ARM: OMAP: Timer32K: Re-organize duplicated 32k-timer code

On OMAP2/3, the gp-timer code can be used for a 32kHz timer simply by
setting the source to be the 32k clock instead of sys_clk.

This patch uses the mach-omap2/timer-gp.c code for 32kHz timer on
OMAP2, moving the logic into mach-omap2/timer-gp.c, and not using
plat-omap/timer32k.c which, for OMAP2, is redundant with the timer-gp
code.

Also, if CONFIG_OMAP_32K_TIMER is enabled, the gptimer-based
clocksource is not used.  Instead the default 32k sync counter is used
as the clocksource (see the clocksource in plat-omap/common.c.)  This
is important for sleep/suspend so there is a valid counter during
sleep.  Note that the suspend/sleep code needs fixing to check for
overflows of this counter.

In addition, the OMAP2/3 details are removed from timer32k.c leaving
that with only OMAP1 specifics.  A follow-up patch will move it from
plat-omap common code to mach-omap1.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

2 files changed, 138 insertions, 18 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b05b738d31e..ac343ec578c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,9 +4,7 @@
 
 # Common support
 obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
-	 serial.o gpmc.o
-
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+	 serial.o gpmc.o timer-gp.o
 
 # Power Management
 obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 3234deedb94..78d05f203ff 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,11 @@
  *
  * OMAP2 GP timer support.
  *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *         Juha Yrjölä <juha.yrjola@nokia.com>
@@ -25,24 +30,23 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/arch/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
-
-static inline void omap2_gp_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
+static struct clock_event_device clockevent_gpt;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
-	omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	timer_tick();
+	struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
+	struct clock_event_device *evt = &clockevent_gpt;
+
+	omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
 
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -52,20 +56,138 @@ static struct irqaction omap2_gp_timer_irq = {
 	.handler	= omap2_gp_timer_interrupt,
 };
 
-static void __init omap2_gp_timer_init(void)
+static int omap2_gp_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
 {
-	u32 tick_period;
+	omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
+	omap_dm_timer_start(gptimer);
+
+	return 0;
+}
+
+static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 period;
+
+	omap_dm_timer_stop(gptimer);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
+		period -= 1;
+
+		omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
+		omap_dm_timer_start(gptimer);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_gpt = {
+	.name		= "gp timer",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap2_gp_timer_set_next_event,
+	.set_mode	= omap2_gp_timer_set_mode,
+};
+
+static void __init omap2_gp_clockevent_init(void)
+{
+	u32 tick_rate;
 
-	omap_dm_timer_init();
 	gptimer = omap_dm_timer_request_specific(1);
 	BUG_ON(gptimer == NULL);
 
+#if defined(CONFIG_OMAP_32K_TIMER)
+	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+#else
 	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
-	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
-	tick_period -= 1;
+#endif
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
 
+	omap2_gp_timer_irq.dev_id = (void *)gptimer;
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
-	omap2_gp_timer_start(tick_period);
+	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+
+	clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
+				     clockevent_gpt.shift);
+	clockevent_gpt.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
+	clockevent_gpt.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_gpt);
+
+	clockevent_gpt.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_gpt);
+}
+
+#ifdef CONFIG_OMAP_32K_TIMER
+/* 
+ * When 32k-timer is enabled, don't use GPTimer for clocksource
+ * instead, just leave default clocksource which uses the 32k
+ * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ */
+
+static inline void __init omap2_gp_clocksource_init(void) {}
+#else
+/*
+ * clocksource
+ */
+static struct omap_dm_timer *gpt_clocksource;
+static cycle_t clocksource_read_cycles(void)
+{
+	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
+}
+
+static struct clocksource clocksource_gpt = {
+	.name		= "gp timer",
+	.rating		= 300,
+	.read		= clocksource_read_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 24,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/* Setup free-running counter for clocksource */
+static void __init omap2_gp_clocksource_init(void)
+{
+	static struct omap_dm_timer *gpt;
+	u32 tick_rate, tick_period;
+	static char err1[] __initdata = KERN_ERR
+		"%s: failed to request dm-timer\n";
+	static char err2[] __initdata = KERN_ERR
+		"%s: can't register clocksource!\n";
+
+	gpt = omap_dm_timer_request();
+	if (!gpt)
+		printk(err1, clocksource_gpt.name);
+	gpt_clocksource = gpt;
+
+	omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
+	tick_period = (tick_rate / HZ) - 1;
+
+	omap_dm_timer_set_load(gpt, 1, 0);
+	omap_dm_timer_start(gpt);
+
+	clocksource_gpt.mult =
+		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
+	if (clocksource_register(&clocksource_gpt))
+		printk(err2, clocksource_gpt.name);
+}
+#endif
+
+static void __init omap2_gp_timer_init(void)
+{
+	omap_dm_timer_init();
+
+	omap2_gp_clockevent_init();
+	omap2_gp_clocksource_init();
 }
 
 struct sys_timer omap_timer = {