OMAP4: DPLL: Add dpll api to control GATE_CTRL

On OMAP4, the dpll post divider outputs (MX outputs)
along with clockout_x2 output provide a way to allow/deny
hardware level autogating.
Allowing autoidle would mean that the hw would autogate
this clock when there is no dependency for it.
Denying idle would mean that this clock output will be
forced to stay enabled.

Add dpll api's to read/allow/deny idle control
for these dpll mx postdividers.

NOTE: The gatectrl bit set to 0 allows gatectrl,
and the bit set to 1 denies gatectrl.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: moved OMAP4-specific DPLL control code to
 mach-omap2/dpll44xx.c; added some documentation for CLOCK_CLKOUTX2]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

3 files changed, 82 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 10c3c8f16ea..89274a9f035 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -123,7 +123,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
 					   clock3517.o clock36xx.o \
 					   dpll3xxx.o clock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
-					   dpll3xxx.o
+					   dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2a939e5ec6a..c450d69a0dc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -65,6 +65,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk);
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
 int omap3_noncore_dpll_enable(struct clk *clk);
 void omap3_noncore_dpll_disable(struct clk *clk);
+int omap4_dpllmx_gatectrl_read(struct clk *clk);
+void omap4_dpllmx_allow_gatectrl(struct clk *clk);
+void omap4_dpllmx_deny_gatectrl(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
new file mode 100644
index 00000000000..94a3592cd54
--- /dev/null
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -0,0 +1,78 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm-regbits-44xx.h"
+
+/* Supported only on OMAP4 */
+int omap4_dpllmx_gatectrl_read(struct clk *clk)
+{
+	u32 v;
+	u32 mask;
+
+	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+		return -EINVAL;
+
+	mask = clk->flags & CLOCK_CLKOUTX2 ?
+			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+	v = __raw_readl(clk->clksel_reg);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+void omap4_dpllmx_allow_gatectrl(struct clk *clk)
+{
+	u32 v;
+	u32 mask;
+
+	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+		return;
+
+	mask = clk->flags & CLOCK_CLKOUTX2 ?
+			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+	v = __raw_readl(clk->clksel_reg);
+	/* Clear the bit to allow gatectrl */
+	v &= ~mask;
+	__raw_writel(v, clk->clksel_reg);
+}
+
+void omap4_dpllmx_deny_gatectrl(struct clk *clk)
+{
+	u32 v;
+	u32 mask;
+
+	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+		return;
+
+	mask = clk->flags & CLOCK_CLKOUTX2 ?
+			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+	v = __raw_readl(clk->clksel_reg);
+	/* Set the bit to deny gatectrl */
+	v |= mask;
+	__raw_writel(v, clk->clksel_reg);
+}