Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

9 files changed, 24 insertions, 24 deletions

diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 1a5d6a0e260..5ceafdccc45 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -19,7 +19,7 @@
 #include "common.h"
 
 /*
- * The Orion has fully programable address map. There's a separate address
+ * The Orion has fully programmable address map. There's a separate address
  * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
  * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
  * address decode windows that allow it to access any of the Orion resources.
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index c10a1171537..b7d4591214e 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ed85891f869..43cf8bc9767 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -34,8 +34,8 @@ void __init orion5x_init_irq(void)
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
 	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
+	irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
+	irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
+	irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
+	irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
 }
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 429ecafe9fd..a5930f83958 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -190,7 +190,7 @@ err_free_1:
  * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
  * single GPIO line and are compatible with the leds-gpio driver.
  *
- * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
  * in the following array:
  *
  * SATAx blue LED | SATAx activity | LED state
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 67ec6959b26..4fc46772a08 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
 	if (gpio_request(pin, "PCI IntA") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
 	if (gpio_request(pin, "PCI IntB") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 5653ee6c71d..61600414391 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -88,7 +88,7 @@ void __init tsp2_pci_preinit(void)
 	pin = TSP2_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "tsp2_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 8bbd27ea673..e6d64494d3d 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -36,7 +36,7 @@
 
 /****************************************************************************
  * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     existing QNAP firmware.
  *
  * Layout as used by QNAP:
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 92f393f08fa..9eac8192d92 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -56,7 +56,7 @@
 
 /****************************************************************************
  * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     existing QNAP firmware.
  *
  * Layout as used by QNAP:
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707d20a..edb1dd2d161 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+			pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
 					ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RTC not registered\n");
+			pr_info("TS-78xx: RTC not registered\n");
 			ts78xx_fpga.supports.ts_rtc.present = 0;
 		}
 		ret |= tmp;
@@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_nand.present == 1) {
 		tmp = ts78xx_ts_nand_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: NAND not registered\n");
+			pr_info("TS-78xx: NAND not registered\n");
 			ts78xx_fpga.supports.ts_nand.present = 0;
 		}
 		ret |= tmp;
@@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rng.present == 1) {
 		tmp = ts78xx_ts_rng_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			pr_info("TS-78xx: RNG not registered\n");
 			ts78xx_fpga.supports.ts_rng.present = 0;
 		}
 		ret |= tmp;
@@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
 {
 	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
 
-	printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+	pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff,
 			ts78xx_fpga.id & 0xff);
 
@@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
 	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
 	 */
 	if (ts78xx_fpga.id != fpga_id) {
-		printk(KERN_ERR	"TS-78xx FPGA: magic/rev mismatch\n"
+		pr_err("TS-78xx FPGA: magic/rev mismatch\n"
 			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
 			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	int value, ret;
 
 	if (ts78xx_fpga.state < 0) {
-		printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+		pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
 		return -EBUSY;
 	}
 
@@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		value = 0;
 	else {
-		printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+		pr_err("ts78xx_fpga_store: Invalid value\n");
 		return -EINVAL;
 	}
 
@@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
 	ret = ts78xx_fpga_load();
 	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
 	if (ret)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+		pr_err("sysfs_create_file failed: %d\n", ret);
 }
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")