[ARM] Orion: move EHCI/I2C/UART peripheral init into board code

This patch moves initialisation of EHCI/I2C/UART platform devices
from the common orion5x_init() into the board support code.

The rationale behind this is that only the board support code knows
whether certain peripherals have been brought out on the board, and
not initialising peripherals that haven't been brought out is
desirable for example:
- to reduce user confusion (e.g. seeing both 'eth0' and 'eth1'
  appear while there is only one ethernet port on the board); and
- to allow for future power savings (peripherals that have not
  been brought out can be clock gated off entirely).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Russell King <linux@arm.linux.org.uk>

1 files changed, 136 insertions, 90 deletions

diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index fa4be3cb154..b2986717319 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -63,65 +63,20 @@ void __init orion5x_map_io(void)
 	iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
 }
 
+
 /*****************************************************************************
- * UART
+ * EHCI
  ****************************************************************************/
-
-static struct resource orion5x_uart_resources[] = {
-	{
-		.start		= UART0_PHYS_BASE,
-		.end		= UART0_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_ORION5X_UART0,
-		.end		= IRQ_ORION5X_UART0,
-		.flags		= IORESOURCE_IRQ,
-	}, {
-		.start		= UART1_PHYS_BASE,
-		.end		= UART1_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_ORION5X_UART1,
-		.end		= IRQ_ORION5X_UART1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct plat_serial8250_port orion5x_uart_data[] = {
-	{
-		.mapbase	= UART0_PHYS_BASE,
-		.membase	= (char *)UART0_VIRT_BASE,
-		.irq		= IRQ_ORION5X_UART0,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION5X_TCLK,
-	}, {
-		.mapbase	= UART1_PHYS_BASE,
-		.membase	= (char *)UART1_VIRT_BASE,
-		.irq		= IRQ_ORION5X_UART1,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION5X_TCLK,
-	}, {
-	},
+static struct orion_ehci_data orion5x_ehci_data = {
+	.dram		= &orion5x_mbus_dram_info,
 };
 
-static struct platform_device orion5x_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= orion5x_uart_data,
-	},
-	.resource		= orion5x_uart_resources,
-	.num_resources		= ARRAY_SIZE(orion5x_uart_resources),
-};
+static u64 ehci_dmamask = 0xffffffffUL;
 
-/*******************************************************************************
- * USB Controller - 2 interfaces
- ******************************************************************************/
 
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
 static struct resource orion5x_ehci0_resources[] = {
 	{
 		.start	= ORION5X_USB0_PHYS_BASE,
@@ -134,24 +89,6 @@ static struct resource orion5x_ehci0_resources[] = {
 	},
 };
 
-static struct resource orion5x_ehci1_resources[] = {
-	{
-		.start	= ORION5X_USB1_PHYS_BASE,
-		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_ORION5X_USB1_CTRL,
-		.end	= IRQ_ORION5X_USB1_CTRL,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct orion_ehci_data orion5x_ehci_data = {
-	.dram		= &orion5x_mbus_dram_info,
-};
-
-static u64 ehci_dmamask = 0xffffffffUL;
-
 static struct platform_device orion5x_ehci0 = {
 	.name		= "orion-ehci",
 	.id		= 0,
@@ -164,6 +101,27 @@ static struct platform_device orion5x_ehci0 = {
 	.num_resources	= ARRAY_SIZE(orion5x_ehci0_resources),
 };
 
+void __init orion5x_ehci0_init(void)
+{
+	platform_device_register(&orion5x_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource orion5x_ehci1_resources[] = {
+	{
+		.start	= ORION5X_USB1_PHYS_BASE,
+		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_ORION5X_USB1_CTRL,
+		.end	= IRQ_ORION5X_USB1_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device orion5x_ehci1 = {
 	.name		= "orion-ehci",
 	.id		= 1,
@@ -176,11 +134,15 @@ static struct platform_device orion5x_ehci1 = {
 	.num_resources	= ARRAY_SIZE(orion5x_ehci1_resources),
 };
 
+void __init orion5x_ehci1_init(void)
+{
+	platform_device_register(&orion5x_ehci1);
+}
+
+
 /*****************************************************************************
- * Gigabit Ethernet port
- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ * GigE
  ****************************************************************************/
-
 struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
 	.dram		= &orion5x_mbus_dram_info,
 	.t_clk		= ORION5X_TCLK,
@@ -229,11 +191,10 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 	platform_device_register(&orion5x_eth);
 }
 
+
 /*****************************************************************************
- * I2C controller
- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ * I2C
  ****************************************************************************/
-
 static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 	.freq_m		= 8, /* assumes 166 MHz TCLK */
 	.freq_n		= 3,
@@ -244,7 +205,7 @@ static struct resource orion5x_i2c_resources[] = {
 	{
 		.name	= "i2c base",
 		.start	= I2C_PHYS_BASE,
-		.end	= I2C_PHYS_BASE + 0x20 -1,
+		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.name	= "i2c irq",
@@ -264,8 +225,14 @@ static struct platform_device orion5x_i2c = {
 	},
 };
 
+void __init orion5x_i2c_init(void)
+{
+	platform_device_register(&orion5x_i2c);
+}
+
+
 /*****************************************************************************
- * Sata port
+ * SATA
  ****************************************************************************/
 static struct resource orion5x_sata_resources[] = {
 	{
@@ -298,10 +265,98 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
 	platform_device_register(&orion5x_sata);
 }
 
+
 /*****************************************************************************
- * Time handling
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart0_data[] = {
+	{
+		.mapbase	= UART0_PHYS_BASE,
+		.membase	= (char *)UART0_VIRT_BASE,
+		.irq		= IRQ_ORION5X_UART0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= ORION5X_TCLK,
+	}, {
+	},
+};
+
+static struct resource orion5x_uart0_resources[] = {
+	{
+		.start		= UART0_PHYS_BASE,
+		.end		= UART0_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_ORION5X_UART0,
+		.end		= IRQ_ORION5X_UART0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_uart0 = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= orion5x_uart0_data,
+	},
+	.resource		= orion5x_uart0_resources,
+	.num_resources		= ARRAY_SIZE(orion5x_uart0_resources),
+};
+
+void __init orion5x_uart0_init(void)
+{
+	platform_device_register(&orion5x_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
  ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart1_data[] = {
+	{
+		.mapbase	= UART1_PHYS_BASE,
+		.membase	= (char *)UART1_VIRT_BASE,
+		.irq		= IRQ_ORION5X_UART1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= ORION5X_TCLK,
+	}, {
+	},
+};
+
+static struct resource orion5x_uart1_resources[] = {
+	{
+		.start		= UART1_PHYS_BASE,
+		.end		= UART1_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_ORION5X_UART1,
+		.end		= IRQ_ORION5X_UART1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_uart1 = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= orion5x_uart1_data,
+	},
+	.resource		= orion5x_uart1_resources,
+	.num_resources		= ARRAY_SIZE(orion5x_uart1_resources),
+};
+
+void __init orion5x_uart1_init(void)
+{
+	platform_device_register(&orion5x_uart1);
+}
 
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
 static void orion5x_timer_init(void)
 {
 	orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
@@ -311,10 +366,10 @@ struct sys_timer orion5x_timer = {
 	.init = orion5x_timer_init,
 };
 
+
 /*****************************************************************************
  * General
  ****************************************************************************/
-
 /*
  * Identify device ID and rev from PCIe configuration header space '0'.
  */
@@ -359,15 +414,6 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
-
-	/*
-	 * Register devices.
-	 */
-	platform_device_register(&orion5x_uart);
-	platform_device_register(&orion5x_ehci0);
-	if (dev == MV88F5182_DEV_ID)
-		platform_device_register(&orion5x_ehci1);
-	platform_device_register(&orion5x_i2c);
 }
 
 /*