Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc power management changes from Arnd Bergmann:
 "These are various power management related changes, mainly concerning
  cpuidle on i.MX and OMAP, as well as a the move of the omap
  smartreflex driver to live in the power subsystem."

Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h}

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge
  ARM: OMAP2+: do not allow SmartReflex to be built as a module
  ARM: OMAP2: Use hwmod to initialize mmc for 2420
  ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state
  ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state
  ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state
  ARM: OMAP3: PM: cleanup cam_pwrdm leftovers
  ARM: OMAP3: PM: call pre/post transition per powerdomain
  ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm
  ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle
  ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux
  ARM: OMAP3+: PRM: Enable IO wake up
  ARM: OMAP4: PRM: Add IO Daisychain support
  ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file
  ARM: OMAP3: PM: correct enable/disable of daisy io chain
  ARM: OMAP2+: PRM: fix compile for OMAP4-only build
  W1: OMAP HDQ1W: use runtime PM
  ARM: OMAP2+: HDQ1W: use omap_device
  W1: OMAP HDQ1W: use 32-bit register accesses
  W1: OMAP HDQ1W: allow driver to be built on all OMAP2+
  ...

23 files changed, 375 insertions, 1686 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 19b771d0c0d..b7a4ab65fac 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -74,8 +74,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
+
+obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 31344528eb5..f2a49a48ef5 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -75,20 +75,6 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
 
 static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
 
-static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
-				struct clockdomain *clkdm)
-{
-	clkdm_allow_idle(clkdm);
-	return 0;
-}
-
-static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
-				struct clockdomain *clkdm)
-{
-	clkdm_deny_idle(clkdm);
-	return 0;
-}
-
 static int __omap3_enter_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
@@ -106,8 +92,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
 
 	/* Deny idle for C1 */
 	if (index == 0) {
-		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
-		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+		clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
+		clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
 	}
 
 	/*
@@ -129,8 +115,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
 
 	/* Re-allow idle for C1 */
 	if (index == 0) {
-		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
-		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+		clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
+		clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
 	}
 
 return_sleep_time:
@@ -176,7 +162,7 @@ static int next_valid_state(struct cpuidle_device *dev,
 	u32 mpu_deepest_state = PWRDM_POWER_RET;
 	u32 core_deepest_state = PWRDM_POWER_RET;
 	int idx;
-	int next_index = -1;
+	int next_index = 0; /* C1 is the default value */
 
 	if (enable_off_mode) {
 		mpu_deepest_state = PWRDM_POWER_OFF;
@@ -207,12 +193,6 @@ static int next_valid_state(struct cpuidle_device *dev,
 		}
 	}
 
-	/*
-	 * C1 is always valid.
-	 * So, no need to check for 'next_index == -1' outside
-	 * this loop.
-	 */
-
 	return next_index;
 }
 
@@ -226,23 +206,22 @@ static int next_valid_state(struct cpuidle_device *dev,
  * the device to the specified or a safer state.
  */
 static int omap3_enter_idle_bm(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
+			       struct cpuidle_driver *drv,
 			       int index)
 {
 	int new_state_idx;
-	u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
+	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
 	struct omap3_idle_statedata *cx;
 	int ret;
 
 	/*
-	 * Prevent idle completely if CAM is active.
+	 * Use only C1 if CAM is active.
 	 * CAM does not have wakeup capability in OMAP3.
 	 */
-	cam_state = pwrdm_read_pwrst(cam_pd);
-	if (cam_state == PWRDM_POWER_ON) {
+	if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON)
 		new_state_idx = drv->safe_state_index;
-		goto select_state;
-	}
+	else
+		new_state_idx = next_valid_state(dev, drv, index);
 
 	/*
 	 * FIXME: we currently manage device-specific idle states
@@ -252,24 +231,28 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	 *        its own code.
 	 */
 
-	/*
-	 * Prevent PER off if CORE is not in retention or off as this
-	 * would disable PER wakeups completely.
-	 */
-	cx = &omap3_idle_data[index];
+	/* Program PER state */
+	cx = &omap3_idle_data[new_state_idx];
 	core_next_state = cx->core_state;
 	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
-	if ((per_next_state == PWRDM_POWER_OFF) &&
-	    (core_next_state > PWRDM_POWER_RET))
-		per_next_state = PWRDM_POWER_RET;
+	if (new_state_idx == 0) {
+		/* In C1 do not allow PER state lower than CORE state */
+		if (per_next_state < core_next_state)
+			per_next_state = core_next_state;
+	} else {
+		/*
+		 * Prevent PER OFF if CORE is not in RETention or OFF as this
+		 * would disable PER wakeups completely.
+		 */
+		if ((per_next_state == PWRDM_POWER_OFF) &&
+		    (core_next_state > PWRDM_POWER_RET))
+			per_next_state = PWRDM_POWER_RET;
+	}
 
 	/* Are we changing PER target state? */
 	if (per_next_state != per_saved_state)
 		pwrdm_set_next_pwrst(per_pd, per_next_state);
 
-	new_state_idx = next_valid_state(dev, drv, index);
-
-select_state:
 	ret = omap3_enter_idle(dev, drv, new_state_idx);
 
 	/* Restore original PER state if it was modified */
@@ -286,7 +269,7 @@ struct cpuidle_driver omap3_idle_driver = {
 	.owner = 	THIS_MODULE,
 	.states = {
 		{
-			.enter		  = omap3_enter_idle,
+			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 2 + 2,
 			.target_residency = 5,
 			.flags		  = CPUIDLE_FLAG_TIME_VALID,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 71651e20a43..c00c68961bb 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -27,7 +27,6 @@
 
 #include "iomap.h"
 #include <plat/board.h>
-#include <plat/mmc.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -603,112 +602,6 @@ static inline void omap_init_aes(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
-							*mmc_controller)
-{
-	if ((mmc_controller->slots[0].switch_pin > 0) && \
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if ((mmc_controller->slots[0].gpio_wp > 0) && \
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
-
-	omap_mux_init_signal("sdmmc_cmd", 0);
-	omap_mux_init_signal("sdmmc_clki", 0);
-	omap_mux_init_signal("sdmmc_clko", 0);
-	omap_mux_init_signal("sdmmc_dat0", 0);
-	omap_mux_init_signal("sdmmc_dat_dir0", 0);
-	omap_mux_init_signal("sdmmc_cmd_dir", 0);
-	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
-		omap_mux_init_signal("sdmmc_dat1", 0);
-		omap_mux_init_signal("sdmmc_dat2", 0);
-		omap_mux_init_signal("sdmmc_dat3", 0);
-		omap_mux_init_signal("sdmmc_dat_dir1", 0);
-		omap_mux_init_signal("sdmmc_dat_dir2", 0);
-		omap_mux_init_signal("sdmmc_dat_dir3", 0);
-	}
-
-	/*
-	 * Use internal loop-back in MMC/SDIO Module Input Clock
-	 * selection
-	 */
-	if (mmc_controller->slots[0].internal_clock) {
-		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-		v |= (1 << 24);
-		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-	}
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	int id = 0;
-	char *oh_name = "msdi1";
-	char *dev_name = "mmci-omap";
-
-	if (!mmc_data[0]) {
-		pr_err("%s fails: Incomplete platform data\n", __func__);
-		return;
-	}
-
-	omap242x_mmc_mux(mmc_data[0]);
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return;
-	}
-	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
-				 sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
-	if (IS_ERR(pdev))
-		WARN(1, "Can'd build omap_device for %s:%s.\n",
-					dev_name, oh->name);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#define OMAP_HDQ_BASE	0x480B2000
-static struct resource omap_hdq_resources[] = {
-	{
-		.start		= OMAP_HDQ_BASE,
-		.end		= OMAP_HDQ_BASE + 0x1C,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_24XX_HDQ_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-static struct platform_device omap_hdq_dev = {
-	.name = "omap_hdq",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-	.num_resources	= ARRAY_SIZE(omap_hdq_resources),
-	.resource	= omap_hdq_resources,
-};
-static inline void omap_hdq_init(void)
-{
-	if (cpu_is_omap2420())
-		return;
-
-	platform_device_register(&omap_hdq_dev);
-}
-#else
-static inline void omap_hdq_init(void) {}
-#endif
-
-/*---------------------------------------------------------------------------*/
-
 #if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
 	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -753,7 +646,6 @@ static int __init omap2_init_devices(void)
 		omap_init_mcspi();
 	}
 	omap_init_pmu();
-	omap_hdq_init();
 	omap_init_sti();
 	omap_init_sham();
 	omap_init_aes();
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index 297ebe03f09..cdd6dda0382 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -22,7 +22,13 @@
  * 02110-1301 USA
  */
 
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
 #include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 #include <plat/hdq1w.h>
 
 #include "common.h"
@@ -70,3 +76,23 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+static int __init omap_init_hdq(void)
+{
+	int id = -1;
+	struct platform_device *pdev;
+	struct omap_hwmod *oh;
+	char *oh_name = "hdq1w";
+	char *devname = "omap_hdq";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh)
+		return 0;
+
+	pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
+	     devname, oh->name);
+
+	return 0;
+}
+arch_initcall(omap_init_hdq);
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index ef2a6924731..fb5bc6cf377 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -22,11 +22,15 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/err.h>
 
 #include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 #include <plat/mmc.h>
 
 #include "common.h"
+#include "control.h"
+#include "mux.h"
 
 /*
  * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
@@ -86,3 +90,72 @@ int omap_msdi_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
+				    *mmc_controller)
+{
+	if ((mmc_controller->slots[0].switch_pin > 0) && \
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+					OMAP_PIN_INPUT_PULLUP);
+	if ((mmc_controller->slots[0].gpio_wp > 0) && \
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+					OMAP_PIN_INPUT_PULLUP);
+
+	omap_mux_init_signal("sdmmc_cmd", 0);
+	omap_mux_init_signal("sdmmc_clki", 0);
+	omap_mux_init_signal("sdmmc_clko", 0);
+	omap_mux_init_signal("sdmmc_dat0", 0);
+	omap_mux_init_signal("sdmmc_dat_dir0", 0);
+	omap_mux_init_signal("sdmmc_cmd_dir", 0);
+	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
+		omap_mux_init_signal("sdmmc_dat1", 0);
+		omap_mux_init_signal("sdmmc_dat2", 0);
+		omap_mux_init_signal("sdmmc_dat3", 0);
+		omap_mux_init_signal("sdmmc_dat_dir1", 0);
+		omap_mux_init_signal("sdmmc_dat_dir2", 0);
+		omap_mux_init_signal("sdmmc_dat_dir3", 0);
+	}
+
+	/*
+	 * Use internal loop-back in MMC/SDIO Module Input Clock
+	 * selection
+	 */
+	if (mmc_controller->slots[0].internal_clock) {
+		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+		v |= (1 << 24);
+		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+	}
+}
+
+void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+	struct platform_device *pdev;
+	struct omap_hwmod *oh;
+	int id = 0;
+	char *oh_name = "msdi1";
+	char *dev_name = "mmci-omap";
+
+	if (!mmc_data[0]) {
+		pr_err("%s fails: Incomplete platform data\n", __func__);
+		return;
+	}
+
+	omap242x_mmc_mux(mmc_data[0]);
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return;
+	}
+	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+				 sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+	if (IS_ERR(pdev))
+		WARN(1, "Can'd build omap_device for %s:%s.\n",
+					dev_name, oh->name);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 13670aa84e5..e35a86bf4e1 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -255,7 +255,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 		return -ENXIO;
 	}
 
-	pwrdm_pre_transition();
+	pwrdm_pre_transition(NULL);
 
 	/*
 	 * Check MPUSS next state and save interrupt controller if needed.
@@ -287,7 +287,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	wakeup_cpu = smp_processor_id();
 	set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
 
-	pwrdm_post_transition();
+	pwrdm_post_transition(NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 3f21568f175..6ca8e519968 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -153,6 +153,7 @@
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "mux.h"
+#include "pm.h"
 
 /* Maximum microseconds to wait for OMAP module to softreset */
 #define MAX_MODULE_SOFTRESET_WAIT	10000
@@ -197,6 +198,9 @@ static LIST_HEAD(omap_hwmod_list);
 /* mpu_oh: used to add/remove MPU initiator from sleepdep list */
 static struct omap_hwmod *mpu_oh;
 
+/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
+static DEFINE_SPINLOCK(io_chain_lock);
+
 /*
  * linkspace: ptr to a buffer that struct omap_hwmod_link records are
  * allocated from - used to reduce the number of small memory
@@ -1759,6 +1763,32 @@ static int _reset(struct omap_hwmod *oh)
 }
 
 /**
+ * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
+ *
+ * Call the appropriate PRM function to clear any logged I/O chain
+ * wakeups and to reconfigure the chain.  This apparently needs to be
+ * done upon every mux change.  Since hwmods can be concurrently
+ * enabled and idled, hold a spinlock around the I/O chain
+ * reconfiguration sequence.  No return value.
+ *
+ * XXX When the PRM code is moved to drivers, this function can be removed,
+ * as the PRM infrastructure should abstract this.
+ */
+static void _reconfigure_io_chain(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&io_chain_lock, flags);
+
+	if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl())
+		omap3xxx_prm_reconfigure_io_chain();
+	else if (cpu_is_omap44xx())
+		omap44xx_prm_reconfigure_io_chain();
+
+	spin_unlock_irqrestore(&io_chain_lock, flags);
+}
+
+/**
  * _enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
@@ -1814,8 +1844,10 @@ static int _enable(struct omap_hwmod *oh)
 	/* Mux pins for device runtime if populated */
 	if (oh->mux && (!oh->mux->enabled ||
 			((oh->_state == _HWMOD_STATE_IDLE) &&
-			 oh->mux->pads_dynamic)))
+			 oh->mux->pads_dynamic))) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
+		_reconfigure_io_chain();
+	}
 
 	_add_initiator_dep(oh, mpu_oh);
 
@@ -1907,8 +1939,10 @@ static int _idle(struct omap_hwmod *oh)
 		clkdm_hwmod_disable(oh->clkdm, oh);
 
 	/* Mux pins for device idle if populated */
-	if (oh->mux && oh->mux->pads_dynamic)
+	if (oh->mux && oh->mux->pads_dynamic) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
+		_reconfigure_io_chain();
+	}
 
 	oh->_state = _HWMOD_STATE_IDLE;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index cdb9637aab1..c9e38200216 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,6 +14,8 @@
  *
  * XXX these should be marked initdata for multi-OMAP kernels
  */
+#include <linux/power/smartreflex.h>
+
 #include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
 #include <plat/cpu.h>
@@ -29,8 +31,6 @@
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
@@ -1357,7 +1357,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
 };
 
 static struct omap_hwmod omap34xx_sr1_hwmod = {
-	.name		= "sr1",
+	.name		= "smartreflex_mpu_iva",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -1375,7 +1375,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 };
 
 static struct omap_hwmod omap36xx_sr1_hwmod = {
-	.name		= "sr1",
+	.name		= "smartreflex_mpu_iva",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -1402,7 +1402,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
 };
 
 static struct omap_hwmod omap34xx_sr2_hwmod = {
-	.name		= "sr2",
+	.name		= "smartreflex_core",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {
@@ -1420,7 +1420,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 };
 
 static struct omap_hwmod omap36xx_sr2_hwmod = {
-	.name		= "sr2",
+	.name		= "smartreflex_core",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 5c2ce7e7783..242aee498ce 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/io.h>
+#include <linux/power/smartreflex.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
@@ -32,8 +33,6 @@
 #include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index ab04d3bba2e..686137d164d 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -101,7 +101,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
 static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
 
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
 extern void omap_enable_smartreflex_on_init(void);
 #else
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 9b463c98750..e4fc88c65db 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -70,34 +70,6 @@ void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
-
-static void omap3_enable_io_chain(void)
-{
-	int timeout = 0;
-
-	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				   PM_WKEN);
-	/* Do a readback to assure write has been done */
-	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
-	while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
-		 OMAP3430_ST_IO_CHAIN_MASK)) {
-		timeout++;
-		if (timeout > 1000) {
-			pr_err("Wake up daisy chain activation failed.\n");
-			return;
-		}
-		omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					   WKUP_MOD, PM_WKEN);
-	}
-}
-
-static void omap3_disable_io_chain(void)
-{
-	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				     PM_WKEN);
-}
 
 static void omap3_core_save_context(void)
 {
@@ -299,24 +271,22 @@ void omap_sram_idle(void)
 	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (omap3_has_io_wakeup() &&
-	    (per_next_state < PWRDM_POWER_ON ||
-	     core_next_state < PWRDM_POWER_ON)) {
-		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
-		if (omap3_has_io_chain_ctrl())
-			omap3_enable_io_chain();
-	}
 
-	pwrdm_pre_transition();
+	if (mpu_next_state < PWRDM_POWER_ON) {
+		pwrdm_pre_transition(mpu_pwrdm);
+		pwrdm_pre_transition(neon_pwrdm);
+	}
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
+		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
+		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -369,26 +339,20 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
+		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
-	pwrdm_post_transition();
-
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON)
+	if (per_next_state < PWRDM_POWER_ON) {
 		omap2_gpio_resume_after_idle();
-
-	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (omap3_has_io_wakeup() &&
-	    (per_next_state < PWRDM_POWER_ON ||
-	     core_next_state < PWRDM_POWER_ON)) {
-		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
-					     PM_WKEN);
-		if (omap3_has_io_chain_ctrl())
-			omap3_disable_io_chain();
+		pwrdm_post_transition(per_pwrdm);
 	}
 
-	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+	if (mpu_next_state < PWRDM_POWER_ON) {
+		pwrdm_post_transition(mpu_pwrdm);
+		pwrdm_post_transition(neon_pwrdm);
+	}
 }
 
 static void omap3_pm_idle(void)
@@ -754,7 +718,6 @@ int __init omap3_pm_init(void)
 	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
 	per_pwrdm = pwrdm_lookup("per_pwrdm");
 	core_pwrdm = pwrdm_lookup("core_pwrdm");
-	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
 	neon_clkdm = clkdm_lookup("neon_clkdm");
 	mpu_clkdm = clkdm_lookup("mpu_clkdm");
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2f963f702a0..69b36e185e9 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -985,15 +985,23 @@ int pwrdm_state_switch(struct powerdomain *pwrdm)
 	return ret;
 }
 
-int pwrdm_pre_transition(void)
+int pwrdm_pre_transition(struct powerdomain *pwrdm)
 {
-	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+	if (pwrdm)
+		_pwrdm_pre_transition_cb(pwrdm, NULL);
+	else
+		pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+
 	return 0;
 }
 
-int pwrdm_post_transition(void)
+int pwrdm_post_transition(struct powerdomain *pwrdm)
 {
-	pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+	if (pwrdm)
+		_pwrdm_post_transition_cb(pwrdm, NULL);
+	else
+		pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index a8a95184243..baee90608d1 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -230,8 +230,8 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
 int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
+int pwrdm_pre_transition(struct powerdomain *pwrdm);
+int pwrdm_post_transition(struct powerdomain *pwrdm);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
 int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
 bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index d5ae4e234bb..e5f0503a68b 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -410,6 +410,14 @@
  */
 #define MAX_MODULE_HARDRESET_WAIT		10000
 
+/*
+ * Maximum time(us) it takes to output the signal WUCLKOUT of the last
+ * pad of the I/O ring after asserting WUCLKIN high.  Tero measured
+ * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4
+ * microseconds on OMAP4, so this timeout may be too high.
+ */
+#define MAX_IOPAD_LATCH_TIME			100
+
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
 extern void __iomem *cm_base;
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 21cb74003a5..a0309dea679 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -302,11 +302,59 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 }
 
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKEN);
+
+	omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			  OMAP3430_ST_IO_CHAIN_MASK,
+			  MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKST);
+
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+	if (omap3_has_io_wakeup())
+		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+					   PM_WKEN);
+}
+
 static int __init omap3xxx_prcm_init(void)
 {
 	int ret = 0;
 
 	if (cpu_is_omap34xx()) {
+		omap3xxx_prm_enable_io_wakeup();
 		ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 		if (!ret)
 			irq_set_status_flags(omap_prcm_event_to_irq("io"),
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index f7bb57fff41..c19d249b481 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -253,12 +253,15 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
 /* PRM interrupt-related functions */
 extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 extern void omap3xxx_prm_ocp_barrier(void);
 extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-#endif
+
+#endif /* __ASSEMBLER */
 
 /*
  * Bits common to specific registers
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index f106d21ff58..bb727c2d933 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -233,10 +233,71 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask)
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 }
 
+/**
+ * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
+ * No return value. XXX Are the final two steps necessary?
+ */
+void omap44xx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	/* Trigger WUCLKIN enable */
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
+				    OMAP4430_WUCLK_CTRL_MASK,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+		   OMAP4430_WUCLK_STATUS_MASK) >>
+		  OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+		MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	/* Trigger WUCLKIN disable */
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+		   OMAP4430_WUCLK_STATUS_MASK) >>
+		  OMAP4430_WUCLK_STATUS_SHIFT) == 0),
+		MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line deassertion timed out\n");
+
+	return;
+}
+
+/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+}
+
 static int __init omap4xxx_prcm_init(void)
 {
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx()) {
+		omap44xx_prm_enable_io_wakeup();
 		return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+	}
 	return 0;
 }
 subsys_initcall(omap4xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7978092946d..ee72ae6bd8c 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -763,6 +763,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
+extern void omap44xx_prm_reconfigure_io_chain(void);
+
 /* PRM interrupt-related functions */
 extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
 extern void omap44xx_prm_ocp_barrier(void);
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 955566eefac..1da8f03c479 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -11,36 +11,37 @@
  * published by the Free Software Foundation.
  */
 
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
+#include "voltage.h"
 
-static int sr_class3_enable(struct voltagedomain *voltdm)
+static int sr_class3_enable(struct omap_sr *sr)
 {
-	unsigned long volt = voltdm_get_voltage(voltdm);
+	unsigned long volt = voltdm_get_voltage(sr->voltdm);
 
 	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
-				__func__, voltdm->name);
+		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+				__func__, sr->name);
 		return -ENODATA;
 	}
 
-	omap_vp_enable(voltdm);
-	return sr_enable(voltdm, volt);
+	omap_vp_enable(sr->voltdm);
+	return sr_enable(sr->voltdm, volt);
 }
 
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
 {
-	sr_disable_errgen(voltdm);
-	omap_vp_disable(voltdm);
-	sr_disable(voltdm);
+	sr_disable_errgen(sr->voltdm);
+	omap_vp_disable(sr->voltdm);
+	sr_disable(sr->voltdm);
 	if (is_volt_reset)
-		voltdm_reset(voltdm);
+		voltdm_reset(sr->voltdm);
 
 	return 0;
 }
 
-static int sr_class3_configure(struct voltagedomain *voltdm)
+static int sr_class3_configure(struct omap_sr *sr)
 {
-	return sr_configure_errgen(voltdm);
+	return sr_configure_errgen(sr->voltdm);
 }
 
 /* SR class3 structure */
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
deleted file mode 100644
index 008fbd7b935..00000000000
--- a/arch/arm/mach-omap2/smartreflex.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * OMAP SmartReflex Voltage Control
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#include "common.h"
-
-#include "pm.h"
-#include "smartreflex.h"
-
-#define SMARTREFLEX_NAME_LEN	16
-#define NVALUE_NAME_LEN		40
-#define SR_DISABLE_TIMEOUT	200
-
-struct omap_sr {
-	struct list_head		node;
-	struct platform_device		*pdev;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-	struct dentry			*dbg_dir;
-	unsigned int			irq;
-	int				srid;
-	int				ip_type;
-	int				nvalue_count;
-	bool				autocomp_active;
-	u32				clk_length;
-	u32				err_weight;
-	u32				err_minlimit;
-	u32				err_maxlimit;
-	u32				accum_data;
-	u32				senn_avgweight;
-	u32				senp_avgweight;
-	u32				senp_mod;
-	u32				senn_mod;
-	void __iomem			*base;
-};
-
-/* sr_list contains all the instances of smartreflex module */
-static LIST_HEAD(sr_list);
-
-static struct omap_sr_class_data *sr_class;
-static struct omap_sr_pmic_data *sr_pmic_data;
-static struct dentry		*sr_dbg_dir;
-
-static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
-{
-	__raw_writel(value, (sr->base + offset));
-}
-
-static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
-					u32 value)
-{
-	u32 reg_val;
-
-	/*
-	 * Smartreflex error config register is special as it contains
-	 * certain status bits which if written a 1 into means a clear
-	 * of those bits. So in order to make sure no accidental write of
-	 * 1 happens to those status bits, do a clear of them in the read
-	 * value. This mean this API doesn't rewrite values in these bits
-	 * if they are currently set, but does allow the caller to write
-	 * those bits.
-	 */
-	if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
-		mask |= ERRCONFIG_STATUS_V1_MASK;
-	else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
-		mask |= ERRCONFIG_VPBOUNDINTST_V2;
-
-	reg_val = __raw_readl(sr->base + offset);
-	reg_val &= ~mask;
-
-	value &= mask;
-
-	reg_val |= value;
-
-	__raw_writel(reg_val, (sr->base + offset));
-}
-
-static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
-{
-	return __raw_readl(sr->base + offset);
-}
-
-static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr_info;
-
-	if (!voltdm) {
-		pr_err("%s: Null voltage domain passed!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	list_for_each_entry(sr_info, &sr_list, node) {
-		if (voltdm == sr_info->voltdm)
-			return sr_info;
-	}
-
-	return ERR_PTR(-ENODATA);
-}
-
-static irqreturn_t sr_interrupt(int irq, void *data)
-{
-	struct omap_sr *sr_info = data;
-	u32 status = 0;
-
-	switch (sr_info->ip_type) {
-	case SR_TYPE_V1:
-		/* Read the status bits */
-		status = sr_read_reg(sr_info, ERRCONFIG_V1);
-
-		/* Clear them by writing back */
-		sr_write_reg(sr_info, ERRCONFIG_V1, status);
-		break;
-	case SR_TYPE_V2:
-		/* Read the status bits */
-		status = sr_read_reg(sr_info, IRQSTATUS);
-
-		/* Clear them by writing back */
-		sr_write_reg(sr_info, IRQSTATUS, status);
-		break;
-	default:
-		dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
-			sr_info->ip_type);
-		return IRQ_NONE;
-	}
-
-	if (sr_class->notify)
-		sr_class->notify(sr_info->voltdm, status);
-
-	return IRQ_HANDLED;
-}
-
-static void sr_set_clk_length(struct omap_sr *sr)
-{
-	struct clk *sys_ck;
-	u32 sys_clk_speed;
-
-	if (cpu_is_omap34xx())
-		sys_ck = clk_get(NULL, "sys_ck");
-	else
-		sys_ck = clk_get(NULL, "sys_clkin_ck");
-
-	if (IS_ERR(sys_ck)) {
-		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
-			__func__);
-		return;
-	}
-
-	sys_clk_speed = clk_get_rate(sys_ck);
-	clk_put(sys_ck);
-
-	switch (sys_clk_speed) {
-	case 12000000:
-		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
-		break;
-	case 13000000:
-		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
-		break;
-	case 19200000:
-		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
-		break;
-	case 26000000:
-		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
-		break;
-	case 38400000:
-		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
-			__func__, sys_clk_speed);
-		break;
-	}
-}
-
-static void sr_set_regfields(struct omap_sr *sr)
-{
-	/*
-	 * For time being these values are defined in smartreflex.h
-	 * and populated during init. May be they can be moved to board
-	 * file or pmic specific data structure. In that case these structure
-	 * fields will have to be populated using the pdata or pmic structure.
-	 */
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
-		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
-		sr->accum_data = OMAP3430_SR_ACCUMDATA;
-		if (!(strcmp(sr->voltdm->name, "mpu"))) {
-			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
-			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
-		} else {
-			sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
-			sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
-		}
-	}
-}
-
-static void sr_start_vddautocomp(struct omap_sr *sr)
-{
-	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
-		dev_warn(&sr->pdev->dev,
-			"%s: smartreflex class driver not registered\n",
-			__func__);
-		return;
-	}
-
-	if (!sr_class->enable(sr->voltdm))
-		sr->autocomp_active = true;
-}
-
-static void sr_stop_vddautocomp(struct omap_sr *sr)
-{
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev,
-			"%s: smartreflex class driver not registered\n",
-			__func__);
-		return;
-	}
-
-	if (sr->autocomp_active) {
-		sr_class->disable(sr->voltdm, 1);
-		sr->autocomp_active = false;
-	}
-}
-
-/*
- * This function handles the intializations which have to be done
- * only when both sr device and class driver regiter has
- * completed. This will be attempted to be called from both sr class
- * driver register and sr device intializtion API's. Only one call
- * will ultimately succeed.
- *
- * Currently this function registers interrupt handler for a particular SR
- * if smartreflex class driver is already registered and has
- * requested for interrupts and the SR interrupt line in present.
- */
-static int sr_late_init(struct omap_sr *sr_info)
-{
-	char *name;
-	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
-	struct resource *mem;
-	int ret = 0;
-
-	if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
-		name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
-		if (name == NULL) {
-			ret = -ENOMEM;
-			goto error;
-		}
-		ret = request_irq(sr_info->irq, sr_interrupt,
-				0, name, sr_info);
-		if (ret)
-			goto error;
-		disable_irq(sr_info->irq);
-	}
-
-	if (pdata && pdata->enable_on_init)
-		sr_start_vddautocomp(sr_info);
-
-	return ret;
-
-error:
-	iounmap(sr_info->base);
-	mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-	list_del(&sr_info->node);
-	dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
-		"interrupt handler. Smartreflex will"
-		"not function as desired\n", __func__);
-	kfree(name);
-	kfree(sr_info);
-
-	return ret;
-}
-
-static void sr_v1_disable(struct omap_sr *sr)
-{
-	int timeout = 0;
-	int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
-			ERRCONFIG_MCUBOUNDINTST;
-
-	/* Enable MCUDisableAcknowledge interrupt */
-	sr_modify_reg(sr, ERRCONFIG_V1,
-			ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
-
-	/* SRCONFIG - disable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
-
-	/* Disable all other SR interrupts and clear the status as needed */
-	if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
-		errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
-	sr_modify_reg(sr, ERRCONFIG_V1,
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
-			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
-			errconf_val);
-
-	/*
-	 * Wait for SR to be disabled.
-	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
-	 */
-	omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
-			ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
-			timeout);
-
-	if (timeout >= SR_DISABLE_TIMEOUT)
-		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
-			__func__);
-
-	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
-			ERRCONFIG_MCUDISACKINTST);
-}
-
-static void sr_v2_disable(struct omap_sr *sr)
-{
-	int timeout = 0;
-
-	/* Enable MCUDisableAcknowledge interrupt */
-	sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
-
-	/* SRCONFIG - disable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
-
-	/*
-	 * Disable all other SR interrupts and clear the status
-	 * write to status register ONLY on need basis - only if status
-	 * is set.
-	 */
-	if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
-		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
-			ERRCONFIG_VPBOUNDINTST_V2);
-	else
-		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
-				0x0);
-	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
-			IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT));
-	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
-			IRQSTATUS_MCVALIDINT |
-			IRQSTATUS_MCBOUNDSINT));
-
-	/*
-	 * Wait for SR to be disabled.
-	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
-	 */
-	omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
-			IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
-			timeout);
-
-	if (timeout >= SR_DISABLE_TIMEOUT)
-		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
-			__func__);
-
-	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
-	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
-}
-
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
-{
-	int i;
-
-	if (!sr->nvalue_table) {
-		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
-			__func__);
-		return 0;
-	}
-
-	for (i = 0; i < sr->nvalue_count; i++) {
-		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
-			return sr->nvalue_table[i].nvalue;
-	}
-
-	return 0;
-}
-
-/* Public Functions */
-
-/**
- * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
- *			 error generator module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * configure the error generator module inside the smartreflex module.
- * SR settings if using the ERROR module inside Smartreflex.
- * SR CLASS 3 by default uses only the ERROR module where as
- * SR CLASS 2 can choose between ERROR module and MINMAXAVG
- * module. Returns 0 on success and error value in case of failure.
- */
-int sr_configure_errgen(struct voltagedomain *voltdm)
-{
-	u32 sr_config, sr_errconfig, errconfig_offs;
-	u32 vpboundint_en, vpboundint_st;
-	u32 senp_en = 0, senn_en = 0;
-	u8 senp_shift, senn_shift;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	if (!sr->clk_length)
-		sr_set_clk_length(sr);
-
-	senp_en = sr->senp_mod;
-	senn_en = sr->senn_mod;
-
-	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
-		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_config |= SRCONFIG_DELAYCTRL;
-		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-		errconfig_offs = ERRCONFIG_V1;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-		break;
-	case SR_TYPE_V2:
-		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-		errconfig_offs = ERRCONFIG_V2;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
-	sr_write_reg(sr, SRCONFIG, sr_config);
-	sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
-		(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
-		(sr->err_minlimit <<  ERRCONFIG_ERRMINLIMIT_SHIFT);
-	sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
-		SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
-		sr_errconfig);
-
-	/* Enabling the interrupts if the ERROR module is used */
-	sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
-		      vpboundint_en);
-
-	return 0;
-}
-
-/**
- * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * disable the error generator module inside the smartreflex module.
- *
- * Returns 0 on success and error value in case of failure.
- */
-int sr_disable_errgen(struct voltagedomain *voltdm)
-{
-	u32 errconfig_offs;
-	u32 vpboundint_en, vpboundint_st;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		errconfig_offs = ERRCONFIG_V1;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-		break;
-	case SR_TYPE_V2:
-		errconfig_offs = ERRCONFIG_V2;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Disable the interrupts of ERROR module */
-	sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
-
-	/* Disable the Sensor and errorgen */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
-
-	return 0;
-}
-
-/**
- * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
- *			 minmaxavg module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * configure the minmaxavg module inside the smartreflex module.
- * SR settings if using the ERROR module inside Smartreflex.
- * SR CLASS 3 by default uses only the ERROR module where as
- * SR CLASS 2 can choose between ERROR module and MINMAXAVG
- * module. Returns 0 on success and error value in case of failure.
- */
-int sr_configure_minmax(struct voltagedomain *voltdm)
-{
-	u32 sr_config, sr_avgwt;
-	u32 senp_en = 0, senn_en = 0;
-	u8 senp_shift, senn_shift;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	if (!sr->clk_length)
-		sr_set_clk_length(sr);
-
-	senp_en = sr->senp_mod;
-	senn_en = sr->senn_mod;
-
-	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
-		SRCONFIG_SENENABLE |
-		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_config |= SRCONFIG_DELAYCTRL;
-		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-		break;
-	case SR_TYPE_V2:
-		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
-	sr_write_reg(sr, SRCONFIG, sr_config);
-	sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
-		(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
-	sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
-
-	/*
-	 * Enabling the interrupts if MINMAXAVG module is used.
-	 * TODO: check if all the interrupts are mandatory
-	 */
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_modify_reg(sr, ERRCONFIG_V1,
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
-			ERRCONFIG_MCUBOUNDINTEN),
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
-			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
-			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
-		break;
-	case SR_TYPE_V2:
-		sr_write_reg(sr, IRQSTATUS,
-			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
-			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
-		sr_write_reg(sr, IRQENABLE_SET,
-			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * sr_enable() - Enables the smartreflex module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- * @volt:	The voltage at which the Voltage domain associated with
- *		the smartreflex module is operating at.
- *		This is required only to program the correct Ntarget value.
- *
- * This API is to be called from the smartreflex class driver to
- * enable a smartreflex module. Returns 0 on success. Returns error
- * value if the voltage passed is wrong or if ntarget value is wrong.
- */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
-{
-	struct omap_volt_data *volt_data;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-	u32 nvalue_reciprocal;
-	int ret;
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
-
-	if (IS_ERR(volt_data)) {
-		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
-			"for nominal voltage %ld\n", __func__, volt);
-		return PTR_ERR(volt_data);
-	}
-
-	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
-
-	if (!nvalue_reciprocal) {
-		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
-			__func__, volt);
-		return -ENODATA;
-	}
-
-	/* errminlimit is opp dependent and hence linked to voltage */
-	sr->err_minlimit = volt_data->sr_errminlimit;
-
-	pm_runtime_get_sync(&sr->pdev->dev);
-
-	/* Check if SR is already enabled. If yes do nothing */
-	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
-		return 0;
-
-	/* Configure SR */
-	ret = sr_class->configure(voltdm);
-	if (ret)
-		return ret;
-
-	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
-
-	/* SRCONFIG - enable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
-	return 0;
-}
-
-/**
- * sr_disable() - Disables the smartreflex module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * disable a smartreflex module.
- */
-void sr_disable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	/* Check if SR clocks are already disabled. If yes do nothing */
-	if (pm_runtime_suspended(&sr->pdev->dev))
-		return;
-
-	/*
-	 * Disable SR if only it is indeed enabled. Else just
-	 * disable the clocks.
-	 */
-	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
-		switch (sr->ip_type) {
-		case SR_TYPE_V1:
-			sr_v1_disable(sr);
-			break;
-		case SR_TYPE_V2:
-			sr_v2_disable(sr);
-			break;
-		default:
-			dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
-				sr->ip_type);
-		}
-	}
-
-	pm_runtime_put_sync_suspend(&sr->pdev->dev);
-}
-
-/**
- * sr_register_class() - API to register a smartreflex class parameters.
- * @class_data:	The structure containing various sr class specific data.
- *
- * This API is to be called by the smartreflex class driver to register itself
- * with the smartreflex driver during init. Returns 0 on success else the
- * error value.
- */
-int sr_register_class(struct omap_sr_class_data *class_data)
-{
-	struct omap_sr *sr_info;
-
-	if (!class_data) {
-		pr_warning("%s:, Smartreflex class data passed is NULL\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	if (sr_class) {
-		pr_warning("%s: Smartreflex class driver already registered\n",
-			__func__);
-		return -EBUSY;
-	}
-
-	sr_class = class_data;
-
-	/*
-	 * Call into late init to do intializations that require
-	 * both sr driver and sr class driver to be initiallized.
-	 */
-	list_for_each_entry(sr_info, &sr_list, node)
-		sr_late_init(sr_info);
-
-	return 0;
-}
-
-/**
- * omap_sr_enable() -  API to enable SR clocks and to call into the
- *			registered smartreflex class enable API.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to enable
- * a particular smartreflex module. This API will do the initial
- * configurations to turn on the smartreflex module and in turn call
- * into the registered smartreflex class enable API.
- */
-void omap_sr_enable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->enable(voltdm);
-}
-
-/**
- * omap_sr_disable() - API to disable SR without resetting the voltage
- *			processor voltage
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to disable
- * a particular smartreflex module. This API will in turn call
- * into the registered smartreflex class disable API. This API will tell
- * the smartreflex class disable not to reset the VP voltage after
- * disabling smartreflex.
- */
-void omap_sr_disable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->disable(voltdm, 0);
-}
-
-/**
- * omap_sr_disable_reset_volt() - API to disable SR and reset the
- *				voltage processor voltage
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to disable
- * a particular smartreflex module. This API will in turn call
- * into the registered smartreflex class disable API. This API will tell
- * the smartreflex class disable to reset the VP voltage after
- * disabling smartreflex.
- */
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->disable(voltdm, 1);
-}
-
-/**
- * omap_sr_register_pmic() - API to register pmic specific info.
- * @pmic_data:	The structure containing pmic specific data.
- *
- * This API is to be called from the PMIC specific code to register with
- * smartreflex driver pmic specific info. Currently the only info required
- * is the smartreflex init on the PMIC side.
- */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
-{
-	if (!pmic_data) {
-		pr_warning("%s: Trying to register NULL PMIC data structure"
-			"with smartreflex\n", __func__);
-		return;
-	}
-
-	sr_pmic_data = pmic_data;
-}
-
-/* PM Debug FS entries to enable and disable smartreflex. */
-static int omap_sr_autocomp_show(void *data, u64 *val)
-{
-	struct omap_sr *sr_info = data;
-
-	if (!sr_info) {
-		pr_warning("%s: omap_sr struct not found\n", __func__);
-		return -EINVAL;
-	}
-
-	*val = sr_info->autocomp_active;
-
-	return 0;
-}
-
-static int omap_sr_autocomp_store(void *data, u64 val)
-{
-	struct omap_sr *sr_info = data;
-
-	if (!sr_info) {
-		pr_warning("%s: omap_sr struct not found\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Sanity check */
-	if (val > 1) {
-		pr_warning("%s: Invalid argument %lld\n", __func__, val);
-		return -EINVAL;
-	}
-
-	/* control enable/disable only if there is a delta in value */
-	if (sr_info->autocomp_active != val) {
-		if (!val)
-			sr_stop_vddautocomp(sr_info);
-		else
-			sr_start_vddautocomp(sr_info);
-	}
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
-			omap_sr_autocomp_store, "%llu\n");
-
-static int __init omap_sr_probe(struct platform_device *pdev)
-{
-	struct omap_sr *sr_info;
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct resource *mem, *irq;
-	struct dentry *nvalue_dir;
-	struct omap_volt_data *volt_data;
-	int i, ret = 0;
-	char *name;
-
-	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
-	if (!sr_info) {
-		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, sr_info);
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		ret = -EINVAL;
-		goto err_free_devinfo;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
-		ret = -ENODEV;
-		goto err_free_devinfo;
-	}
-
-	mem = request_mem_region(mem->start, resource_size(mem),
-					dev_name(&pdev->dev));
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem region\n", __func__);
-		ret = -EBUSY;
-		goto err_free_devinfo;
-	}
-
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_irq_safe(&pdev->dev);
-
-	sr_info->pdev = pdev;
-	sr_info->srid = pdev->id;
-	sr_info->voltdm = pdata->voltdm;
-	sr_info->nvalue_table = pdata->nvalue_table;
-	sr_info->nvalue_count = pdata->nvalue_count;
-	sr_info->senn_mod = pdata->senn_mod;
-	sr_info->senp_mod = pdata->senp_mod;
-	sr_info->autocomp_active = false;
-	sr_info->ip_type = pdata->ip_type;
-	sr_info->base = ioremap(mem->start, resource_size(mem));
-	if (!sr_info->base) {
-		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
-		ret = -ENOMEM;
-		goto err_release_region;
-	}
-
-	if (irq)
-		sr_info->irq = irq->start;
-
-	sr_set_clk_length(sr_info);
-	sr_set_regfields(sr_info);
-
-	list_add(&sr_info->node, &sr_list);
-
-	/*
-	 * Call into late init to do intializations that require
-	 * both sr driver and sr class driver to be initiallized.
-	 */
-	if (sr_class) {
-		ret = sr_late_init(sr_info);
-		if (ret) {
-			pr_warning("%s: Error in SR late init\n", __func__);
-			goto err_iounmap;
-		}
-	}
-
-	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-	if (!sr_dbg_dir) {
-		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
-		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
-			ret = PTR_ERR(sr_dbg_dir);
-			pr_err("%s:sr debugfs dir creation failed(%d)\n",
-				__func__, ret);
-			goto err_iounmap;
-		}
-	}
-
-	name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
-	if (!name) {
-		dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_iounmap;
-	}
-	sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
-	kfree(name);
-	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
-			__func__);
-		ret = PTR_ERR(sr_info->dbg_dir);
-		goto err_iounmap;
-	}
-
-	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
-			sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
-	(void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_weight);
-	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_maxlimit);
-	(void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_minlimit);
-
-	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
-	if (IS_ERR_OR_NULL(nvalue_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
-			"for n-values\n", __func__);
-		ret = PTR_ERR(nvalue_dir);
-		goto err_debugfs;
-	}
-
-	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
-	if (!volt_data) {
-		dev_warn(&pdev->dev, "%s: No Voltage table for the"
-			" corresponding vdd vdd_%s. Cannot create debugfs"
-			"entries for n-values\n",
-			__func__, sr_info->voltdm->name);
-		ret = -ENODATA;
-		goto err_debugfs;
-	}
-
-	for (i = 0; i < sr_info->nvalue_count; i++) {
-		char name[NVALUE_NAME_LEN + 1];
-
-		snprintf(name, sizeof(name), "volt_%d",
-			 volt_data[i].volt_nominal);
-		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
-				&(sr_info->nvalue_table[i].nvalue));
-	}
-
-	return ret;
-
-err_debugfs:
-	debugfs_remove_recursive(sr_info->dbg_dir);
-err_iounmap:
-	list_del(&sr_info->node);
-	iounmap(sr_info->base);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
-err_free_devinfo:
-	kfree(sr_info);
-
-	return ret;
-}
-
-static int __devexit omap_sr_remove(struct platform_device *pdev)
-{
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct omap_sr *sr_info;
-	struct resource *mem;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_info = _sr_lookup(pdata->voltdm);
-	if (IS_ERR(sr_info)) {
-		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
-			__func__);
-		return PTR_ERR(sr_info);
-	}
-
-	if (sr_info->autocomp_active)
-		sr_stop_vddautocomp(sr_info);
-	if (sr_info->dbg_dir)
-		debugfs_remove_recursive(sr_info->dbg_dir);
-
-	list_del(&sr_info->node);
-	iounmap(sr_info->base);
-	kfree(sr_info);
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-
-	return 0;
-}
-
-static void __devexit omap_sr_shutdown(struct platform_device *pdev)
-{
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct omap_sr *sr_info;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return;
-	}
-
-	sr_info = _sr_lookup(pdata->voltdm);
-	if (IS_ERR(sr_info)) {
-		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
-			__func__);
-		return;
-	}
-
-	if (sr_info->autocomp_active)
-		sr_stop_vddautocomp(sr_info);
-
-	return;
-}
-
-static struct platform_driver smartreflex_driver = {
-	.remove         = __devexit_p(omap_sr_remove),
-	.shutdown	= __devexit_p(omap_sr_shutdown),
-	.driver		= {
-		.name	= "smartreflex",
-	},
-};
-
-static int __init sr_init(void)
-{
-	int ret = 0;
-
-	/*
-	 * sr_init is a late init. If by then a pmic specific API is not
-	 * registered either there is no need for anything to be done on
-	 * the PMIC side or somebody has forgotten to register a PMIC
-	 * handler. Warn for the second condition.
-	 */
-	if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
-		sr_pmic_data->sr_pmic_init();
-	else
-		pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
-
-	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
-	if (ret) {
-		pr_err("%s: platform driver register failed for SR\n",
-			__func__);
-		return ret;
-	}
-
-	return 0;
-}
-late_initcall(sr_init);
-
-static void __exit sr_exit(void)
-{
-	platform_driver_unregister(&smartreflex_driver);
-}
-module_exit(sr_exit);
-
-MODULE_DESCRIPTION("OMAP Smartreflex Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
deleted file mode 100644
index 5809141171f..00000000000
--- a/arch/arm/mach-omap2/smartreflex.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * OMAP Smartreflex Defines and Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
-
-#include <linux/platform_device.h>
-
-#include "voltage.h"
-
-/*
- * Different Smartreflex IPs version. The v1 is the 65nm version used in
- * OMAP3430. The v2 is the update for the 45nm version of the IP
- * used in OMAP3630 and OMAP4430
- */
-#define SR_TYPE_V1	1
-#define SR_TYPE_V2	2
-
-/* SMART REFLEX REG ADDRESS OFFSET */
-#define SRCONFIG		0x00
-#define SRSTATUS		0x04
-#define SENVAL			0x08
-#define SENMIN			0x0C
-#define SENMAX			0x10
-#define SENAVG			0x14
-#define AVGWEIGHT		0x18
-#define NVALUERECIPROCAL	0x1c
-#define SENERROR_V1		0x20
-#define ERRCONFIG_V1		0x24
-#define IRQ_EOI			0x20
-#define IRQSTATUS_RAW		0x24
-#define IRQSTATUS		0x28
-#define IRQENABLE_SET		0x2C
-#define IRQENABLE_CLR		0x30
-#define SENERROR_V2		0x34
-#define ERRCONFIG_V2		0x38
-
-/* Bit/Shift Positions */
-
-/* SRCONFIG */
-#define SRCONFIG_ACCUMDATA_SHIFT	22
-#define SRCONFIG_SRCLKLENGTH_SHIFT	12
-#define SRCONFIG_SENNENABLE_V1_SHIFT	5
-#define SRCONFIG_SENPENABLE_V1_SHIFT	3
-#define SRCONFIG_SENNENABLE_V2_SHIFT	1
-#define SRCONFIG_SENPENABLE_V2_SHIFT	0
-#define SRCONFIG_CLKCTRL_SHIFT		0
-
-#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
-
-#define SRCONFIG_SRENABLE		BIT(11)
-#define SRCONFIG_SENENABLE		BIT(10)
-#define SRCONFIG_ERRGEN_EN		BIT(9)
-#define SRCONFIG_MINMAXAVG_EN		BIT(8)
-#define SRCONFIG_DELAYCTRL		BIT(2)
-
-/* AVGWEIGHT */
-#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
-#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
-
-/* NVALUERECIPROCAL */
-#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
-#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
-#define NVALUERECIPROCAL_RNSENP_SHIFT	8
-#define NVALUERECIPROCAL_RNSENN_SHIFT	0
-
-/* ERRCONFIG */
-#define ERRCONFIG_ERRWEIGHT_SHIFT	16
-#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
-#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
-
-#define SR_ERRWEIGHT_MASK		(0x07 << 16)
-#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
-#define SR_ERRMINLIMIT_MASK		(0xff << 0)
-
-#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
-#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
-#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
-#define ERRCONFIG_MCUACCUMINTST		BIT(28)
-#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
-#define ERRCONFIG_MCUVALIDINTST		BIT(26)
-#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
-#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
-#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
-#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
-#define ERRCONFIG_MCUDISACKINTST	BIT(22)
-#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
-
-#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
-					ERRCONFIG_MCUACCUMINTST | \
-					ERRCONFIG_MCUVALIDINTST | \
-					ERRCONFIG_MCUBOUNDINTST | \
-					ERRCONFIG_MCUDISACKINTST)
-/* IRQSTATUS */
-#define IRQSTATUS_MCUACCUMINT		BIT(3)
-#define IRQSTATUS_MCVALIDINT		BIT(2)
-#define IRQSTATUS_MCBOUNDSINT		BIT(1)
-#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
-
-/* IRQENABLE_SET and IRQENABLE_CLEAR */
-#define IRQENABLE_MCUACCUMINT		BIT(3)
-#define IRQENABLE_MCUVALIDINT		BIT(2)
-#define IRQENABLE_MCUBOUNDSINT		BIT(1)
-#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
-
-/* Common Bit values */
-
-#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
-#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
-#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
-#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
-#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
-
-/*
- * 3430 specific values. Maybe these should be passed from board file or
- * pmic structures.
- */
-#define OMAP3430_SR_ACCUMDATA		0x1f4
-
-#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
-#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
-
-#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
-#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
-
-#define OMAP3430_SR_ERRWEIGHT		0x04
-#define OMAP3430_SR_ERRMAXLIMIT		0x02
-
-/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
- *				pmic specific info to smartreflex driver
- *
- * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
- */
-struct omap_sr_pmic_data {
-	void (*sr_pmic_init) (void);
-};
-
-/**
- * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
- *
- * @sensor_voltdm_name:       Name of voltdomain of SR instance
- */
-struct omap_smartreflex_dev_attr {
-	const char      *sensor_voltdm_name;
-};
-
-#ifdef CONFIG_OMAP_SMARTREFLEX
-/*
- * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
- * The smartreflex class driver should pass the class type.
- * Should be used to populate the class_type field of the
- * omap_smartreflex_class_data structure.
- */
-#define SR_CLASS1	0x1
-#define SR_CLASS2	0x2
-#define SR_CLASS3	0x3
-
-/**
- * struct omap_sr_class_data - Smartreflex class driver info
- *
- * @enable:		API to enable a particular class smaartreflex.
- * @disable:		API to disable a particular class smartreflex.
- * @configure:		API to configure a particular class smartreflex.
- * @notify:		API to notify the class driver about an event in SR.
- *			Not needed for class3.
- * @notify_flags:	specify the events to be notified to the class driver
- * @class_type:		specify which smartreflex class.
- *			Can be used by the SR driver to take any class
- *			based decisions.
- */
-struct omap_sr_class_data {
-	int (*enable)(struct voltagedomain *voltdm);
-	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
-	int (*configure)(struct voltagedomain *voltdm);
-	int (*notify)(struct voltagedomain *voltdm, u32 status);
-	u8 notify_flags;
-	u8 class_type;
-};
-
-/**
- * struct omap_sr_nvalue_table	- Smartreflex n-target value info
- *
- * @efuse_offs:	The offset of the efuse where n-target values are stored.
- * @nvalue:	The n-target value.
- */
-struct omap_sr_nvalue_table {
-	u32 efuse_offs;
-	u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type:		Smartreflex IP type.
- * @senp_mod:		SENPENABLE value for the sr
- * @senn_mod:		SENNENABLE value for sr
- * @nvalue_count:	Number of distinct nvalues in the nvalue table
- * @enable_on_init:	whether this sr module needs to enabled at
- *			boot up or not.
- * @nvalue_table:	table containing the  efuse offsets and nvalues
- *			corresponding to them.
- * @voltdm:		Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
-	int				ip_type;
-	u32				senp_mod;
-	u32				senn_mod;
-	int				nvalue_count;
-	bool				enable_on_init;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-};
-
-/* Smartreflex module enable/disable interface */
-void omap_sr_enable(struct voltagedomain *voltdm);
-void omap_sr_disable(struct voltagedomain *voltdm);
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
-
-/* API to register the pmic specific data with the smartreflex driver. */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
-
-/* Smartreflex driver hooks to be called from Smartreflex class driver */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
-void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_disable_errgen(struct voltagedomain *voltdm);
-int sr_configure_minmax(struct voltagedomain *voltdm);
-
-/* API to register the smartreflex class driver with the smartreflex driver */
-int sr_register_class(struct omap_sr_class_data *class_data);
-#else
-static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable_reset_volt(
-		struct voltagedomain *voltdm) {}
-static inline void omap_sr_register_pmic(
-		struct omap_sr_pmic_data *pmic_data) {}
-#endif
-#endif
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e8358..e107e3915a8 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -17,6 +17,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/power/smartreflex.h>
 
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -24,7 +25,6 @@
 
 #include <plat/omap_device.h>
 
-#include "smartreflex.h"
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"
@@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
 {
 	struct omap_sr_nvalue_table *nvalue_table;
-	int i, count = 0;
+	int i, j, count = 0;
+
+	sr_data->nvalue_count = 0;
+	sr_data->nvalue_table = NULL;
 
 	while (volt_data[count].volt_nominal)
 		count++;
@@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
 			GFP_KERNEL);
 
-	for (i = 0; i < count; i++) {
+	if (!nvalue_table) {
+		pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+		return;
+	}
+
+	for (i = 0, j = 0; i < count; i++) {
 		u32 v;
+
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
 		 * A __raw_readl will fail for non-32 bit aligned address
@@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				omap_ctrl_readb(offset + 1) << 8 |
 				omap_ctrl_readb(offset + 2) << 16;
 		} else {
-			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+			v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
 		}
 
-		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
-		nvalue_table[i].nvalue = v;
+		/*
+		 * Many OMAP SoCs don't have the eFuse values set.
+		 * For example, pretty much all OMAP3xxx before
+		 * ES3.something.
+		 *
+		 * XXX There needs to be some way for board files or
+		 * userspace to add these in.
+		 */
+		if (v == 0)
+			continue;
+
+		nvalue_table[j].nvalue = v;
+		nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
+		nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+		nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+		j++;
 	}
 
 	sr_data->nvalue_table = nvalue_table;
-	sr_data->nvalue_count = count;
+	sr_data->nvalue_count = j;
 }
 
 static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
@@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		goto exit;
 	}
 
+	sr_data->name = oh->name;
 	sr_data->ip_type = oh->class->rev;
 	sr_data->senn_mod = 0x1;
 	sr_data->senp_mod = 0x1;
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index a7c43c1042b..0ac2caf1594 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -16,6 +16,8 @@
 
 #include <linux/err.h>
 
+#include <plat/voltage.h>
+
 #include "vc.h"
 #include "vp.h"
 
@@ -91,25 +93,6 @@ struct voltagedomain {
 };
 
 /**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-
-/**
  * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
  * @slew_rate:	PMIC slew rate (in uv/us)
  * @step_size:	PMIC voltage step size (in uv)