usb: musb: AM35x: moving internal phy functions out of usb_musb.c file

Moved all the board specific internal PHY functions out of usb_musb.c file
as this file is shared between the OMAP2+ and AM35xx platforms.
There exists a file which has the functions specific to internal PHY
used for OMAP4 platform. Moved all phy specific functions to this file
and passing these functions through board data in the board file.

Signed-off-by: Hema HK <hemahk@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

4 files changed, 99 insertions, 98 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1c0c2b02d87..43d4e14d0ec 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -218,7 +218,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
 					   hsmmc.o \
 					   omap_phy_internal.o
 
-obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o \
+					   omap_phy_internal.o \
 
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 10d60b7743c..3413bf993c7 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -409,6 +409,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.interface_type         = MUSB_INTERFACE_ULPI,
 	.mode                   = MUSB_OTG,
 	.power                  = 500,
+	.set_phy_power		= am35x_musb_phy_power,
+	.clear_irq		= am35x_musb_clear_irq,
+	.set_mode		= am35x_musb_set_mode,
+	.reset			= am35x_musb_reset,
 };
 
 static __init void am3517_evm_musb_init(void)
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 745252c60e3..f172ec06c06 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -29,6 +29,7 @@
 #include <linux/usb.h>
 
 #include <plat/usb.h>
+#include "control.h"
 
 /* OMAP control module register for UTMI PHY */
 #define CONTROL_DEV_CONF		0x300
@@ -147,3 +148,95 @@ int omap4430_phy_exit(struct device *dev)
 
 	return 0;
 }
+
+void am35x_musb_reset(void)
+{
+	u32	regval;
+
+	/* Reset the musb interface */
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	regval |= AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval &= ~AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+	u32 devconf2;
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+		devconf2 |= CONF2_PHY_PLLON;
+
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+		pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+				& CONF2_PHYCLKGD)) {
+			cpu_relax();
+
+			if (time_after(jiffies, timeout)) {
+				pr_err(KERN_ERR "musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~CONF2_PHY_PLLON;
+		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval |= AM35XX_USBOTGSS_INT_CLR;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am35x_musb_set_mode(u8 musb_mode)
+{
+	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+	devconf2 &= ~CONF2_OTGMODE;
+	switch (musb_mode) {
+#ifdef	CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
+		devconf2 |= CONF2_FORCE_HOST;
+		break;
+#endif
+#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
+		devconf2 |= CONF2_FORCE_DEVICE;
+		break;
+#endif
+#ifdef	CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
+		devconf2 |= CONF2_NO_OVERRIDE;
+		break;
+#endif
+	default:
+		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+	}
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 5298949d4b1..9107883287f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -30,102 +30,9 @@
 #include <mach/irqs.h>
 #include <mach/am35xx.h>
 #include <plat/usb.h>
-#include "control.h"
 
 #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
 
-static void am35x_musb_reset(void)
-{
-	u32	regval;
-
-	/* Reset the musb interface */
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	regval |= AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval &= ~AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-}
-
-static void am35x_musb_phy_power(u8 on)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 devconf2;
-
-	if (on) {
-		/*
-		 * Start the on-chip PHY and its PLL.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-		devconf2 |= CONF2_PHY_PLLON;
-
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-		pr_info(KERN_INFO "Waiting for PHY clock good...\n");
-		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-				& CONF2_PHYCLKGD)) {
-			cpu_relax();
-
-			if (time_after(jiffies, timeout)) {
-				pr_err(KERN_ERR "musb PHY clock good timed out\n");
-				break;
-			}
-		}
-	} else {
-		/*
-		 * Power down the on-chip PHY.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~CONF2_PHY_PLLON;
-		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-	}
-}
-
-static void am35x_musb_clear_irq(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval |= AM35XX_USBOTGSS_INT_CLR;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am35x_musb_set_mode(u8 musb_mode)
-{
-	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~CONF2_OTGMODE;
-	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
-		devconf2 |= CONF2_FORCE_HOST;
-		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
-		devconf2 |= CONF2_FORCE_DEVICE;
-		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
-		devconf2 |= CONF2_NO_OVERRIDE;
-		break;
-#endif
-	default:
-		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
-	}
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
-
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
 		.flags	= IORESOURCE_MEM,
@@ -189,10 +96,6 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 		musb_device.name = "musb-am35x";
 		musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
 		musb_resources[1].start = INT_35XX_USBOTG_IRQ;
-		board_data->set_phy_power = am35x_musb_phy_power;
-		board_data->clear_irq = am35x_musb_clear_irq;
-		board_data->set_mode = am35x_musb_set_mode;
-		board_data->reset = am35x_musb_reset;
 	} else if (cpu_is_omap34xx()) {
 		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
 	} else if (cpu_is_omap44xx()) {