Merge tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical

* tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6:
   iomux-mx25.h slew rate adjusted for LCD __LD pins

(update to v3.3-rc6)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

10 files changed, 92 insertions, 20 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 337f98dd814..21a4095a100 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 6b77ad95981..a659e198892 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index febffde2ff1..7e9338e8d68 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index cfdbb86bc84..72e018b9b26 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 997033129d2..bbb870c04a5 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3fbb0c0b84a..24ad0d15451 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -306,6 +306,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 609ea2ded7e..2cc1aa004b9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)
@@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-module_init(omap2_mbox_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 40a8fbc07e4..ebc59509131 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -24,6 +24,7 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -52,18 +56,20 @@ void omap_bus_sync(void)
 	}
 }
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 03f038c9b87..184ae21feea 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 771dc781b74..f51348dafaf 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;