diff options
author | Paul Walmsley <paul@pwsan.com> | 2010-12-14 12:42:35 -0700 |
---|---|---|
committer | Paul Walmsley <paul@pwsan.com> | 2010-12-21 19:55:12 -0700 |
commit | 2092e5ccf89db09ebde94e9aabd3c86d5fa05c6c (patch) | |
tree | c286d08314b82afe63485a79e13013492186e218 /arch/arm/mach-omap2 | |
parent | e4dc8f507c3066d6fcece988d99b6d766c46af85 (diff) |
OMAP2+: hwmod: add postsetup state
Allow board files and OMAP core code to control the state that some or
all of the hwmods end up in at the end of _setup() (called by
omap_hwmod_late_init() ). Reimplement the old skip_setup_idle code in
terms of this new postsetup state code.
There are two use-cases for this patch: the !CONFIG_PM_RUNTIME case,
in which all IP blocks should stay enabled after _setup() finishes;
and the MPU watchdog case, in which the watchdog IP block should enter
idle if watchdog coverage of kernel initialization is desired, and
should be disabled otherwise.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: BenoƮt Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Charulatha Varadarajan <charu@ti.com>
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r-- | arch/arm/mach-omap2/io.c | 32 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 82 |
2 files changed, 83 insertions, 31 deletions
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 77bf0d1baee..7362b69a154 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -312,6 +312,11 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } +static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) +{ + return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); +} + /* * Initialize asm_irq_base for entry-macro.S */ @@ -333,6 +338,8 @@ static inline void omap_irq_base_init(void) void __init omap2_init_common_infrastructure(void) { + u8 postsetup_state; + pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_autodeps); if (cpu_is_omap242x()) @@ -343,6 +350,16 @@ void __init omap2_init_common_infrastructure(void) omap3xxx_hwmod_init(); else if (cpu_is_omap44xx()) omap44xx_hwmod_init(); + else + pr_err("Could not init hwmod data - unknown SoC\n"); + + /* Set the default postsetup state for all hwmods */ +#ifdef CONFIG_PM_RUNTIME + postsetup_state = _HWMOD_STATE_IDLE; +#else + postsetup_state = _HWMOD_STATE_ENABLED; +#endif + omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); omap_pm_if_early_init(); @@ -355,25 +372,16 @@ void __init omap2_init_common_infrastructure(void) else if (cpu_is_omap44xx()) omap4xxx_clk_init(); else - pr_err("Could not init clock framework - unknown CPU\n"); + pr_err("Could not init clock framework - unknown SoC\n"); } -/* - * XXX Ideally, this function will dwindle into nothingness over time; - * almost all device init code should be possible through initcalls - * and other generalized mechanisms - */ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { - u8 skip_setup_idle = 0; - omap_serial_early_init(); -#ifndef CONFIG_PM_RUNTIME - skip_setup_idle = 1; -#endif - omap_hwmod_late_init(skip_setup_idle); + omap_hwmod_late_init(); + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c051fa49359..683428fa91f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1313,23 +1313,15 @@ static int _shutdown(struct omap_hwmod *oh) /** * _setup - do initial configuration of omap_hwmod * @oh: struct omap_hwmod * - * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1 * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. @skip_setup_idle is intended to be used on - * a system that will not call omap_hwmod_enable() to enable devices - * (e.g., a system without PM runtime). Returns -EINVAL if the hwmod - * is in the wrong state or returns 0. + * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the + * wrong state or returns 0. */ static int _setup(struct omap_hwmod *oh, void *data) { int i, r; - u8 skip_setup_idle; - - if (!oh || !data) - return -EINVAL; - - skip_setup_idle = *(u8 *)data; + u8 postsetup_state; /* Set iclk autoidle mode */ if (oh->slaves_cnt > 0) { @@ -1349,7 +1341,6 @@ static int _setup(struct omap_hwmod *oh, void *data) } } - mutex_init(&oh->_mutex); oh->_state = _HWMOD_STATE_INITIALIZED; /* @@ -1383,8 +1374,25 @@ static int _setup(struct omap_hwmod *oh, void *data) } } - if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle) + postsetup_state = oh->_postsetup_state; + if (postsetup_state == _HWMOD_STATE_UNKNOWN) + postsetup_state = _HWMOD_STATE_ENABLED; + + /* + * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - + * it should be set by the core code as a runtime flag during startup + */ + if ((oh->flags & HWMOD_INIT_NO_IDLE) && + (postsetup_state == _HWMOD_STATE_IDLE)) + postsetup_state = _HWMOD_STATE_ENABLED; + + if (postsetup_state == _HWMOD_STATE_IDLE) _omap_hwmod_idle(oh); + else if (postsetup_state == _HWMOD_STATE_DISABLED) + _shutdown(oh); + else if (postsetup_state != _HWMOD_STATE_ENABLED) + WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n", + oh->name, postsetup_state); return 0; } @@ -1485,6 +1493,8 @@ int omap_hwmod_register(struct omap_hwmod *oh) list_add_tail(&oh->node, &omap_hwmod_list); + mutex_init(&oh->_mutex); + oh->_state = _HWMOD_STATE_REGISTERED; ret = 0; @@ -1585,13 +1595,12 @@ int omap_hwmod_init(struct omap_hwmod **ohs) /** * omap_hwmod_late_init - do some post-clock framework initialization - * @skip_setup_idle: if 1, do not idle hwmods in _setup() * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls * _setup() on each hwmod. Returns 0. */ -int omap_hwmod_late_init(u8 skip_setup_idle) +int omap_hwmod_late_init(void) { int r; @@ -1603,10 +1612,7 @@ int omap_hwmod_late_init(u8 skip_setup_idle) WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", MPU_INITIATOR_NAME); - if (skip_setup_idle) - pr_debug("omap_hwmod: will leave hwmods enabled during setup\n"); - - omap_hwmod_for_each(_setup, &skip_setup_idle); + omap_hwmod_for_each(_setup, NULL); return 0; } @@ -2132,3 +2138,41 @@ int omap_hwmod_for_each_by_class(const char *classname, return ret; } +/** + * omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod + * @oh: struct omap_hwmod * + * @state: state that _setup() should leave the hwmod in + * + * Sets the hwmod state that @oh will enter at the end of _setup() (called by + * omap_hwmod_late_init()). Only valid to call between calls to + * omap_hwmod_init() and omap_hwmod_late_init(). Returns 0 upon success or + * -EINVAL if there is a problem with the arguments or if the hwmod is + * in the wrong state. + */ +int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state) +{ + int ret; + + if (!oh) + return -EINVAL; + + if (state != _HWMOD_STATE_DISABLED && + state != _HWMOD_STATE_ENABLED && + state != _HWMOD_STATE_IDLE) + return -EINVAL; + + mutex_lock(&oh->_mutex); + + if (oh->_state != _HWMOD_STATE_REGISTERED) { + ret = -EINVAL; + goto ohsps_unlock; + } + + oh->_postsetup_state = state; + ret = 0; + +ohsps_unlock: + mutex_unlock(&oh->_mutex); + + return ret; +} |