diff options
| author | Olof Johansson <olof@lixom.net> | 2012-12-12 16:10:45 -0800 |
|---|---|---|
| committer | Olof Johansson <olof@lixom.net> | 2012-12-12 16:10:45 -0800 |
| commit | 9c7466b217af784280d9fc841bbd559ef3bf33e9 (patch) | |
| tree | c21ee243e48912201b4041fbf3f9bd9165603bd8 /arch/arm/mach-omap2 | |
| parent | 4a76411ea3f1da9032e031f8fff8894b97d141b2 (diff) | |
| parent | 48d224d1efec98b0b78e511150b4f5752beceb7c (diff) | |
ARM: arm-soc: Merge branch 'next/pm2' into next/pm
Another smaller branch merged into next/pm before pull request.
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm/mach-omap2')
64 files changed, 1533 insertions, 447 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 798f35b8ea5..745401020c2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -5,7 +5,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o + omap_device.o sram.o omap-2-3-common = irq.o hwmod-common = omap_hwmod.o \ @@ -73,6 +73,8 @@ obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o endif # Power Management +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o + ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index acb0a524ff7..4815ea6f8f5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -28,7 +28,6 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 6601754f951..7b201546834 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,7 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 488f86fd0e7..c8e37dc0089 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -44,8 +44,6 @@ #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> - #include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 699caec8f9e..ebbc2adb499 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .timer = &omap3_timer, + .timer = &omap3_gp_timer, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 475e14f0721..f0715a369c4 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -97,6 +97,23 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END + +static const char *omap3_gp_boards_compat[] __initdata = { + "ti,omap3-beagle", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_secure_timer, + .dt_compat = omap3_gp_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 3c1e458f68a..9a3878ec225 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,8 +32,8 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> -#include "debug-devices.h" +#include <linux/omap-dma.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index cea5d529262..0f24cb84ba5 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -579,6 +579,11 @@ static void __init igep_wlan_bt_init(void) } else return; + /* Make sure that the GPIO pins are muxed correctly */ + omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); + err = gpio_request_array(igep_wlan_bt_gpios, ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 140b73094af..c8fde3e5644 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -45,7 +45,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 07005fe40a2..60529e0b3d6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -31,7 +31,7 @@ #include <asm/system_info.h> #include "common.h" -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "gpmc-smc91x.h" #include "board-rx51.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index bf8f74b0ce3..ee1045c0ad6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -24,7 +24,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "common.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index a0ae3c09f97..d8620105c42 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -25,14 +25,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7af224208a2..ae2b35e76dc 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,8 +33,6 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "clock.h" #include "clock2xxx.h" @@ -42,6 +40,7 @@ #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 8e48c6d602e..eb69acf2101 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -21,12 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "sdrc.h" +#include "sram.h" #define CYCLES_PER_MHZ 1000000 diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index b2dfcd77719..058ce3c0873 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -22,8 +22,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "../plat-omap/common.h" - #include "clockdomain.h" #include "cm.h" #include "cm33xx.h" diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 0bab493ec13..40b3b5a8445 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/errno.h> #include "cm2xxx.h" #include "cm3xxx.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index ad856092c06..d246efd9f73 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -63,30 +63,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } + /* + * If a board defines get_pendown_state() function, request the pendown + * GPIO and set the GPIO debounce time. + * If a board does not define the get_pendown_state() function, then + * the ads7846 driver will setup the pendown GPIO itself. + */ + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + gpio_export(gpio_pendown, 0); + } spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); + ads7846_config.gpio_pendown = gpio_pendown; + if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; + board_pdata->gpio_pendown_debounce = gpio_debounce; spi_bi->platform_data = board_pdata; - if (board_pdata->get_pendown_state) - gpio_export(gpio_pendown, 0); - } else { - ads7846_config.gpio_pendown = gpio_pendown; } - if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) - gpio_free(gpio_pendown); - spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index c57eeeac7d1..3bbcde87dea 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -34,8 +34,6 @@ #include <asm/proc-fns.h> -#include "../plat-omap/common.h" - #include "i2c.h" #include "serial.h" @@ -84,6 +82,7 @@ extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_gp_timer; extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; extern struct sys_timer omap5_timer; @@ -280,5 +279,8 @@ struct omap2_hsmmc_info; extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h deleted file mode 100644 index a4edbd2f748..00000000000 --- a/arch/arm/mach-omap2/debug-devices.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d2215e9873a..cafe04660a4 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "iomap.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index b1926cd7046..612b9824987 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,7 +28,7 @@ #include <linux/init.h> #include <linux/device.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "soc.h" #include "omap_hwmod.h" @@ -276,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + d->dev_caps |= HS_CHANNELS_RESERVED; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index e3406dce59b..4a964338992 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,7 +14,6 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> #include "soc.h" diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index be092e8e5d8..fbb9b152cd5 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -107,6 +107,19 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } +static int __init omap_i2c_nr_ports(void) +{ + int ports = 0; + + if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; + return ports; +} + static const char name[] = "omap_i2c"; int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, @@ -119,6 +132,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, struct omap_i2c_bus_platform_data *pdata; struct omap_i2c_dev_attr *dev_attr; + if (bus_id > omap_i2c_nr_ports()) + return -EINVAL; + omap2_i2c_mux_pins(bus_id); l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h index 81dbb992a6b..42b6f2e7d19 100644 --- a/arch/arm/mach-omap2/i2c.h +++ b/arch/arm/mach-omap2/i2c.h @@ -19,7 +19,7 @@ * */ -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #ifndef __MACH_OMAP2_I2C_H #define __MACH_OMAP2_I2C_H diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f1e12150278..45cc7ed4dd5 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -28,6 +28,9 @@ #include "soc.h" #include "control.h" +#define OMAP4_SILICON_TYPE_STANDARD 0x01 +#define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 + static unsigned int omap_revision; static const char *cpu_rev; u32 omap_features; @@ -273,25 +276,11 @@ void __init omap4xxx_check_features(void) { u32 si_type; - if (cpu_is_omap443x()) - omap_features |= OMAP4_HAS_MPU_1GHZ; - + si_type = + (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03; - if (cpu_is_omap446x()) { - si_type = - read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1); - switch ((si_type & (3 << 16)) >> 16) { - case 2: - /* High performance device */ - omap_features |= OMAP4_HAS_MPU_1_5GHZ; - break; - case 1: - default: - /* Standard device */ - omap_features |= OMAP4_HAS_MPU_1_2GHZ; - break; - } - } + if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE) + omap_features = OMAP4_HAS_PERF_SILICON; } void __init ti81xx_check_features(void) diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 4b5cbdfac02..cfaed13d004 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <../mach-omap2/serial.h> +#include <mach/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc59c9f..00000000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h new file mode 100644 index 00000000000..70eda00db7a --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 + +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define ZOOM_PORT_SHIFT 1 + +#define OMAP24XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP2UART1 21 +#define OMAP2UART2 22 +#define OMAP2UART3 23 +#define OMAP3UART1 OMAP2UART1 +#define OMAP3UART2 OMAP2UART2 +#define OMAP3UART3 33 +#define OMAP3UART4 34 /* Only on 36xx */ +#define OMAP4UART1 OMAP2UART1 +#define OMAP4UART2 OMAP2UART2 +#define OMAP4UART3 43 +#define OMAP4UART4 44 +#define TI81XXUART1 81 +#define TI81XXUART2 82 +#define TI81XXUART3 83 +#define AM33XXUART1 84 +#define OMAP5UART3 OMAP4UART3 +#define OMAP5UART4 OMAP4UART4 +#define ZOOM_UART 95 /* Only on zoom2/3 */ + +#ifndef __ASSEMBLER__ + +struct omap_board_data; +struct omap_uart_port_info; + +extern void omap_serial_init(void); +extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); +extern void omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *platform_data); +#endif diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h index 28d1ec0e869..8e3546d3e04 100644 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -23,7 +23,7 @@ #include <asm/memory.h> #include <asm/mach-types.h> -#include <../mach-omap2/serial.h> +#include <mach/serial.h> #define MDR1_MODE_MASK 0x07 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 924bf24693c..2c3fdd65387 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -25,9 +25,7 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/sram.h" +#include <linux/omap-dma.h> #include "omap_hwmod.h" #include "soc.h" @@ -44,6 +42,7 @@ #include "sdrc.h" #include "control.h" #include "serial.h" +#include "sram.h" #include "cm2xxx.h" #include "cm3xxx.h" #include "prm.h" @@ -51,6 +50,10 @@ #include "prcm_mpu44xx.h" #include "prminst44xx.h" #include "cminst44xx.h" +#include "prm2xxx.h" +#include "prm3xxx.h" +#include "prm44xx.h" + /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -361,11 +364,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_common_init_early(void) -{ - omap_init_consistent_dma_size(); -} - static void __init omap_hwmod_init_postsetup(void) { u8 postsetup_state; @@ -392,8 +390,8 @@ void __init omap2420_init_early(void) omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); omap2xxx_check_revision(); + omap2xxx_prm_init(); omap2xxx_cm_init(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -422,8 +420,8 @@ void __init omap2430_init_early(void) omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); omap2xxx_check_revision(); + omap2xxx_prm_init(); omap2xxx_cm_init(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -457,8 +455,8 @@ void __init omap3_init_early(void) omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); omap3xxx_check_revision(); omap3xxx_check_features(); + omap3xxx_prm_init(); omap3xxx_cm_init(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -497,7 +495,6 @@ void __init ti81xx_init_early(void) omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -566,7 +563,6 @@ void __init am33xx_init_early(void) omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); am33xx_voltagedomains_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); @@ -591,7 +587,7 @@ void __init omap4430_init_early(void) omap_cm_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap_common_init_early(); + omap44xx_prm_init(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -623,7 +619,6 @@ void __init omap5_init_early(void) omap_prm_base_init(); omap_cm_base_init(); omap5xxx_check_revision(); - omap_common_init_early(); } #endif diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index bf496510eb5..df49f2a4946 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -21,7 +21,7 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/pm_runtime.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "omap_device.h" diff --git a/arch/arm/mach-omap2/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c new file mode 100644 index 00000000000..6a3be2bebdd --- /dev/null +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -0,0 +1,371 @@ +/* + * omap-pm-noop.c - OMAP power management interface - dummy version + * + * This code implements the OMAP power management interface to + * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for + * debug/demonstration use, as it does nothing but printk() whenever a + * function is called (when DEBUG is defined, below) + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * Paul Walmsley + * + * Interface developed by (in alphabetical order): + * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan + * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff + */ + +#undef DEBUG + +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/platform_device.h> + +#include "omap_device.h" +#include "omap-pm.h" + +static bool off_mode_enabled; +static int dummy_context_loss_counter; + +/* + * Device-driver-originated constraints (via board-*.c files) + */ + +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) +{ + if (!dev || t < -1) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (t == -1) + pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", + dev_name(dev)); + else + pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n", + dev_name(dev), t); + + /* + * For current Linux, this needs to map the MPU to a + * powerdomain, then go through the list of current max lat + * constraints on the MPU and find the smallest. If + * the latency constraint has changed, the code should + * recompute the state to enter for the next powerdomain + * state. + * + * TI CDP code can call constraint_set here. + */ + + return 0; +} + +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) +{ + if (!dev || (agent_id != OCP_INITIATOR_AGENT && + agent_id != OCP_TARGET_AGENT)) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (r == 0) + pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", + dev_name(dev), agent_id); + else + pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n", + dev_name(dev), agent_id, r); + + /* + * This code should model the interconnect and compute the + * required clock frequency, convert that to a VDD2 OPP ID, then + * set the VDD2 OPP appropriately. + * + * TI CDP code can call constraint_set here on the VDD2 OPP. + */ + + return 0; +} + +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t) +{ + if (!req_dev || !dev || t < -1) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (t == -1) + pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", + dev_name(dev)); + else + pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n", + dev_name(dev), t); + + /* + * For current Linux, this needs to map the device to a + * powerdomain, then go through the list of current max lat + * constraints on that powerdomain and find the smallest. If + * the latency constraint has changed, the code should + * recompute the state to enter for the next powerdomain + * state. Conceivably, this code should also determine + * whether to actually disable the device clocks or not, + * depending on how long it takes to re-enable the clocks. + * + * TI CDP code can call constraint_set here. + */ + + return 0; +} + +int omap_pm_set_max_sdma_lat(struct device *dev, long t) +{ + if (!dev || t < -1) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (t == -1) + pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", + dev_name(dev)); + else + pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n", + dev_name(dev), t); + + /* + * For current Linux PM QOS params, this code should scan the + * list of maximum CPU and DMA latencies and select the + * smallest, then set cpu_dma_latency pm_qos_param + * accordingly. + * + * For future Linux PM QOS params, with separate CPU and DMA + * latency params, this code should just set the dma_latency param. + * + * TI CDP code can call constraint_set here. + */ + + return 0; +} + +int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) +{ + if (!dev || !c || r < 0) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (r == 0) + pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n", + dev_name(dev)); + else + pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n", + dev_name(dev), r); + + /* + * Code in a real implementation should keep track of these + * constraints on the clock, and determine the highest minimum + * clock rate. It should iterate over each OPP and determine + * whether the OPP will result in a clock rate that would + * satisfy this constraint (and any other PM constraint in effect + * at that time). Once it finds the lowest-voltage OPP that + * meets those conditions, it should switch to it, or return + * an error if the code is not capable of doing so. + */ + + return 0; +} + +/* + * DSP Bridge-specific constraints + */ + +const struct omap_opp *omap_pm_dsp_get_opp_table(void) +{ + pr_debug("OMAP PM: DSP request for OPP table\n"); + + /* + * Return DSP frequency table here: The final item in the + * array should have .rate = .opp_id = 0. + */ + + return NULL; +} + +void omap_pm_dsp_set_min_opp(u8 opp_id) +{ + if (opp_id == 0) { + WARN_ON(1); + return; + } + + pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id); + + /* + * + * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we + * can just test to see which is higher, the CPU's desired OPP + * ID or the DSP's desired OPP ID, and use whichever is + * highest. + * + * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP + * rate is keyed on MPU speed, not the OPP ID. So we need to + * map the OPP ID to the MPU speed for use with clk_set_rate() + * if it is higher than the current OPP clock rate. + * + */ +} + + +u8 omap_pm_dsp_get_opp(void) +{ + pr_debug("OMAP PM: DSP requests current DSP OPP ID\n"); + + /* + * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock + * + * CDP12.14+: + * Call clk_get_rate() on the OPP custom clock, map that to an + * OPP ID using the tables defined in board-*.c/chip-*.c files. + */ + + return 0; +} + +/* + * CPUFreq-originated constraint + * + * In the future, this should be handled by custom OPP clocktype + * functions. + */ + +struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void) +{ + pr_debug("OMAP PM: CPUFreq request for frequency table\n"); + + /* + * Return CPUFreq frequency table here: loop over + * all VDD1 clkrates, pull out the mpu_ck frequencies, build + * table + */ + + return NULL; +} + +void omap_pm_cpu_set_freq(unsigned long f) +{ + if (f == 0) { + WARN_ON(1); + return; + } + + pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n", + f); + + /* + * For l-o dev tree, determine whether MPU freq or DSP OPP id + * freq is higher. Find the OPP ID corresponding to the + * higher frequency. Call clk_round_rate() and clk_set_rate() + * on the OPP custom clock. + * + * CDP should just be able to set the VDD1 OPP clock rate here. + */ +} + +unsigned long omap_pm_cpu_get_freq(void) +{ + pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n"); + + /* + * Call clk_get_rate() on the mpu_ck. + */ + + return 0; +} + +/** + * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled + * + * Intended for use only by OMAP PM core code to notify this layer + * that off mode has been enabled. + */ +void omap_pm_enable_off_mode(void) +{ + off_mode_enabled = true; +} + +/** + * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled + * + * Intended for use only by OMAP PM core code to notify this layer + * that off mode has been disabled. + */ +void omap_pm_disable_off_mode(void) +{ + off_mode_enabled = false; +} + +/* + * Device context loss tracking + */ + +#ifdef CONFIG_ARCH_OMAP2PLUS + +int omap_pm_get_dev_context_loss_count(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int count; + + if (WARN_ON(!dev)) + return -ENODEV; + + if (dev->pm_domain == &omap_device_pm_domain) { + count = omap_device_get_context_loss_count(pdev); + } else { + WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", + dev_name(dev)); + + count = dummy_context_loss_counter; + + if (off_mode_enabled) { + count++; + /* + * Context loss count has to be a non-negative value. + * Clear the sign bit to get a value range from 0 to + * INT_MAX. + */ + count &= INT_MAX; + dummy_context_loss_counter = count; + } + } + + pr_debug("OMAP PM: context loss count for dev %s = %d\n", + dev_name(dev), count); + + return count; +} + +#else + +int omap_pm_get_dev_context_loss_count(struct device *dev) +{ + return dummy_context_loss_counter; +} + +#endif + +/* Should be called before clk framework init */ +int __init omap_pm_if_early_init(void) +{ + return 0; +} + +/* Must be called after clock framework is initialized */ +int __init omap_pm_if_init(void) +{ + return 0; +} + +void omap_pm_if_exit(void) +{ + /* Deallocate CPUFreq frequency table here */ +} + diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 64fce07a3cc..5695885ea34 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -25,8 +25,6 @@ #include <asm/mach/map.h> #include <asm/memblock.h> -#include "../plat-omap/sram.h" - #include "omap-wakeupgen.h" #include "soc.h" #include "iomap.h" @@ -37,6 +35,7 @@ #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" #include "omap-secure.h" +#include "sram.h" #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 0ef934fec36..e065daa537c 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -441,19 +441,21 @@ int omap_device_get_context_loss_count(struct platform_device *pdev) /** * omap_device_count_resources - count number of struct resource entries needed * @od: struct omap_device * + * @flags: Type of resources to include when counting (IRQ/DMA/MEM) * * Count the number of struct resource entries needed for this * omap_device @od. Used by omap_device_build_ss() to determine how * much memory to allocate before calling * omap_device_fill_resources(). Returns the count. */ -static int omap_device_count_resources(struct omap_device *od) +static int omap_device_count_resources(struct omap_device *od, + unsigned long flags) { int c = 0; int i; for (i = 0; i < od->hwmods_cnt; i++) - c += omap_hwmod_count_resources(od->hwmods[i]); + c += omap_hwmod_count_resources(od->hwmods[i], flags); pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n", od->pdev->name, c, od->hwmods_cnt); @@ -557,52 +559,73 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, od->hwmods = hwmods; od->pdev = pdev; - res_count = omap_device_count_resources(od); /* + * Non-DT Boot: + * Here, pdev->num_resources = 0, and we should get all the + * resources from hwmod. + * * DT Boot: * OF framework will construct the resource structure (currently * does for MEM & IRQ resource) and we should respect/use these * resources, killing hwmod dependency. * If pdev->num_resources > 0, we assume that MEM & IRQ resources * have been allocated by OF layer already (through DTB). - * - * Non-DT Boot: - * Here, pdev->num_resources = 0, and we should get all the - * resources from hwmod. + * As preparation for the future we examine the OF provided resources + * to see if we have DMA resources provided already. In this case + * there is no need to update the resources for the device, we use the + * OF provided ones. * * TODO: Once DMA resource is available from OF layer, we should * kill filling any resources from hwmod. */ - if (res_count > pdev->num_resources) { - /* Allocate resources memory to account for new resources */ - res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); - if (!res) - goto oda_exit3; - - /* - * If pdev->num_resources > 0, then assume that, - * MEM and IRQ resources will only come from DT and only - * fill DMA resource from hwmod layer. - */ - if (pdev->num_resources && pdev->resource) { - dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, res_count); - memcpy(res, pdev->resource, - sizeof(struct resource) * pdev->num_resources); - _od_fill_dma_resources(od, &res[pdev->num_resources]); - } else { - dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", - __func__, res_count); - omap_device_fill_resources(od, res); + if (!pdev->num_resources) { + /* Count all resources for the device */ + res_count = omap_device_count_resources(od, IORESOURCE_IRQ | + IORESOURCE_DMA | + IORESOURCE_MEM); + } else { + /* Take a look if we already have DMA resource via DT */ + for (i = 0; i < pdev->num_resources; i++) { + struct resource *r = &pdev->resource[i]; + + /* We have it, no need to touch the resources */ + if (r->flags == IORESOURCE_DMA) + goto have_everything; } + /* Count only DMA resources for the device */ + res_count = omap_device_count_resources(od, IORESOURCE_DMA); + /* The device has no DMA resource, no need for update */ + if (!res_count) + goto have_everything; - ret = platform_device_add_resources(pdev, res, res_count); - kfree(res); + res_count += pdev->num_resources; + } - if (ret) - goto oda_exit3; + /* Allocate resources memory to account for new resources */ + res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); + if (!res) + goto oda_exit3; + + if (!pdev->num_resources) { + dev_dbg(&pdev->dev, "%s: using %d resources from hwmod\n", + __func__, res_count); + omap_device_fill_resources(od, res); + } else { + dev_dbg(&pdev->dev, + "%s: appending %d DMA resources from hwmod\n", + __func__, res_count - pdev->num_resources); + memcpy(res, pdev->resource, + sizeof(struct resource) * pdev->num_resources); + _od_fill_dma_resources(od, &res[pdev->num_resources]); } + ret = platform_device_add_resources(pdev, res, res_count); + kfree(res); + + if (ret) + goto oda_exit3; + +have_everything: if (!pm_lats) { pm_lats = omap_default_latency; pm_lats_cnt = ARRAY_SIZE(omap_default_latency); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 3f3bf323e20..4653efb87a2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -187,6 +187,8 @@ struct omap_hwmod_soc_ops { int (*is_hardreset_asserted)(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri); int (*init_clkdm)(struct omap_hwmod *oh); + void (*update_context_lost)(struct omap_hwmod *oh); + int (*get_context_lost)(struct omap_hwmod *oh); }; /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ @@ -2015,6 +2017,42 @@ static void _reconfigure_io_chain(void) } /** + * _omap4_update_context_lost - increment hwmod context loss counter if + * hwmod context was lost, and clear hardware context loss reg + * @oh: hwmod to check for context loss + * + * If the PRCM indicates that the hwmod @oh lost context, increment + * our in-memory context loss counter, and clear the RM_*_CONTEXT + * bits. No return value. + */ +static void _omap4_update_context_lost(struct omap_hwmod *oh) +{ + if (oh->prcm.omap4.flags & HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT) + return; + + if (!prm_was_any_context_lost_old(oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.context_offs)) + return; + + oh->prcm.omap4.context_lost_counter++; + prm_clear_context_loss_flags_old(oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.context_offs); +} + +/** + * _omap4_get_context_lost - get context loss counter for a hwmod + * @oh: hwmod to get context loss counter for + * + * Returns the in-memory context loss counter for a hwmod. + */ +static int _omap4_get_context_lost(struct omap_hwmod *oh) +{ + return oh->prcm.omap4.context_lost_counter; +} + +/** * _enable - enable an omap_hwmod * @oh: struct omap_hwmod * * @@ -2097,6 +2135,9 @@ static int _enable(struct omap_hwmod *oh) if (soc_ops.enable_module) soc_ops.enable_module(oh); + if (soc_ops.update_context_lost) + soc_ops.update_context_lost(oh); + r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : -EINVAL; if (!r) { @@ -3421,7 +3462,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh) /** * omap_hwmod_count_resources - count number of struct resources needed by hwmod * @oh: struct omap_hwmod * - * @res: pointer to the first element of an array of struct resource to fill + * @flags: Type of resources to include when counting (IRQ/DMA/MEM) * * Count the number of struct resource array elements necessary to * contain omap_hwmod @oh resources. Intended to be called by code @@ -3434,20 +3475,25 @@ int omap_hwmod_reset(struct omap_hwmod *oh) * resource IDs. * */ -int omap_hwmod_count_resources(struct omap_hwmod *oh) +int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags) { - struct omap_hwmod_ocp_if *os; - struct list_head *p; - int ret; - int i = 0; + int ret = 0; - ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh); + if (flags & IORESOURCE_IRQ) + ret += _count_mpu_irqs(oh); - p = oh->slave_ports.next; + if (flags & IORESOURCE_DMA) + ret += _count_sdma_reqs(oh); - while (i < oh->slaves_cnt) { - os = _fetch_next_ocp_if(&p, &i); - ret += _count_ocp_if_addr_spaces(os); + if (flags & IORESOURCE_MEM) { + int i = 0; + struct omap_hwmod_ocp_if *os; + struct list_head *p = oh->slave_ports.next; + + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + ret += _count_ocp_if_addr_spaces(os); + } } return ret; @@ -3942,17 +3988,21 @@ ohsps_unlock: * omap_hwmod_get_context_loss_count - get lost context count * @oh: struct omap_hwmod * * - * Query the powerdomain of of @oh to get the context loss - * count for this device. + * Returns the context loss count of associated @oh + * upon success, or zero if no context loss data is available. * - * Returns the context loss count of the powerdomain assocated with @oh - * upon success, or zero if no powerdomain exists for @oh. + * On OMAP4, this queries the per-hwmod context loss register, + * assuming one exists. If not, or on OMAP2/3, this queries the + * enclosing powerdomain context loss count. */ int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) { struct powerdomain *pwrdm; int ret = 0; + if (soc_ops.get_context_lost) + return soc_ops.get_context_lost(oh); + pwrdm = omap_hwmod_get_pwrdm(oh); if (pwrdm) ret = pwrdm_get_context_loss_count(pwrdm); @@ -4067,6 +4117,8 @@ void __init omap_hwmod_init(void) soc_ops.deassert_hardreset = _omap4_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; + soc_ops.update_context_lost = _omap4_update_context_lost; + soc_ops.get_context_lost = _omap4_get_context_lost; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; soc_ops.disable_module = _am33xx_disable_module; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 87a3c5b7aa7..3ae852a522f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -2,7 +2,7 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2012 Texas Instruments, Inc. + * Copyright (C) 2011-2012 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -394,12 +394,15 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data - * @clkctrl_reg: PRCM address of the clock control register - * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM + * @clkctrl_offs: offset of the PRCM clock control register + * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM + * @context_offs: offset of the RM_*_CONTEXT register * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range * @flags: PRCM register capabilities for this IP block + * @modulemode: allowable modulemodes + * @context_lost_counter: Count of module level context lost * * If @lostcontext_mask is not defined, context loss check code uses * whole register without masking. @lostcontext_mask should only be @@ -415,6 +418,7 @@ struct omap_hwmod_omap4_prcm { u8 submodule_wkdep_bit; u8 modulemode; u8 flags; + int context_lost_counter; }; @@ -633,7 +637,7 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); int omap_hwmod_softreset(struct omap_hwmod *oh); -int omap_hwmod_count_resources(struct omap_hwmod *oh); +int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a8b3368dca3..b5efe58c0be 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -15,8 +15,7 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> - -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index dc768c50e52..6c8fa70ddad 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -16,8 +16,7 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> - -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 05c6a590655..534974e08ad 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -10,9 +10,8 @@ * published by the Free Software Foundation. */ -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/common.h" +#include <linux/dmaengine.h> +#include <linux/omap-dma.h> #include "omap_hwmod.h" #include "hdq1w.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index a0116d08cf4..e596117004d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -10,7 +10,7 @@ */ #include <linux/platform_data/gpio-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -58,8 +58,9 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -268,6 +269,7 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { }, .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -286,6 +288,7 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -304,6 +307,7 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -322,6 +326,7 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -341,6 +346,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -360,6 +366,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -379,6 +386,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -398,6 +406,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -417,6 +426,7 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -436,6 +446,7 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -455,6 +466,7 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -474,6 +486,7 @@ struct omap_hwmod omap2xxx_timer12_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* wd_timer2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index abe66ced903..0f10919f227 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -19,7 +19,7 @@ #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "l3_3xxx.h" #include "l4_3xxx.h" #include <linux/platform_data/asoc-ti-mcbsp.h> @@ -153,29 +153,16 @@ static struct omap_hwmod omap3xxx_debugss_hwmod = { }; /* timer class */ -static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap3xxx_timer_1ms_sysc, -}; - static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -224,7 +211,8 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -241,7 +229,8 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -259,6 +248,7 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -276,6 +266,7 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -294,6 +285,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -312,6 +304,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -330,6 +323,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -348,6 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -366,6 +361,7 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -383,7 +379,8 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -402,6 +399,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -425,6 +423,7 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { }, .dev_attr = &capability_secure_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d6700d3ddd0..ce1661d18e5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -24,15 +24,14 @@ #include <linux/platform_data/omap_ocp2scp.h> #include <linux/i2c-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <plat/dmtimer.h> #include <plat/iommu.h> -#include "../plat-omap/common.h" - #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" @@ -3105,6 +3104,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -3158,6 +3158,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer1_irqs, .main_clk = "timer1_fck", .prcm = { @@ -3180,6 +3181,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer2_irqs, .main_clk = "timer2_fck", .prcm = { @@ -3354,6 +3356,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer10_irqs, .main_clk = "timer10_fck", .prcm = { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3cf4fdfd7ab..e2c291f52f9 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -30,7 +30,6 @@ #include "clock.h" #include "powerdomain.h" #include "clockdomain.h" -#include <plat/dmtimer.h> #include "omap-pm.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 3d35bd64487..c333fa6dffa 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -31,14 +31,14 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <asm/fncpy.h> + #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <asm/system_misc.h> -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/sram.h" +#include <linux/omap-dma.h> #include "soc.h" #include "common.h" @@ -48,6 +48,7 @@ #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" #include "pm.h" #include "control.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a9b8da1629b..7be3622cfc8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,19 +28,17 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/omap-dma.h> #include <linux/platform_data/gpio-omap.h> #include <trace/events/power.h> +#include <asm/fncpy.h> #include <asm/suspend.h> #include <asm/system_misc.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/sram.h" - #include "soc.h" #include "common.h" #include "cm3xxx.h" @@ -50,6 +48,7 @@ #include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* pm34xx errata defined in pm.h */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index a1a266ce90d..ac25ae6667c 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -114,16 +114,25 @@ struct prm_reset_src_map { /** * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations - * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl + * @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl + * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn + * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn + * + * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are + * deprecated. */ struct prm_ll_data { u32 (*read_reset_sources)(void); + bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx); + void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx); }; extern int prm_register(struct prm_ll_data *pld); extern int prm_unregister(struct prm_ll_data *pld); extern u32 prm_read_reset_sources(void); +extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx); +extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx); #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index bf24fc47603..faeab18696d 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -118,14 +118,13 @@ static struct prm_ll_data omap2xxx_prm_ll_data = { .read_reset_sources = &omap2xxx_prm_read_reset_sources, }; -static int __init omap2xxx_prm_init(void) +int __init omap2xxx_prm_init(void) { if (!cpu_is_omap24xx()) return 0; return prm_register(&omap2xxx_prm_ll_data); } -subsys_initcall(omap2xxx_prm_init); static void __exit omap2xxx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index fe8a14f190a..3194dd87e0e 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -126,8 +126,7 @@ extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); extern void omap2xxx_prm_dpll_reset(void); -extern int __init prm2xxx_init(void); -extern int __exit prm2xxx_exit(void); +extern int __init omap2xxx_prm_init(void); #endif diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 53ec9cbaa3d..1ac73883f89 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,8 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "../plat-omap/common.h" - #include "common.h" #include "powerdomain.h" #include "prm33xx.h" diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index b86116cf0db..db198d05858 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -383,27 +383,30 @@ static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, }; -static int __init omap3xxx_prm_init(void) +int __init omap3xxx_prm_init(void) +{ + if (!cpu_is_omap34xx()) + return 0; + + return prm_register(&omap3xxx_prm_ll_data); +} + +static int __init omap3xxx_prm_late_init(void) { int ret; if (!cpu_is_omap34xx()) return 0; - ret = prm_register(&omap3xxx_prm_ll_data); - if (ret) - return ret; - omap3xxx_prm_enable_io_wakeup(); ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); if (!ret) irq_set_status_flags(omap_prcm_event_to_irq("io"), IRQ_NOAUTOEN); - return ret; } -subsys_initcall(omap3xxx_prm_init); +subsys_initcall(omap3xxx_prm_late_init); static void __exit omap3xxx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index 10cd41a8129..277f71794e6 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -154,6 +154,7 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); extern void omap3xxx_prm_dpll3_reset(void); +extern int __init omap3xxx_prm_init(void); extern u32 omap3xxx_prm_get_reset_sources(void); #endif /* __ASSEMBLER */ diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 6d3467af205..7498bc77fe8 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -346,6 +346,37 @@ static u32 omap44xx_prm_read_reset_sources(void) return r; } +/** + * omap44xx_prm_was_any_context_lost_old - was module hardware context lost? + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Return 1 if any bits were set in the *_CONTEXT_* register + * identified by (@part, @inst, @idx), which means that some context + * was lost for that module; otherwise, return 0. + */ +static bool omap44xx_prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx) +{ + return (omap4_prminst_read_inst_reg(part, inst, idx)) ? 1 : 0; +} + +/** + * omap44xx_prm_clear_context_lost_flags_old - clear context loss flags + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Clear hardware context loss bits for the module identified by + * (@part, @inst, @idx). No return value. XXX Writes to reserved bits; + * is there a way to avoid this? + */ +static void omap44xx_prm_clear_context_loss_flags_old(u8 part, s16 inst, + u16 idx) +{ + omap4_prminst_write_inst_reg(0xffffffff, part, inst, idx); +} + /* Powerdomain low-level functions */ static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) @@ -613,24 +644,28 @@ struct pwrdm_ops omap4_pwrdm_operations = { */ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, + .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, + .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, }; -static int __init omap44xx_prm_init(void) +int __init omap44xx_prm_init(void) { - int ret; - if (!cpu_is_omap44xx()) return 0; - ret = prm_register(&omap44xx_prm_ll_data); - if (ret) - return ret; + return prm_register(&omap44xx_prm_ll_data); +} + +static int __init omap44xx_prm_late_init(void) +{ + if (!cpu_is_omap44xx()) + return 0; omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); } -subsys_initcall(omap44xx_prm_init); +subsys_initcall(omap44xx_prm_late_init); static void __exit omap44xx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index c8e1accdc90..22b0979206c 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -771,6 +771,7 @@ extern void omap44xx_prm_ocp_barrier(void); extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap44xx_prm_restore_irqen(u32 *saved_mask); +extern int __init omap44xx_prm_init(void); extern u32 omap44xx_prm_get_reset_sources(void); # endif diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index d2e0798a4c8..228b850e632 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,8 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include "../plat-omap/common.h" - #include "prm2xxx_3xxx.h" #include "prm2xxx.h" #include "prm3xxx.h" @@ -367,6 +365,51 @@ u32 prm_read_reset_sources(void) } /** + * prm_was_any_context_lost_old - was device context lost? (old API) + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Return 1 if any bits were set in the *_CONTEXT_* register + * identified by (@part, @inst, @idx), which means that some context + * was lost for that module; otherwise, return 0. XXX Deprecated; + * callers need to use a less-SoC-dependent way to identify hardware + * IP blocks. + */ +bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx) +{ + bool ret = true; + + if (prm_ll_data->was_any_context_lost_old) + ret = prm_ll_data->was_any_context_lost_old(part, inst, idx); + else + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + + return ret; +} + +/** + * prm_clear_context_lost_flags_old - clear context loss flags (old API) + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Clear hardware context loss bits for the module identified by + * (@part, @inst, @idx). No return value. XXX Deprecated; callers + * need to use a less-SoC-dependent way to identify hardware IP + * blocks. + */ +void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx) +{ + if (prm_ll_data->clear_context_loss_flags_old) + prm_ll_data->clear_context_loss_flags_old(part, inst, idx); + else + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); +} + +/** * prm_register - register per-SoC low-level data with the PRM * @pld: low-level per-SoC OMAP PRM data & function pointers to register * diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 3ed0d62333c..dae7e4804a4 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,8 +23,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "common.h" #include "clock.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 26c1728e09c..90729171464 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,14 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx.h" #include "clock.h" #include "sdrc.h" +#include "sram.h" /* Memory timing, DLL mode flags */ #define M_DDR 1 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index aa30a3c2088..93d102535c8 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -26,9 +26,9 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <linux/console.h> +#include <linux/omap-dma.h> #include <plat/omap-serial.h> -#include <plat-omap/dma-omap.h> #include "common.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h index 6a6806271fc..c4014f013df 100644 --- a/arch/arm/mach-omap2/serial.h +++ b/arch/arm/mach-omap2/serial.h @@ -1,112 +1 @@ -/* - * arch/arm/plat-omap/include/mach/serial.h - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - -/* OMAP2 serial ports */ -#define OMAP2_UART1_BASE 0x4806a000 -#define OMAP2_UART2_BASE 0x4806c000 -#define OMAP2_UART3_BASE 0x4806e000 - -/* OMAP3 serial ports */ -#define OMAP3_UART1_BASE OMAP2_UART1_BASE -#define OMAP3_UART2_BASE OMAP2_UART2_BASE -#define OMAP3_UART3_BASE 0x49020000 -#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ -#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ - -/* OMAP4 serial ports */ -#define OMAP4_UART1_BASE OMAP2_UART1_BASE -#define OMAP4_UART2_BASE OMAP2_UART2_BASE -#define OMAP4_UART3_BASE 0x48020000 -#define OMAP4_UART4_BASE 0x4806e000 - -/* TI81XX serial ports */ -#define TI81XX_UART1_BASE 0x48020000 -#define TI81XX_UART2_BASE 0x48022000 -#define TI81XX_UART3_BASE 0x48024000 - -/* AM3505/3517 UART4 */ -#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ - -/* AM33XX serial port */ -#define AM33XX_UART1_BASE 0x44E09000 - -/* OMAP5 serial ports */ -#define OMAP5_UART1_BASE OMAP2_UART1_BASE -#define OMAP5_UART2_BASE OMAP2_UART2_BASE -#define OMAP5_UART3_BASE OMAP4_UART3_BASE -#define OMAP5_UART4_BASE OMAP4_UART4_BASE -#define OMAP5_UART5_BASE 0x48066000 -#define OMAP5_UART6_BASE 0x48068000 - -/* External port on Zoom2/3 */ -#define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfa400000 - -#define OMAP_PORT_SHIFT 2 -#define ZOOM_PORT_SHIFT 1 - -#define OMAP24XX_BASE_BAUD (48000000/16) - -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP2UART1 21 -#define OMAP2UART2 22 -#define OMAP2UART3 23 -#define OMAP3UART1 OMAP2UART1 -#define OMAP3UART2 OMAP2UART2 -#define OMAP3UART3 33 -#define OMAP3UART4 34 /* Only on 36xx */ -#define OMAP4UART1 OMAP2UART1 -#define OMAP4UART2 OMAP2UART2 -#define OMAP4UART3 43 -#define OMAP4UART4 44 -#define TI81XXUART1 81 -#define TI81XXUART2 82 -#define TI81XXUART3 83 -#define AM33XXUART1 84 -#define OMAP5UART3 OMAP4UART3 -#define OMAP5UART4 OMAP4UART4 -#define ZOOM_UART 95 /* Only on zoom2/3 */ - -#ifndef __ASSEMBLER__ - -struct omap_board_data; -struct omap_uart_port_info; - -extern void omap_serial_init(void); -extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); -extern void omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *platform_data); -#endif - -#endif +#include <mach/serial.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 474dba7263e..d1dedc8195e 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,13 +26,12 @@ #include <asm/assembler.h> -#include "../plat-omap/sram.h" - #include "omap34xx.h" #include "iomap.h" #include "cm3xxx.h" #include "prm3xxx.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 070096496e2..f31d90774de 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -435,9 +435,7 @@ extern u32 omap_features; #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) #define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) +#define OMAP4_HAS_PERF_SILICON BIT(9) #define OMAP3_HAS_FEATURE(feat,flag) \ @@ -465,9 +463,7 @@ static inline unsigned int omap4_has_ ##feat(void) \ return omap_features & OMAP4_HAS_ ##flag; \ } \ -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) +OMAP4_HAS_FEATURE(perf_silicon, PERF_SILICON) #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 00000000000..0ff0f068bea --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,305 @@ +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif +#define OMAP5_SRAM_PA 0x40300000 + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); + __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (soc_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + int cached = 1; + +#ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; + } +#endif + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) +{ + BUG_ON(!_omap3_sram_configure_core_dpll); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); +} + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +static inline int am33xx_sram_init(void) +{ + return 0; +} + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (soc_is_am33xx()) + am33xx_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h new file mode 100644 index 00000000000..ca7277c2a9e --- /dev/null +++ b/arch/arm/mach-omap2/sram.h @@ -0,0 +1,83 @@ +/* + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASSEMBLY__ +#include <plat/sram.h> + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); + +/* Do not use these */ +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern unsigned long omap3_sram_configure_core_dpll_sz; + +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + +#endif /* __ASSEMBLY__ */ + +/* + * OMAP2+: define the SRAM PA addresses. + * Used by the SRAM management code and the idle sleep code. + */ +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP3_SRAM_PA 0x40200000 +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PA 0x40304000 +#define OMAP4_SRAM_VA 0xfe404000 +#else +#define OMAP4_SRAM_PA 0x40300000 +#endif +#define AM33XX_SRAM_PA 0x40300000 diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 565e5755c9b..b9cff72ceae 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -37,6 +37,10 @@ #include <linux/clockchips.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> @@ -45,6 +49,7 @@ #include <asm/arch_timer.h> #include "omap_hwmod.h" #include "omap_device.h" +#include <plat/counter-32k.h> #include <plat/dmtimer.h> #include "omap-pm.h" @@ -61,18 +66,6 @@ #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" -#ifdef CONFIG_OMAP_32K_TIMER -#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE -#define OMAP3_SECURE_TIMER 12 -#else -#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE -#define OMAP3_SECURE_TIMER 1 -#endif - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -103,7 +96,7 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, - 0xffffffff - cycles, 1); + 0xffffffff - cycles, OMAP_TIMER_POSTED); return 0; } @@ -113,7 +106,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - __omap_dm_timer_stop(&clkev, 1, clkev.rate); + __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -121,10 +114,10 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, period -= 1; /* Looks like we need to first set the load value separately */ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -144,36 +137,144 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +static struct property device_disabled = { + .name = "status", + .length = sizeof("disabled"), + .value = "disabled", +}; + +static struct of_device_id omap_timer_match[] __initdata = { + { .compatible = "ti,omap2-timer", }, + { } +}; + +/** + * omap_get_timer_dt - get a timer using device-tree + * @match - device-tree match structure for matching a device type + * @property - optional timer property to match + * + * Helper function to get a timer during early boot using device-tree for use + * as kernel system timer. Optionally, the property argument can be used to + * select a timer with a specific property. Once a timer is found then mark + * the timer node in device-tree as disabled, to prevent the kernel from + * registering this timer as a platform device and so no one else can use it. + */ +static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, + const char *property) +{ + struct device_node *np; + + for_each_matching_node(np, match) { + if (!of_device_is_available(np)) { + of_node_put(np); + continue; + } + + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); + continue; + } + + prom_add_property(np, &device_disabled); + return np; + } + + return NULL; +} + +/** + * omap_dmtimer_init - initialisation function when device tree is used + * + * For secure OMAP3 devices, timers with device type "timer-secure" cannot + * be used by the kernel as they are reserved. Therefore, to prevent the + * kernel registering these devices remove them dynamically from the device + * tree on boot. + */ +void __init omap_dmtimer_init(void) +{ + struct device_node *np; + + if (!cpu_is_omap34xx()) + return; + + /* If we are a secure device, remove any secure timer nodes */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { + np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); + if (np) + of_node_put(np); + } +} + +/** + * omap_dm_timer_get_errata - get errata flags for a timer + * + * Get the timer errata flags that are specific to the OMAP device being used. + */ +u32 __init omap_dm_timer_get_errata(void) +{ + if (cpu_is_omap24xx()) + return 0; + + return OMAP_TIMER_ERRATA_I103_I767; +} + static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + const char *oh_name; + struct device_node *np; struct omap_hwmod *oh; - struct resource irq_rsrc, mem_rsrc; - size_t size; - int res = 0; - int r; - - sprintf(name, "timer%d", gptimer_id); - omap_hwmod_setup_one(name); - oh = omap_hwmod_lookup(name); + struct resource irq, mem; + int r = 0; + + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_timer_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; + + timer->io_base = of_iomap(np, 0); + + of_node_put(np); + } else { + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; + + sprintf(name, "timer%d", gptimer_id); + oh_name = name; + } + + oh = omap_hwmod_lookup(oh_name); if (!oh) return -ENODEV; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); - if (r) - return -ENXIO; - timer->irq = irq_rsrc.start; + if (!of_have_populated_dt()) { + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, + &irq); + if (r) + return -ENXIO; + timer->irq = irq.start; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); - if (r) - return -ENXIO; - timer->phys_base = mem_rsrc.start; - size = mem_rsrc.end - mem_rsrc.start; + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, + &mem); + if (r) + return -ENXIO; + + /* Static mapping, never released */ + timer->io_base = ioremap(mem.start, mem.end - mem.start); + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, size); if (!timer->io_base) return -ENXIO; @@ -182,42 +283,56 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(timer->fclk)) return -ENODEV; - omap_hwmod_enable(oh); - - if (omap_dm_timer_reserve_systimer(gptimer_id)) - return -ENODEV; - + /* FIXME: Need to remove hard-coded test on timer ID */ if (gptimer_id != 12) { struct clk *src; src = clk_get(NULL, fck_source); if (IS_ERR(src)) { - res = -EINVAL; + r = -EINVAL; } else { - res = __omap_dm_timer_set_source(timer->fclk, src); - if (IS_ERR_VALUE(res)) - pr_warning("%s: timer%i cannot set source\n", - __func__, gptimer_id); + r = clk_set_parent(timer->fclk, src); + if (IS_ERR_VALUE(r)) + pr_warn("%s: %s cannot set source\n", + __func__, oh->name); clk_put(src); } } + + omap_hwmod_setup_one(oh_name); + omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); - __omap_dm_timer_reset(timer, 1, 1); - timer->posted = 1; - timer->rate = clk_get_rate(timer->fclk); + if (posted) + __omap_dm_timer_enable_posted(timer); + + /* Check that the intended posted configuration matches the actual */ + if (posted != timer->posted) + return -EINVAL; + timer->rate = clk_get_rate(timer->fclk); timer->reserved = 1; - return res; + return r; } static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + clkev.errata = omap_dm_timer_get_errata(); + + /* + * For clock-event timers we never read the timer counter and + * so we are not impacted by errata i103 and i767. Therefore, + * we can safely ignore this errata for clock-event timers. + */ + __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, + OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -250,7 +365,8 @@ static bool use_gptimer_clksrc; */ static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); + return (cycle_t)__omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); } static struct clocksource clocksource_gpt = { @@ -264,21 +380,41 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); return 0; } -#ifdef CONFIG_OMAP_32K_TIMER +static struct of_device_id omap_counter_match[] __initdata = { + { .compatible = "ti,omap-counter32k", }, + { } +}; + /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { int ret; + struct device_node *np = NULL; struct omap_hwmod *oh; void __iomem *vbase; const char *oh_name = "counter_32k"; /* + * If device-tree is present, then search the DT blob + * to see if the 32kHz counter is supported. + */ + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } + + /* * First check hwmod data is available for sync32k counter */ oh = omap_hwmod_lookup(oh_name); @@ -287,7 +423,13 @@ static int __init omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - vbase = omap_hwmod_get_mpu_rt_va(oh); + if (np) { + vbase = of_iomap(np, 0); + of_node_put(np); + } else { + vbase = omap_hwmod_get_mpu_rt_va(oh); + } + if (!vbase) { pr_warn("%s: failed to get counter_32k resource\n", __func__); return -ENXIO; @@ -309,23 +451,21 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } -#else -static inline int omap2_sync32k_clocksource_init(void) -{ - return -ENODEV; -} -#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) { int res; - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + clksrc.errata = omap_dm_timer_get_errata(); + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + OMAP_TIMER_NONPOSTED); BUG_ON(res); __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, + OMAP_TIMER_NONPOSTED); setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) @@ -336,25 +476,6 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, gptimer_id, clksrc.rate); } -static void __init omap2_clocksource_init(int gptimer_id, - const char *fck_source) -{ - /* - * First give preference to kernel parameter configuration - * by user (clocksource="gp_timer"). - * - * In case of missing kernel parameter for clocksource, - * first check for availability for 32k-sync timer, in case - * of failure in finding 32k_counter module or registering - * it as clocksource, execution will fallback to gp-timer. - */ - if (use_gptimer_clksrc == true) - omap2_gptimer_clocksource_init(gptimer_id, fck_source); - else if (omap2_sync32k_clocksource_init()) - /* Fall back to gp-timer code */ - omap2_gptimer_clocksource_init(gptimer_id, fck_source); -} - #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER /* * The realtime counter also called master counter, is a free-running @@ -433,48 +554,65 @@ static inline void __init realtime_counter_init(void) {} #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ +#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ + clksrc_nr, clksrc_src) \ +static void __init omap##name##_gptimer_timer_init(void) \ +{ \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ +} + +#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ -static void __init omap##name##_timer_init(void) \ +static void __init omap##name##_sync32k_timer_init(void) \ { \ - omap2_gp_clockevent_init((clkev_nr), clkev_src); \ - omap2_clocksource_init((clksrc_nr), clksrc_src); \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + /* Enable the use of clocksource="gp_timer" kernel parameter */ \ + if (use_gptimer_clksrc) \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + else \ + omap2_sync32k_clocksource_init(); \ } -#define OMAP_SYS_TIMER(name) \ +#define OMAP_SYS_TIMER(name, clksrc) \ struct sys_timer omap##name##_timer = { \ - .init = omap##name##_timer_init, \ + .init = omap##name##_##clksrc##_timer_init, \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) -OMAP_SYS_TIMER(2) -#endif +OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", + 2, OMAP2_MPU_SOURCE); +OMAP_SYS_TIMER(2, sync32k); +#endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, - 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3_secure) -#endif +OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3, sync32k); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_secure, sync32k); +OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_gp, gptimer); +#endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_SOC_AM33XX -OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) -OMAP_SYS_TIMER(3_am33xx) -#endif +OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +OMAP_SYS_TIMER(3_am33xx, gptimer); +#endif /* CONFIG_SOC_AM33XX */ #ifdef CONFIG_ARCH_OMAP4 +OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29); -#endif - -static void __init omap4_timer_init(void) +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); +static void __init omap4_local_timer_init(void) { - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); -#ifdef CONFIG_LOCAL_TIMERS + omap4_sync32k_timer_init(); /* Local timers are not supprted on OMAP4430 ES1.0 */ if (omap_rev() != OMAP4430_REV_ES1_0) { int err; @@ -488,26 +626,32 @@ static void __init omap4_timer_init(void) if (err) pr_err("twd_local_timer_register failed %d\n", err); } -#endif } -OMAP_SYS_TIMER(4) -#endif +#else /* CONFIG_LOCAL_TIMERS */ +static inline void omap4_local_timer_init(void) +{ + omap4_sync32_timer_init(); +} +#endif /* CONFIG_LOCAL_TIMERS */ +OMAP_SYS_TIMER(4, local); +#endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -static void __init omap5_timer_init(void) +OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +static void __init omap5_realtime_timer_init(void) { int err; - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); + omap5_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); if (err) pr_err("%s: arch_timer_register failed %d\n", __func__, err); } -OMAP_SYS_TIMER(5) -#endif +OMAP_SYS_TIMER(5, realtime); +#endif /* CONFIG_SOC_OMAP5 */ /** * omap_timer_init - build and register timer device with an @@ -559,6 +703,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) if (timer_dev_attr) pdata->timer_capability = timer_dev_attr->timer_capability; + pdata->timer_errata = omap_dm_timer_get_errata(); + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); @@ -583,6 +730,10 @@ static int __init omap2_dm_timer_init(void) { int ret; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); if (unlikely(ret)) { pr_err("%s: device registration failed.\n", __func__); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 3fa2bdb4410..e49b40b4c90 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -70,6 +70,7 @@ void __init omap4_pmic_init(const char *pmic_type, { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); /* Register additional devices on i2c1 bus if needed */ |