd6afa21 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1734,7 +1734,7 @@ static int __init omap_gpmc_init(void)
 	pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+	return PTR_RET(pdev);
 }
 omap_postcore_initcall(omap_gpmc_init);
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index fe3253a100e..4a3f06f0285 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -394,7 +394,7 @@ static void __init omap_hwmod_init_postsetup(void)
 	omap_pm_if_early_init();
 }
 
-static void __init omap_common_late_init(void)
+static void __init __maybe_unused omap_common_late_init(void)
 {
 	omap_mux_late_init();
 	omap2_common_pm_late_init();
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 9ace8eae7ee..33c8846b419 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -54,10 +54,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[])
 	WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
 	     dev_name);
 
-	if (IS_ERR(omap_pmu_dev))
-		return PTR_ERR(omap_pmu_dev);
-
-	return 0;
+	return PTR_RET(omap_pmu_dev);
 }
 
 static int __init omap_init_pmu(void)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 88ff83a0942..9086ce03ae1 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -34,6 +34,8 @@ ppa_zero_params:
 ppa_por_params:
 	.word		1, 0
 
+#ifdef CONFIG_ARCH_OMAP4
+
 /*
  * =============================
  * == CPU suspend finisher ==
@@ -326,7 +328,9 @@ skip_l2en:
 
 	b	cpu_resume			@ Jump to generic resume
 ENDPROC(omap4_cpu_resume)
-#endif
+#endif	/* CONFIG_ARCH_OMAP4 */
+
+#endif	/* defined(CONFIG_SMP) && defined(CONFIG_PM) */
 
 #ifndef CONFIG_OMAP4_ERRATA_I688
 ENTRY(omap_bus_sync)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 29ac667b7a8..b37e1fcbad5 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -220,7 +220,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 					 int posted)
 {
 	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
-	const char *oh_name;
+	const char *oh_name = NULL;
 	struct device_node *np;
 	struct omap_hwmod *oh;
 	struct resource irq, mem;