Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - perf updates from Will Deacon:

     The main changes are callchain stability fixes from Jean Pihet and
     event mapping and PMU name rework from Mark Rutland

     The latter is preparatory work for enabling some code re-use with
     arm64 in the future.

   - updates for nommu from Uwe Kleine-König:

     Two different fixes for the same problem making some ARM nommu
     configurations not boot since 3.6-rc1.  The problem is that
     user_addr_max returned the biggest available RAM address which
     makes some copy_from_user variants fail to read from XIP memory.

   - deprecate legacy OMAP DMA API, in preparation for it's removal.

     The popular drivers have been converted over, leaving a very small
     number of rarely used drivers, which hopefully can be converted
     during the next cycle with a bit more visibility (and hopefully
     people popping out of the woodwork to help test)

   - more tweaks for BE systems, particularly with the kernel image
     format.  In connection with this, I've cleaned up the way we
     generate the linker script for the decompressor.

   - removal of hard-coded assumptions of the kernel stack size, making
     everywhere depend on the value of THREAD_SIZE_ORDER.

   - MCPM updates from Nicolas Pitre.

   - Make it easier for proper CPU part number checks (which should
     always include the vendor field).

   - Assembly code optimisation - use the "bx" instruction when
     returning from a function on ARMv6+ rather than "mov pc, reg".

   - Save the last kernel misaligned fault location and report it via
     the procfs alignment file.

   - Clean up the way we create the initial stack frame, which is a
     repeated pattern in several different locations.

   - Support for 8-byte get_user(), needed for some DRM implementations.

   - mcs locking from Will Deacon.

   - Save and restore a few more Cortex-A9 registers (for errata
     workarounds)

   - Fix various aspects of the SWP emulation, and the ELF hwcap for the
     SWP instruction.

   - Update LPAE logic for pte_write and pmd_write to make it more
     correct.

   - Support for Broadcom Brahma15 CPU cores.

   - ARM assembly crypto updates from Ard Biesheuvel"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits)
  ARM: add comments to the early page table remap code
  ARM: 8122/1: smp_scu: enable SCU standby support
  ARM: 8121/1: smp_scu: use macro for SCU enable bit
  ARM: 8120/1: crypto: sha512: add ARM NEON implementation
  ARM: 8119/1: crypto: sha1: add ARM NEON implementation
  ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures
  ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
  ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15
  ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores
  ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE
  ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear
  ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives
  ARM: SWP emulation: only initialise on ARMv7 CPUs
  ARM: SWP emulation: always enable when SMP is enabled
  ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume
  ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking
  ARM: 8091/2: add get_user() support for 8 byte types
  ARM: 8097/1: unistd.h: relocate comments back to place
  ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)
  ARM: 8090/1: add revision info for PL310 errata 588369 and 727915
  ...

3 files changed, 8 insertions, 7 deletions

diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9086ce03ae1..b84a0122d82 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -10,6 +10,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/smp_scu.h>
 #include <asm/memory.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -334,7 +335,7 @@ ENDPROC(omap4_cpu_resume)
 
 #ifndef CONFIG_OMAP4_ERRATA_I688
 ENTRY(omap_bus_sync)
-	mov	pc, lr
+	ret	lr
 ENDPROC(omap_bus_sync)
 #endif
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 680a7c56cc3..2c88ff2d023 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -101,7 +101,7 @@ i_dll_wait:
 i_dll_delay:
 	subs	r4, r4, #0x1
 	bne	i_dll_delay
-	mov	pc, lr
+	ret	lr
 
 	/*
 	 * shift up or down voltage, use R9 as input to tell level.
@@ -125,7 +125,7 @@ volt_delay:
 	ldr	r7, [r3]		@ get timer value
 	cmp	r5, r7			@ time up?
 	bhi	volt_delay		@ not yet->branch
-	mov	pc, lr			@ back to caller.
+	ret	lr			@ back to caller.
 
 omap242x_sdi_cm_clksel2_pll:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
@@ -220,7 +220,7 @@ volt_delay_c:
 	ldr	r7, [r10]		@ get timer value
 	cmp	r8, r7			@ time up?
 	bhi	volt_delay_c		@ not yet->branch
-	mov	pc, lr			@ back to caller
+	ret	lr			@ back to caller
 
 omap242x_srs_cm_clksel2_pll:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index a1e9edd673f..d5deb9761fc 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -101,7 +101,7 @@ i_dll_wait:
 i_dll_delay:
 	subs	r4, r4, #0x1
 	bne	i_dll_delay
-	mov	pc, lr
+	ret	lr
 
 	/*
 	 * shift up or down voltage, use R9 as input to tell level.
@@ -125,7 +125,7 @@ volt_delay:
 	ldr	r7, [r3]		@ get timer value
 	cmp	r5, r7			@ time up?
 	bhi	volt_delay		@ not yet->branch
-	mov	pc, lr			@ back to caller.
+	ret	lr			@ back to caller.
 
 omap243x_sdi_cm_clksel2_pll:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
@@ -220,7 +220,7 @@ volt_delay_c:
 	ldr	r7, [r10]		@ get timer value
 	cmp	r8, r7			@ time up?
 	bhi	volt_delay_c		@ not yet->branch
-	mov	pc, lr			@ back to caller
+	ret	lr			@ back to caller
 
 omap243x_srs_cm_clksel2_pll:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)