Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull updates of sound stuff from Takashi Iwai:
 "Here is the first big update chunk of sound stuff for 3.4-rc1.

  In the common sound infrastructure, there are a few changes for
  dynamic PCM support (used in ASoC) and a few clean-ups.  Majority of
  changes are found, as usual, in HD-audio and ASoC.

  Some highlights of HD-audio changes:

   - All the long-standing static quirk codes for Realtek codec were
     finally removed by fixing and extending the Realtek auto-parser.

   - The mute-LED control is standardized over all HD-audio codec
     drivers using the extended vmaster hook.

   - The vmaster slave mixer elements are initialized to 0dB as default
     so that the user won't be annoyed by the silent output after
     updates, e.g.  due to the additions of new elements.

   - Other many fix-ups for the misc HD-audio devices.

  In the ASoC side, this is a very active release, including a quite a
  few framework enhancements.  Some highlights:

   - Support for widgets not associated with a CODEC, an important part
     of the dynamic PCM framework.

   - A library factoring out the common code shared by dmaengine based
     DMA drivers contributed by Lars-Peter Clausen.  This will save a
     lot of code and make it much easier to deploy enhancements to
     dmaengine.

   - Support for binary controls, used for providing runtime
     configuration of algorithm coefficients.

   - A new DAPM widget type for regulator supplies allowing drivers for
     devices that can power down unused supplies while active to do
     without any per-driver code.

   - DAPM widgets for DAIs, initially giving a speed boost for playback
     startup and shutdown and also the basis for CODEC<->CODEC DAI link
     support.

   - Support for specifying the number of significant bits on audio
     interfaces, useful for allowing applications to know how much
     effort to put into generating data for a larger sample format.

   - Conversion of the FSI driver used on some SH processors to
     DMAEngine.

   - Conversion of EP93xx drivers to DMAEngine.

   - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics
     WM2200.

   - Move audmux driver from arc/arm to sound/soc

   - McBSP move from arch/ to sound/ and updates

  Also, a few small updates and fixes for other drivers like au88x0,
  ymfpci, USB 6fire, USB usx2yaudio are included."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits)
  ASoC: wm8994: Provide VMID mode control and fix default sequence
  ASoC: wm8994: Add missing break in resume
  ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF
  ASoC: pxa-ssp: atomically set stream active masks
  ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master
  ASoC: Samsung: Added to support mono recording
  ALSA: hda - Fix build with CONFIG_PM=n
  ALSA: au88x0 - Avoid possible Oops at unbinding
  ALSA: usb-audio - Fix build error by consitification of rate list
  ASoC: core: Fix obscure leak of runtime array
  ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link()
  ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list
  ASoC: wm8996: Add 44.1kHz support
  ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE
  ASoC: mx27vis-aic32x4: Convert it to platform driver
  ALSA: hda - fix printing of high HDMI sample rates
  ALSA: ymfpci - Fix legacy registers on S3/S4 resume
  ALSA: control - Fixe a trailing white space error
  ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook()
  ALSA: hda - Add "Mute-LED Mode" enum control
  ...

5 files changed, 136 insertions, 33 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bd76394ccaf..06326a6e460 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -17,7 +17,9 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 
-obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
+obj-y += mcbsp.o
+endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
 
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4e9071589bf..90c76d340fb 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -41,6 +41,7 @@
 #include <video/omap-panel-nokia-dsi.h>
 #include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
+#include <linux/platform_data/omap-abe-twl6040.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -378,12 +379,40 @@ static struct platform_device sdp4430_dmic_codec = {
 	.id	= -1,
 };
 
+static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
+	.card_name = "SDP4430",
+	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	.has_ep		= 1,
+	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	.has_vibra	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+
+	.has_dmic	= 1,
+	.has_hsmic	= 1,
+	.has_mainmic	= 1,
+	.has_submic	= 1,
+	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+
+	.jack_detection = 1,
+	/* MCLK input is 38.4MHz */
+	.mclk_freq	= 38400000,
+};
+
+static struct platform_device sdp4430_abe_audio = {
+	.name		= "omap-abe-twl6040",
+	.id		= -1,
+	.dev = {
+		.platform_data = &sdp4430_abe_audio_data,
+	},
+};
+
 static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_gpio_keys_device,
 	&sdp4430_leds_gpio,
 	&sdp4430_leds_pwm,
 	&sdp4430_vbat,
 	&sdp4430_dmic_codec,
+	&sdp4430_abe_audio,
 };
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 28fc271f703..e4415917693 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
+#include <linux/platform_data/omap-abe-twl6040.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/gic.h>
@@ -91,9 +92,34 @@ static struct platform_device leds_gpio = {
 	},
 };
 
+static struct omap_abe_twl6040_data panda_abe_audio_data = {
+	/* Audio out */
+	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* HandsFree through expasion connector */
+	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
+	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* PandaBoard: FM RX, PandaBoardES: audio in */
+	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* No jack detection. */
+	.jack_detection	= 0,
+	/* MCLK input is 38.4MHz */
+	.mclk_freq	= 38400000,
+
+};
+
+static struct platform_device panda_abe_audio = {
+	.name		= "omap-abe-twl6040",
+	.id		= -1,
+	.dev = {
+		.platform_data = &panda_abe_audio_data,
+	},
+};
+
 static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 	&wl1271_device,
+	&panda_abe_audio,
 };
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
@@ -252,8 +278,25 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
+static struct twl4030_codec_data twl6040_codec = {
+	/* single-step ramp for headset and handsfree */
+	.hs_left_step	= 0x0f,
+	.hs_right_step	= 0x0f,
+	.hf_left_step	= 0x1d,
+	.hf_right_step	= 0x1d,
+};
+
+static struct twl4030_audio_data twl6040_audio = {
+	.codec		= &twl6040_codec,
+	.audpwron_gpio	= 127,
+	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
+	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata;
+static struct twl4030_platform_data omap4_panda_twldata = {
+	.audio		= &twl6040_audio,
+};
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -485,6 +528,20 @@ void omap4_panda_display_init(void)
 	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
 }
 
+static void omap4_panda_init_rev(void)
+{
+	if (cpu_is_omap443x()) {
+		/* PandaBoard 4430 */
+		/* ASoC audio configuration */
+		panda_abe_audio_data.card_name = "PandaBoard";
+		panda_abe_audio_data.has_hsmic = 1;
+	} else {
+		/* PandaBoard ES */
+		/* ASoC audio configuration */
+		panda_abe_audio_data.card_name = "PandaBoardES";
+	}
+}
+
 static void __init omap4_panda_init(void)
 {
 	int package = OMAP_PACKAGE_CBS;
@@ -498,6 +555,7 @@ static void __init omap4_panda_init(void)
 	if (ret)
 		pr_err("error setting wl12xx data: %d\n", ret);
 
+	omap4_panda_init_rev();
 	omap4_panda_i2c_init();
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	platform_device_register(&omap_vwlan_device);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 283d11eae69..e9fae652cd0 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -26,7 +26,6 @@
 
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/mcbsp.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
@@ -304,29 +303,8 @@ static struct platform_device omap_pcm = {
 	.id	= -1,
 };
 
-/*
- * OMAP2420 has 2 McBSP ports
- * OMAP2430 has 5 McBSP ports
- * OMAP3 has 5 McBSP ports
- * OMAP4 has 4 McBSP ports
- */
-OMAP_MCBSP_PLATFORM_DEVICE(1);
-OMAP_MCBSP_PLATFORM_DEVICE(2);
-OMAP_MCBSP_PLATFORM_DEVICE(3);
-OMAP_MCBSP_PLATFORM_DEVICE(4);
-OMAP_MCBSP_PLATFORM_DEVICE(5);
-
 static void omap_init_audio(void)
 {
-	platform_device_register(&omap_mcbsp1);
-	platform_device_register(&omap_mcbsp2);
-	if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		platform_device_register(&omap_mcbsp3);
-		platform_device_register(&omap_mcbsp4);
-	}
-	if (cpu_is_omap243x() || cpu_is_omap34xx())
-		platform_device_register(&omap_mcbsp5);
-
 	platform_device_register(&omap_pcm);
 }
 
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index fb4bcf81a18..ecc039e794d 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,7 +34,7 @@
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
-/* McBSP internal signal muxing function */
+/* McBSP1 internal signal muxing function for OMAP2/3 */
 static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
 				   const char *src)
 {
@@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
 	return 0;
 }
 
+/* McBSP4 internal signal muxing function for OMAP4 */
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX	(1 << 31)
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX	(1 << 30)
+static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
+				   const char *src)
+{
+	u32 v;
+
+	/*
+	 * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
+	 * mux) is used */
+	v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+	if (!strcmp(signal, "clkr")) {
+		if (!strcmp(src, "clkr"))
+			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+		else if (!strcmp(src, "clkx"))
+			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+		else
+			return -EINVAL;
+	} else if (!strcmp(signal, "fsr")) {
+		if (!strcmp(src, "fsr"))
+			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+		else if (!strcmp(src, "fsx"))
+			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+		else
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+	return 0;
+}
+
 /* McBSP CLKS source switching function */
 static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
 				   const char *src)
@@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->has_ccr = true;
 	}
 	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-	if (id == 1)
+
+	/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
+	if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
 		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
+	/* On OMAP4 the McBSP4 port has 6 pin configuration */
+	if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
+		pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
+
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
 			/* The FIFO has 1024 + 256 locations */
@@ -180,7 +222,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
-	omap_mcbsp_count++;
 	return 0;
 }
 
@@ -188,11 +229,6 @@ static int __init omap2_mcbsp_init(void)
 {
 	omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
 
-	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
-								GFP_KERNEL);
-	if (!mcbsp_ptr)
-		return -ENOMEM;
-
-	return omap_mcbsp_init();
+	return 0;
 }
 arch_initcall(omap2_mcbsp_init);