Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

15 files changed, 0 insertions, 3762 deletions

diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig
deleted file mode 100644
index 1dcbb6ac5a3..00000000000
--- a/arch/arm/mach-orion/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-if ARCH_ORION
-
-menu "Orion Implementations"
-
-config MACH_DB88F5281
-	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-2 (88F5281) Development Board
-
-config MACH_RD88F5182
-	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-NAS (88F5182) RD2
-
-config MACH_KUROBOX_PRO
-	bool "KuroBox Pro"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  KuroBox Pro platform.
-
-config MACH_DNS323
-	bool "D-Link DNS-323"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  D-Link DNS-323 platform.
-
-config MACH_TS209
-	bool "QNAP TS-109/TS-209"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-109/TS-209 platform.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile
deleted file mode 100644
index f91d937a73e..00000000000
--- a/arch/arm/mach-orion/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-y				+= common.o addr-map.o pci.o gpio.o irq.o time.o
-obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
-obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
-obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
-obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
-obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o
diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion/Makefile.boot
deleted file mode 100644
index 67039c3e0c4..00000000000
--- a/arch/arm/mach-orion/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c
deleted file mode 100644
index 2e2fd63643c..00000000000
--- a/arch/arm/mach-orion/addr-map.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * arch/arm/mach-orion/addr-map.c
- *
- * Address map functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/hardware.h>
-#include "common.h"
-
-/*
- * The Orion has fully programable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
- * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
- * address decode windows that allow it to access any of the Orion resources.
- *
- * CPU address decoding --
- * Linux assumes that it is the boot loader that already setup the access to
- * DDR and internal registers.
- * Setup access to PCI and PCI-E IO/MEM space is issued by core.c.
- * Setup access to various devices located on the device bus interface (e.g.
- * flashes, RTC, etc) should be issued by machine-setup.c according to
- * specific board population (by using orion_setup_cpu_win()).
- *
- * Non-CPU Masters address decoding --
- * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
- * banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
- */
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR		0
-#define TARGET_PCI		3
-#define TARGET_PCIE		4
-#define TARGET_DEV_BUS		1
-#define ATTR_DDR_CS(n)		(((n) ==0) ? 0xe :	\
-				((n) == 1) ? 0xd :	\
-				((n) == 2) ? 0xb :	\
-				((n) == 3) ? 0x7 : 0xf)
-#define ATTR_PCIE_MEM		0x59
-#define ATTR_PCIE_IO		0x51
-#define ATTR_PCI_MEM		0x59
-#define ATTR_PCI_IO		0x51
-#define ATTR_DEV_CS0		0x1e
-#define ATTR_DEV_CS1		0x1d
-#define ATTR_DEV_CS2		0x1b
-#define ATTR_DEV_BOOT		0xf
-#define WIN_EN			1
-
-/*
- * Helpers to get DDR banks info
- */
-#define DDR_BASE_CS(n)		ORION_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n)		ORION_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS		4
-#define DDR_REG_TO_SIZE(reg)	(((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg)	((reg) & 0xff000000)
-#define DDR_BANK_EN		1
-
-/*
- * CPU Address Decode Windows registers
- */
-#define CPU_WIN_CTRL(n)		ORION_BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n)		ORION_BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n)	ORION_BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n)	ORION_BRIDGE_REG(0x00c | ((n) << 4))
-#define CPU_MAX_WIN		8
-
-/*
- * Use this CPU address decode windows allocation
- */
-#define CPU_WIN_PCIE_IO		0
-#define CPU_WIN_PCI_IO		1
-#define CPU_WIN_PCIE_MEM	2
-#define CPU_WIN_PCI_MEM		3
-#define CPU_WIN_DEV_BOOT	4
-#define CPU_WIN_DEV_CS0		5
-#define CPU_WIN_DEV_CS1		6
-#define CPU_WIN_DEV_CS2		7
-
-/*
- * PCIE Address Decode Windows registers
- */
-#define PCIE_BAR_CTRL(n)	ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
-#define PCIE_BAR_LO(n)		ORION_PCIE_REG(0x0010 + ((n) * 8))
-#define PCIE_BAR_HI(n)		ORION_PCIE_REG(0x0014 + ((n) * 8))
-#define PCIE_WIN_CTRL(n)	ORION_PCIE_REG(0x1820 + ((n) << 4))
-#define PCIE_WIN_BASE(n)	ORION_PCIE_REG(0x1824 + ((n) << 4))
-#define PCIE_WIN_REMAP(n)	ORION_PCIE_REG(0x182c + ((n) << 4))
-#define PCIE_DEFWIN_CTRL	ORION_PCIE_REG(0x18b0)
-#define PCIE_EXPROM_WIN_CTRL	ORION_PCIE_REG(0x18c0)
-#define PCIE_EXPROM_WIN_REMP	ORION_PCIE_REG(0x18c4)
-#define PCIE_MAX_BARS		3
-#define PCIE_MAX_WINS		5
-
-/*
- * Use PCIE BAR '1' for all DDR banks
- */
-#define PCIE_DRAM_BAR		1
-
-/*
- * PCI Address Decode Windows registers
- */
-#define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION_PCI_REG(0xc08) : \
-				((n) == 1) ? ORION_PCI_REG(0xd08) :  \
-				((n) == 2) ? ORION_PCI_REG(0xc0c) :  \
-				((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n)	(((n) ==0) ? ORION_PCI_REG(0xc48) : \
-				((n) == 1) ? ORION_PCI_REG(0xd48) :  \
-				((n) == 2) ? ORION_PCI_REG(0xc4c) :  \
-				((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
-#define PCI_BAR_ENABLE		ORION_PCI_REG(0xc3c)
-#define PCI_CTRL_BASE_LO(n)	ORION_PCI_REG(0x1e00 | ((n) << 4))
-#define PCI_CTRL_BASE_HI(n)	ORION_PCI_REG(0x1e04 | ((n) << 4))
-#define PCI_CTRL_SIZE(n)	ORION_PCI_REG(0x1e08 | ((n) << 4))
-#define PCI_ADDR_DECODE_CTRL	ORION_PCI_REG(0xd3c)
-
-/*
- * PCI configuration heleprs for BAR settings
- */
-#define PCI_CONF_FUNC_BAR_CS(n)		((n) >> 1)
-#define PCI_CONF_REG_BAR_LO_CS(n)	(((n) & 1) ? 0x18 : 0x10)
-#define PCI_CONF_REG_BAR_HI_CS(n)	(((n) & 1) ? 0x1c : 0x14)
-
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win)	ORION_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win)	ORION_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win)	ORION_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN		ORION_ETH_REG(0x290)
-#define ETH_WIN_PROT		ORION_ETH_REG(0x294)
-#define ETH_MAX_WIN		6
-#define ETH_MAX_REMAP_WIN	4
-
-/*
- * USB Address Decode Windows registers
- */
-#define USB_WIN_CTRL(i, w)	((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
-					: ORION_USB1_REG(0x320 + ((w) << 4)))
-#define USB_WIN_BASE(i, w)	((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
-					: ORION_USB1_REG(0x324 + ((w) << 4)))
-#define USB_MAX_WIN		4
-
-/*
- * SATA Address Decode Windows registers
- */
-#define SATA_WIN_CTRL(win)	ORION_SATA_REG(0x30 + ((win) * 0x10))
-#define SATA_WIN_BASE(win)	ORION_SATA_REG(0x34 + ((win) * 0x10))
-#define SATA_MAX_WIN		4
-
-static int __init orion_cpu_win_can_remap(u32 win)
-{
-	u32 dev, rev;
-
-	orion_pcie_id(&dev, &rev);
-	if ((dev == MV88F5281_DEV_ID && win < 4)
-	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2))
-		return 1;
-
-	return 0;
-}
-
-void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap)
-{
-	u32 win, attr, ctrl;
-
-	switch (target) {
-	case ORION_PCIE_IO:
-		target = TARGET_PCIE;
-		attr = ATTR_PCIE_IO;
-		win = CPU_WIN_PCIE_IO;
-		break;
-	case ORION_PCI_IO:
-		target = TARGET_PCI;
-		attr = ATTR_PCI_IO;
-		win = CPU_WIN_PCI_IO;
-		break;
-	case ORION_PCIE_MEM:
-		target = TARGET_PCIE;
-		attr = ATTR_PCIE_MEM;
-		win = CPU_WIN_PCIE_MEM;
-		break;
-	case ORION_PCI_MEM:
-		target = TARGET_PCI;
-		attr = ATTR_PCI_MEM;
-		win = CPU_WIN_PCI_MEM;
-		break;
-	case ORION_DEV_BOOT:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_BOOT;
-		win = CPU_WIN_DEV_BOOT;
-		break;
-	case ORION_DEV0:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_CS0;
-		win = CPU_WIN_DEV_CS0;
-		break;
-	case ORION_DEV1:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_CS1;
-		win = CPU_WIN_DEV_CS1;
-		break;
-	case ORION_DEV2:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_CS2;
-		win = CPU_WIN_DEV_CS2;
-		break;
-	case ORION_DDR:
-	case ORION_REGS:
-		/*
-		 * Must be mapped by bootloader.
-		 */
-	default:
-		target = attr = win = -1;
-		BUG();
-	}
-
-	base &= 0xffff0000;
-	ctrl = (((size - 1) & 0xffff0000) | (attr << 8) |
-		(target << 4) | WIN_EN);
-
-	orion_write(CPU_WIN_BASE(win), base);
-	orion_write(CPU_WIN_CTRL(win), ctrl);
-
-	if (orion_cpu_win_can_remap(win)) {
-		if (remap >= 0) {
-			orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
-			orion_write(CPU_WIN_REMAP_HI(win), 0);
-		} else {
-			orion_write(CPU_WIN_REMAP_LO(win), base);
-			orion_write(CPU_WIN_REMAP_HI(win), 0);
-		}
-	}
-}
-
-void __init orion_setup_cpu_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < CPU_MAX_WIN; i++) {
-		orion_write(CPU_WIN_BASE(i), 0);
-		orion_write(CPU_WIN_CTRL(i), 0);
-		if (orion_cpu_win_can_remap(i)) {
-			orion_write(CPU_WIN_REMAP_LO(i), 0);
-			orion_write(CPU_WIN_REMAP_HI(i), 0);
-		}
-	}
-
-	/*
-	 * Setup windows for PCI+PCIe IO+MEM space.
-	 */
-	orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE,
-				ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE);
-	orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE,
-				ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE);
-	orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE,
-				ORION_PCIE_MEM_SIZE, -1);
-	orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE,
-				ORION_PCI_MEM_SIZE, -1);
-}
-
-/*
- * Setup PCIE BARs and Address Decode Wins:
- * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
- * WIN[0-3] -> DRAM bank[0-3]
- */
-void __init orion_setup_pcie_wins(void)
-{
-	u32 base, size, i;
-
-	/*
-	 * First, disable and clear BARs and windows
-	 */
-	for (i = 1; i < PCIE_MAX_BARS; i++) {
-		orion_write(PCIE_BAR_CTRL(i), 0);
-		orion_write(PCIE_BAR_LO(i), 0);
-		orion_write(PCIE_BAR_HI(i), 0);
-	}
-
-	for (i = 0; i < PCIE_MAX_WINS; i++) {
-		orion_write(PCIE_WIN_CTRL(i), 0);
-		orion_write(PCIE_WIN_BASE(i), 0);
-		orion_write(PCIE_WIN_REMAP(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks. Count total DDR size on the fly.
-	 */
-	base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
-	size = 0;
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 bank_base, bank_size;
-		bank_size = orion_read(DDR_SIZE_CS(i));
-		bank_base = orion_read(DDR_BASE_CS(i));
-		if (bank_size & DDR_BANK_EN) {
-			bank_size = DDR_REG_TO_SIZE(bank_size);
-			bank_base = DDR_REG_TO_BASE(bank_base);
-			orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
-			orion_write(PCIE_WIN_REMAP(i), 0);
-			orion_write(PCIE_WIN_CTRL(i),
-					((bank_size-1) & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					(TARGET_DDR << 4) |
-					(PCIE_DRAM_BAR << 1) | WIN_EN);
-			size += bank_size;
-		}
-	}
-
-	/*
-	 * Setup BAR[1] to all DRAM banks
-	 */
-	orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
-	orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
-	orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
-				((size - 1) & 0xffff0000) | WIN_EN);
-}
-
-void __init orion_setup_pci_wins(void)
-{
-	u32 base, size, i;
-
-	/*
-	 * First, disable windows
-	 */
-	orion_write(PCI_BAR_ENABLE, 0xffffffff);
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		base = orion_read(DDR_BASE_CS(i));
-		size = orion_read(DDR_SIZE_CS(i));
-		if (size & DDR_BANK_EN) {
-			u32 bus, dev, func, reg, val;
-			size = DDR_REG_TO_SIZE(size);
-			base = DDR_REG_TO_BASE(base);
-			bus = orion_pci_local_bus_nr();
-			dev = orion_pci_local_dev_nr();
-			func = PCI_CONF_FUNC_BAR_CS(i);
-			reg = PCI_CONF_REG_BAR_LO_CS(i);
-			orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
-			orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
-					(base & 0xfffff000) | (val & 0xfff));
-			reg = PCI_CONF_REG_BAR_HI_CS(i);
-			orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
-			orion_write(PCI_BAR_SIZE_DDR_CS(i),
-					(size - 1) & 0xfffff000);
-			orion_write(PCI_BAR_REMAP_DDR_CS(i),
-					base & 0xfffff000);
-			orion_clrbits(PCI_BAR_ENABLE, (1 << i));
-		}
-	}
-
-	/*
-	 * Disable automatic update of address remaping when writing to BARs
-	 */
-	orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
-}
-
-void __init orion_setup_usb_wins(void)
-{
-	int i;
-	u32 usb_if, dev, rev;
-	u32 max_usb_if = 1;
-
-	orion_pcie_id(&dev, &rev);
-	if (dev == MV88F5182_DEV_ID)
-		max_usb_if = 2;
-
-	for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
-		/*
-		 * First, disable and clear windows
-		 */
-		for (i = 0; i < USB_MAX_WIN; i++) {
-			orion_write(USB_WIN_BASE(usb_if, i), 0);
-			orion_write(USB_WIN_CTRL(usb_if, i), 0);
-		}
-
-		/*
-		 * Setup windows for DDR banks.
-		 */
-		for (i = 0; i < DDR_MAX_CS; i++) {
-			u32 base, size;
-			size = orion_read(DDR_SIZE_CS(i));
-			base = orion_read(DDR_BASE_CS(i));
-			if (size & DDR_BANK_EN) {
-				base = DDR_REG_TO_BASE(base);
-				size = DDR_REG_TO_SIZE(size);
-				orion_write(USB_WIN_CTRL(usb_if, i),
-						((size-1) & 0xffff0000) |
-						(ATTR_DDR_CS(i) << 8) |
-						(TARGET_DDR << 4) | WIN_EN);
-				orion_write(USB_WIN_BASE(usb_if, i),
-						base & 0xffff0000);
-			}
-		}
-	}
-}
-
-void __init orion_setup_eth_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < ETH_MAX_WIN; i++) {
-		orion_write(ETH_WIN_BASE(i), 0);
-		orion_write(ETH_WIN_SIZE(i), 0);
-		orion_setbits(ETH_WIN_EN, 1 << i);
-		orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		if (i < ETH_MAX_REMAP_WIN)
-			orion_write(ETH_WIN_REMAP(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 base, size;
-		size = orion_read(DDR_SIZE_CS(i));
-		base = orion_read(DDR_BASE_CS(i));
-		if (size & DDR_BANK_EN) {
-			base = DDR_REG_TO_BASE(base);
-			size = DDR_REG_TO_SIZE(size);
-			orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
-			orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					TARGET_DDR);
-			orion_clrbits(ETH_WIN_EN, 1 << i);
-			orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		}
-	}
-}
-
-void __init orion_setup_sata_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < SATA_MAX_WIN; i++) {
-		orion_write(SATA_WIN_BASE(i), 0);
-		orion_write(SATA_WIN_CTRL(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 base, size;
-		size = orion_read(DDR_SIZE_CS(i));
-		base = orion_read(DDR_BASE_CS(i));
-		if (size & DDR_BANK_EN) {
-			base = DDR_REG_TO_BASE(base);
-			size = DDR_REG_TO_SIZE(size);
-			orion_write(SATA_WIN_CTRL(i),
-					((size-1) & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					(TARGET_DDR << 4) | WIN_EN);
-			orion_write(SATA_WIN_BASE(i),
-					base & 0xffff0000);
-		}
-	}
-}
diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c
deleted file mode 100644
index 5f0ee4b8a9b..00000000000
--- a/arch/arm/mach-orion/common.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * arch/arm/mach-orion/common.c
- *
- * Core functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/mv643xx_i2c.h>
-#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
-#include "common.h"
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc orion_io_desc[] __initdata = {
-	{
-		.virtual	= ORION_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_REGS_PHYS_BASE),
-		.length		= ORION_REGS_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= ORION_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE),
-		.length		= ORION_PCIE_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= ORION_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_PCI_IO_PHYS_BASE),
-		.length		= ORION_PCI_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= ORION_PCIE_WA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE),
-		.length		= ORION_PCIE_WA_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init orion_map_io(void)
-{
-	iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc));
-}
-
-/*****************************************************************************
- * UART
- ****************************************************************************/
-
-static struct resource orion_uart_resources[] = {
-	{
-		.start		= UART0_PHYS_BASE,
-		.end		= UART0_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_ORION_UART0,
-		.end		= IRQ_ORION_UART0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= UART1_PHYS_BASE,
-		.end		= UART1_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_ORION_UART1,
-		.end		= IRQ_ORION_UART1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct plat_serial8250_port orion_uart_data[] = {
-	{
-		.mapbase	= UART0_PHYS_BASE,
-		.membase	= (char *)UART0_VIRT_BASE,
-		.irq		= IRQ_ORION_UART0,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION_TCLK,
-	},
-	{
-		.mapbase	= UART1_PHYS_BASE,
-		.membase	= (char *)UART1_VIRT_BASE,
-		.irq		= IRQ_ORION_UART1,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION_TCLK,
-	},
-	{ },
-};
-
-static struct platform_device orion_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= orion_uart_data,
-	},
-	.resource		= orion_uart_resources,
-	.num_resources		= ARRAY_SIZE(orion_uart_resources),
-};
-
-/*******************************************************************************
- * USB Controller - 2 interfaces
- ******************************************************************************/
-
-static struct resource orion_ehci0_resources[] = {
-	{
-		.start	= ORION_USB0_PHYS_BASE,
-		.end	= ORION_USB0_PHYS_BASE + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_ORION_USB0_CTRL,
-		.end	= IRQ_ORION_USB0_CTRL,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource orion_ehci1_resources[] = {
-	{
-		.start	= ORION_USB1_PHYS_BASE,
-		.end	= ORION_USB1_PHYS_BASE + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_ORION_USB1_CTRL,
-		.end	= IRQ_ORION_USB1_CTRL,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ehci_dmamask = 0xffffffffUL;
-
-static struct platform_device orion_ehci0 = {
-	.name		= "orion-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= orion_ehci0_resources,
-	.num_resources	= ARRAY_SIZE(orion_ehci0_resources),
-};
-
-static struct platform_device orion_ehci1 = {
-	.name		= "orion-ehci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= orion_ehci1_resources,
-	.num_resources	= ARRAY_SIZE(orion_ehci1_resources),
-};
-
-/*****************************************************************************
- * Gigabit Ethernet port
- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
- ****************************************************************************/
-
-static struct resource orion_eth_shared_resources[] = {
-	{
-		.start	= ORION_ETH_PHYS_BASE,
-		.end	= ORION_ETH_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_eth_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= orion_eth_shared_resources,
-};
-
-static struct resource orion_eth_resources[] = {
-	{
-		.name	= "eth irq",
-		.start	= IRQ_ORION_ETH_SUM,
-		.end	= IRQ_ORION_ETH_SUM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device orion_eth = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= orion_eth_resources,
-};
-
-void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	orion_eth.dev.platform_data = eth_data;
-	platform_device_register(&orion_eth_shared);
-	platform_device_register(&orion_eth);
-}
-
-/*****************************************************************************
- * I2C controller
- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
- ****************************************************************************/
-
-static struct mv64xxx_i2c_pdata orion_i2c_pdata = {
-	.freq_m		= 8, /* assumes 166 MHz TCLK */
-	.freq_n		= 3,
-	.timeout	= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource orion_i2c_resources[] = {
-	{
-		.name   = "i2c base",
-		.start  = I2C_PHYS_BASE,
-		.end    = I2C_PHYS_BASE + 0x20 -1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "i2c irq",
-		.start  = IRQ_ORION_I2C,
-		.end    = IRQ_ORION_I2C,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_i2c = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_i2c_resources),
-	.resource	= orion_i2c_resources,
-	.dev		= {
-		.platform_data = &orion_i2c_pdata,
-	},
-};
-
-/*****************************************************************************
- * Sata port
- ****************************************************************************/
-static struct resource orion_sata_resources[] = {
-        {
-                .name   = "sata base",
-                .start  = ORION_SATA_PHYS_BASE,
-                .end    = ORION_SATA_PHYS_BASE + 0x5000 - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-	{
-                .name   = "sata irq",
-                .start  = IRQ_ORION_SATA,
-                .end    = IRQ_ORION_SATA,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device orion_sata = {
-	.name           = "sata_mv",
-	.id             = 0,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(orion_sata_resources),
-	.resource       = orion_sata_resources,
-};
-
-void __init orion_sata_init(struct mv_sata_platform_data *sata_data)
-{
-	orion_sata.dev.platform_data = sata_data;
-	platform_device_register(&orion_sata);
-}
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-
-/*
- * Identify device ID and rev from PCIE configuration header space '0'.
- */
-static void orion_id(u32 *dev, u32 *rev, char **dev_name)
-{
-	orion_pcie_id(dev, rev);
-
-	if (*dev == MV88F5281_DEV_ID) {
-		if (*rev == MV88F5281_REV_D2) {
-			*dev_name = "MV88F5281-D2";
-		} else if (*rev == MV88F5281_REV_D1) {
-			*dev_name = "MV88F5281-D1";
-		} else {
-			*dev_name = "MV88F5281-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F5182_DEV_ID) {
-		if (*rev == MV88F5182_REV_A2) {
-			*dev_name = "MV88F5182-A2";
-		} else {
-			*dev_name = "MV88F5182-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F5181_DEV_ID) {
-		if (*rev == MV88F5181_REV_B1) {
-			*dev_name = "MV88F5181-Rev-B1";
-		} else {
-			*dev_name = "MV88F5181-Rev-Unsupported";
-		}
-	} else {
-		*dev_name = "Device-Unknown";
-	}
-}
-
-void __init orion_init(void)
-{
-	char *dev_name;
-	u32 dev, rev;
-
-	orion_id(&dev, &rev, &dev_name);
-	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK);
-
-	/*
-	 * Setup Orion address map
-	 */
-	orion_setup_cpu_wins();
-	orion_setup_usb_wins();
-	orion_setup_eth_wins();
-	orion_setup_pci_wins();
-	orion_setup_pcie_wins();
-	if (dev == MV88F5182_DEV_ID)
-		orion_setup_sata_wins();
-
-	/*
-	 * REgister devices
-	 */
-	platform_device_register(&orion_uart);
-	platform_device_register(&orion_ehci0);
-	if (dev == MV88F5182_DEV_ID)
-		platform_device_register(&orion_ehci1);
-	platform_device_register(&orion_i2c);
-}
diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h
deleted file mode 100644
index 10154ec885d..00000000000
--- a/arch/arm/mach-orion/common.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef __ARCH_ORION_COMMON_H__
-#define __ARCH_ORION_COMMON_H__
-
-/*
- * Basic Orion init functions used early by machine-setup.
- */
-
-void __init orion_map_io(void);
-void __init orion_init_irq(void);
-void __init orion_init(void);
-
-/*
- * Enumerations and functions for Orion windows mapping. Used by Orion core
- * functions to map its interfaces and by the machine-setup to map its on-
- * board devices. Details in /mach-orion/addr-map.c
- */
-
-enum orion_target {
-	ORION_DEV_BOOT = 0,
-	ORION_DEV0,
-	ORION_DEV1,
-	ORION_DEV2,
-	ORION_PCIE_MEM,
-	ORION_PCIE_IO,
-	ORION_PCI_MEM,
-	ORION_PCI_IO,
-	ORION_DDR,
-	ORION_REGS,
-	ORION_MAX_TARGETS
-};
-
-void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap);
-void orion_setup_cpu_wins(void);
-void orion_setup_eth_wins(void);
-void orion_setup_usb_wins(void);
-void orion_setup_pci_wins(void);
-void orion_setup_pcie_wins(void);
-void orion_setup_sata_wins(void);
-
-/*
- * Shared code used internally by other Orion core functions.
- * (/mach-orion/pci.c)
- */
-
-struct pci_sys_data;
-struct pci_bus;
-
-void orion_pcie_id(u32 *dev, u32 *rev);
-u32 orion_pcie_local_bus_nr(void);
-u32 orion_pci_local_bus_nr(void);
-u32 orion_pci_local_dev_nr(void);
-int orion_pci_sys_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
-int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val);
-int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val);
-
-/*
- * Valid GPIO pins according to MPP setup, used by machine-setup.
- * (/mach-orion/gpio.c).
- */
-
-void __init orion_gpio_set_valid_pins(u32 pins);
-void gpio_display(void);	/* debug */
-
-/*
- * Orion system timer (clocksource + clockevnt, /mach-orion/time.c)
- */
-extern struct sys_timer orion_timer;
-
-/*
- * Pull in Orion Ethernet platform_data, used by machine-setup
- */
-
-struct mv643xx_eth_platform_data;
-
-void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data);
-
-/*
- * Orion Sata platform_data, used by machine-setup
- */
-
-struct mv_sata_platform_data;
-
-void __init orion_sata_init(struct mv_sata_platform_data *sata_data);
-
-#endif /* __ARCH_ORION_COMMON_H__ */
diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c
deleted file mode 100644
index 5ef44e1a2d3..00000000000
--- a/arch/arm/mach-orion/db88f5281-setup.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * arch/arm/mach-orion/db88f5281-setup.c
- *
- * Marvell Orion-2 Development Board Setup
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
-#include "common.h"
-
-/*****************************************************************************
- * DB-88F5281 on board devices
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define DB88F5281_NOR_BOOT_BASE		0xf4000000
-#define DB88F5281_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 7-Segment on Device bus chip select 0
- */
-
-#define DB88F5281_7SEG_BASE		0xfa000000
-#define DB88F5281_7SEG_SIZE		SZ_1K
-
-/*
- * 32M NOR flash on Device bus chip select 1
- */
-
-#define DB88F5281_NOR_BASE		0xfc000000
-#define DB88F5281_NOR_SIZE		SZ_32M
-
-/*
- * 32M NAND flash on Device bus chip select 2
- */
-
-#define DB88F5281_NAND_BASE		0xfa800000
-#define DB88F5281_NAND_SIZE		SZ_1K
-
-/*
- * PCI
- */
-
-#define DB88F5281_PCI_SLOT0_OFFS		7
-#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
-#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13
-
-/*****************************************************************************
- * 512M NOR Flash on Device bus Boot CS
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_boot_flash_data = {
-	.width		= 1,	/* 8 bit bus width */
-};
-
-static struct resource db88f5281_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BOOT_BASE,
-	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device db88f5281_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &db88f5281_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_boot_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_nor_flash_data = {
-	.width		= 4,	/* 32 bit bus width */
-};
-
-static struct resource db88f5281_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BASE,
-	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
-};
-
-static struct platform_device db88f5281_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &db88f5281_nor_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_nor_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NAND Flash on Device bus CS2
- ****************************************************************************/
-
-static struct mtd_partition db88f5281_nand_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = SZ_2M,
-	},
-	{
-		.name = "root",
-		.offset = SZ_2M,
-		.size = (SZ_16M - SZ_2M),
-	},
-	{
-		.name = "user",
-		.offset = SZ_16M,
-		.size = SZ_8M,
-	},
-	{
-		.name = "recovery",
-		.offset = (SZ_16M + SZ_8M),
-		.size = SZ_8M,
-	},
-};
-
-static struct resource db88f5281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NAND_BASE,
-	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data db88f5281_nand_data = {
-	.parts		= db88f5281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device db88f5281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f5281_nand_data,
-	},
-	.resource	= &db88f5281_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 7-Segment on Device bus CS0
- * Dummy counter every 2 sec
- ****************************************************************************/
-
-static void __iomem *db88f5281_7seg;
-static struct timer_list db88f5281_timer;
-
-static void db88f5281_7seg_event(unsigned long data)
-{
-	static int count = 0;
-	writel(0, db88f5281_7seg + (count << 4));
-	count = (count + 1) & 7;
-	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-}
-
-static int __init db88f5281_7seg_init(void)
-{
-	if (machine_is_db88f5281()) {
-		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
-					DB88F5281_7SEG_SIZE);
-		if (!db88f5281_7seg) {
-			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
-			return -EIO;
-		}
-		setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
-		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-	}
-
-	return 0;
-}
-
-__initcall(db88f5281_7seg_init);
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-void __init db88f5281_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit faield to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-
-	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit faield "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * PCIE IRQ is connected internally (not GPIO)
-	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
-	case 1:
-	case 2:
-		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci db88f5281_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= db88f5281_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
-	.map_irq	= db88f5281_pci_map_irq,
-};
-
-static int __init db88f5281_pci_init(void)
-{
-	if (machine_is_db88f5281())
-		pci_common_init(&db88f5281_pci);
-
-	return 0;
-}
-
-subsys_initcall(db88f5281_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data db88f5281_eth_data = {
-	.phy_addr	= 8,
-	.force_phy_addr = 1,
-};
-
-/*****************************************************************************
- * RTC DS1339 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
-	.driver_name	= "rtc-ds1307",
-	.type		= "ds1339",
-	.addr		= 0x68,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static struct platform_device *db88f5281_devs[] __initdata = {
-	&db88f5281_boot_flash,
-	&db88f5281_nor_flash,
-	&db88f5281_nand_flash,
-};
-
-static void __init db88f5281_init(void)
-{
-	/*
-	 * Basic Orion setup. Need to be called early.
-	 */
-	orion_init();
-
-	/*
-	 * Setup the CPU address decode windows for our on-board devices
-	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE,
-				DB88F5281_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV0,	DB88F5281_7SEG_BASE,
-				DB88F5281_7SEG_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE,
-				DB88F5281_NOR_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV2,	DB88F5281_NAND_BASE,
-				DB88F5281_NAND_SIZE, -1);
-
-	/*
-	 * Setup Multiplexing Pins:
-	 * MPP0: GPIO (USB Over Current)	MPP1: GPIO (USB Vbat input)
-	 * MPP2: PCI_REQn[2]			MPP3: PCI_GNTn[2]
-	 * MPP4: PCI_REQn[3]			MPP5: PCI_GNTn[3]
-	 * MPP6: GPIO (JP0, CON17.2)		MPP7: GPIO (JP1, CON17.1)
-	 * MPP8: GPIO (JP2, CON11.2)		MPP9: GPIO (JP3, CON11.3)
-	 * MPP10: GPIO (RTC int)		MPP11: GPIO (Baud Rate Generator)
-	 * MPP12: GPIO (PCI int 1)		MPP13: GPIO (PCI int 2)
-	 * MPP14: NAND_REn[2]			MPP15: NAND_WEn[2]
-	 * MPP16: UART1_RX			MPP17: UART1_TX
-	 * MPP18: UART1_CTS			MPP19: UART1_RTS
-	 * MPP-DEV: DEV_D[16:31]
-	 */
-	orion_write(MPP_0_7_CTRL, 0x00222203);
-	orion_write(MPP_8_15_CTRL, 0x44000000);
-	orion_write(MPP_16_19_CTRL, 0);
-	orion_write(MPP_DEV_CTRL, 0);
-
-	orion_gpio_set_valid_pins(0x00003fc3);
-
-	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
-	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-	orion_eth_init(&db88f5281_eth_data);
-}
-
-MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
-	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
-	.init_machine	= db88f5281_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
-MACHINE_END
diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c
deleted file mode 100644
index 02b280c2482..00000000000
--- a/arch/arm/mach-orion/dns323-setup.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * arch/arm/mach-orion/dns323-setup.c
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
-#include "common.h"
-
-#define DNS323_GPIO_LED_RIGHT_AMBER	1
-#define DNS323_GPIO_LED_LEFT_AMBER	2
-#define DNS323_GPIO_LED_POWER		5
-#define DNS323_GPIO_OVERTEMP		6
-#define DNS323_GPIO_RTC			7
-#define DNS323_GPIO_POWER_OFF		8
-#define DNS323_GPIO_KEY_POWER		9
-#define DNS323_GPIO_KEY_RESET		10
-
-/****************************************************************************
- * PCI setup
- */
-
-static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/* PCI-E */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
-
-	pr_err("%s: requested mapping for unknown bus\n", __func__);
-
-	return -1;
-}
-
-static struct hw_pci dns323_pci __initdata = {
-	.nr_controllers = 1,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
-	.map_irq	= dns323_pci_map_irq,
-};
-
-static int __init dns323_pci_init(void)
-{
-	if (machine_is_dns323())
-		pci_common_init(&dns323_pci);
-
-	return 0;
-}
-
-subsys_initcall(dns323_pci_init);
-
-/****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
-	.phy_addr = 8,
-	.force_phy_addr = 1,
-};
-
-/****************************************************************************
- * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
- *
- * Layout as used by D-Link:
- *  0x00000000-0x00010000 : "MTD1"
- *  0x00010000-0x00020000 : "MTD2"
- *  0x00020000-0x001a0000 : "Linux Kernel"
- *  0x001a0000-0x007d0000 : "File System"
- *  0x007d0000-0x00800000 : "u-boot"
- */
-
-#define DNS323_NOR_BOOT_BASE 0xf4000000
-#define DNS323_NOR_BOOT_SIZE SZ_8M
-
-static struct mtd_partition dns323_partitions[] = {
-	{
-		.name	= "MTD1",
-		.size	= 0x00010000,
-		.offset	= 0,
-	}, {
-		.name	= "MTD2",
-		.size	= 0x00010000,
-		.offset = 0x00010000,
-	}, {
-		.name	= "Linux Kernel",
-		.size	= 0x00180000,
-		.offset	= 0x00020000,
-	}, {
-		.name	= "File System",
-		.size	= 0x00630000,
-		.offset	= 0x001A0000,
-	}, {
-		.name	= "u-boot",
-		.size	= 0x00030000,
-		.offset	= 0x007d0000,
-	}
-};
-
-static struct physmap_flash_data dns323_nor_flash_data = {
-	.width		= 1,
-	.parts		= dns323_partitions,
-	.nr_parts	= ARRAY_SIZE(dns323_partitions)
-};
-
-static struct resource dns323_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DNS323_NOR_BOOT_BASE,
-	.end		= DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device dns323_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= { .platform_data = &dns323_nor_flash_data, },
-	.resource	= &dns323_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-/****************************************************************************
- * GPIO LEDs (simple - doesn't use hardware blinking support)
- */
-
-static struct gpio_led dns323_leds[] = {
-	{
-		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER,
-		.active_low = 1,
-	}, {
-		.name = "right:amber",
-		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
-	}, {
-		.name = "left:amber",
-		.gpio = DNS323_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data dns323_led_data = {
-	.num_leds	= ARRAY_SIZE(dns323_leds),
-	.leds		= dns323_leds,
-};
-
-static struct platform_device dns323_gpio_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= { .platform_data = &dns323_led_data, },
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- */
-
-static struct gpio_keys_button dns323_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= DNS323_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_POWER,
-		.gpio		= DNS323_GPIO_KEY_POWER,
-		.desc		= "Power Button",
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_platform_data dns323_button_data = {
-	.buttons	= dns323_buttons,
-	.nbuttons       = ARRAY_SIZE(dns323_buttons),
-};
-
-static struct platform_device dns323_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= { .platform_data  = &dns323_button_data, },
-};
-
-/****************************************************************************
- * General Setup
- */
-
-static struct platform_device *dns323_plat_devices[] __initdata = {
-	&dns323_nor_flash,
-	&dns323_gpio_leds,
-	&dns323_button_device,
-};
-
-/*
- * On the DNS-323 the following devices are attached via I2C:
- *
- *  i2c addr | chip        | description
- *  0x3e     | GMT G760Af  | fan speed PWM controller
- *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
- *  0x68     | ST M41T80   | RTC w/ alarm
- */
-static struct i2c_board_info __initdata dns323_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("g760a", 0x3e),
-		.type = "g760a",
-	},
-#if 0
-	/* this entry requires the new-style driver model lm75 driver,
-	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
-	{
-		I2C_BOARD_INFO("lm75", 0x48),
-		.type = "g751",
-	},
-#endif
-	{
-		I2C_BOARD_INFO("rtc-m41t80", 0x68),
-		.type = "m41t80",
-	}
-};
-
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
-{
-	pr_info("%s: triggering power-off...\n", __func__);
-	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
-}
-
-static void __init dns323_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion_init();
-
-	/* setup flash mapping
-	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
-	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE,
-			    DNS323_NOR_BOOT_SIZE, -1);
-
-	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
-	 *
-	 * Open a special address decode windows for the PCIE WA.
-	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070,
-		    (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
-
-	/* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
-	orion_write(MPP_0_7_CTRL, 0);
-	orion_write(MPP_8_15_CTRL, 0);
-	orion_write(MPP_16_19_CTRL, 0);
-	orion_write(MPP_DEV_CTRL, 0);
-
-	/* Define used GPIO pins
-
-	  GPIO Map:
-
-	  |  0 |     | PEX_RST_OUT (not controlled by GPIO)
-	  |  1 | Out | right amber LED (= sata ch0 LED)  (low-active)
-	  |  2 | Out | left  amber LED (= sata ch1 LED)  (low-active)
-	  |  3 | Out | //unknown//
-	  |  4 | Out | power button LED (low-active, together with pin #5)
-	  |  5 | Out | power button LED (low-active, together with pin #4)
-	  |  6 | In  | GMT G751-2f overtemp. shutdown signal (low-active)
-	  |  7 | In  | M41T80 nIRQ/OUT/SQW signal
-	  |  8 | Out | triggers power off (high-active)
-	  |  9 | In  | power button switch (low-active)
-	  | 10 | In  | reset button switch (low-active)
-	  | 11 | Out | //unknown//
-	  | 12 | Out | //unknown//
-	  | 13 | Out | //unknown//
-	  | 14 | Out | //unknown//
-	  | 15 | Out | //unknown//
-	*/
-	orion_gpio_set_valid_pins(0x07f6);
-
-	/* register dns323 specific power-off method */
-	if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
-	    || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
-		pr_err("DNS323: failed to setup power-off GPIO\n");
-
-	pm_power_off = dns323_power_off;
-
-	/* register flash and other platform devices */
-	platform_add_devices(dns323_plat_devices,
-			     ARRAY_SIZE(dns323_plat_devices));
-
-	i2c_register_board_info(0, dns323_i2c_devices,
-				ARRAY_SIZE(dns323_i2c_devices));
-
-	orion_eth_init(&dns323_eth_data);
-}
-
-/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
-MACHINE_START(DNS323, "D-Link DNS-323")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-	.boot_params	= 0x00000100,
-	.init_machine	= dns323_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
-MACHINE_END
diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c
deleted file mode 100644
index d5f00c86d61..00000000000
--- a/arch/arm/mach-orion/gpio.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * arch/arm/mach-orion/gpio.c
- *
- * GPIO functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#include <asm/gpio.h>
-#include <asm/arch/orion.h>
-#include "common.h"
-
-static DEFINE_SPINLOCK(gpio_lock);
-static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
-static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
-
-void __init orion_gpio_set_valid_pins(u32 pins)
-{
-	gpio_valid[0] = pins;
-}
-
-/*
- * GENERIC_GPIO primitives
- */
-int gpio_direction_input(unsigned pin)
-{
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might have not used the gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (!gpio_label[pin])
-		gpio_label[pin] = "?";
-
-	orion_setbits(GPIO_IO_CONF, 1 << pin);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
-	unsigned long flags;
-	int mask;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might have not used the gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (!gpio_label[pin])
-		gpio_label[pin] = "?";
-
-	mask = 1 << pin;
-	orion_clrbits(GPIO_BLINK_EN, mask);
-	if (value)
-		orion_setbits(GPIO_OUT, mask);
-	else
-		orion_clrbits(GPIO_OUT, mask);
-	orion_clrbits(GPIO_IO_CONF, mask);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-int gpio_get_value(unsigned pin)
-{
-	int val, mask = 1 << pin;
-
-	if (orion_read(GPIO_IO_CONF) & mask)
-		val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL);
-	else
-		val = orion_read(GPIO_OUT);
-
-	return val & mask;
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned pin, int value)
-{
-	unsigned long flags;
-	int mask = 1 << pin;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	orion_clrbits(GPIO_BLINK_EN, mask);
-	if (value)
-		orion_setbits(GPIO_OUT, mask);
-	else
-		orion_clrbits(GPIO_OUT, mask);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-void orion_gpio_set_blink(unsigned pin, int blink)
-{
-	unsigned long flags;
-	int mask = 1 << pin;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	orion_clrbits(GPIO_OUT, mask);
-	if (blink)
-		orion_setbits(GPIO_BLINK_EN, mask);
-	else
-		orion_clrbits(GPIO_BLINK_EN, mask);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(orion_gpio_set_blink);
-
-int gpio_request(unsigned pin, const char *label)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	if (gpio_label[pin]) {
-		pr_debug("%s: GPIO %d already used as %s\n",
-			 __FUNCTION__, pin, gpio_label[pin]);
-		ret = -EBUSY;
-	} else
-		gpio_label[pin] = label ? label : "?";
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned pin)
-{
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
-		return;
-	}
-
-	if (!gpio_label[pin])
-		pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin);
-	else
-		gpio_label[pin] = NULL;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* Debug helper */
-void gpio_display(void)
-{
-	int i;
-
-	for (i = 0; i < GPIO_MAX; i++) {
-		printk(KERN_DEBUG "Pin-%d: ", i);
-
-		if (!test_bit(i, gpio_valid)) {
-			printk("non-GPIO\n");
-		} else if (!gpio_label[i]) {
-			printk("GPIO, free\n");
-		} else {
-			printk("GPIO, used by %s, ", gpio_label[i]);
-			if (orion_read(GPIO_IO_CONF) & (1 << i)) {
-				printk("input, active %s, level %s, edge %s\n",
-				((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-				((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-				((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
-			} else {
-				printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1);
-			}
-		}
-	}
-
-	printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
-				MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL));
-	printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
-				MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL));
-	printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
-				MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL));
-	printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
-				MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL));
-	printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
-				GPIO_OUT, orion_read(GPIO_OUT));
-	printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
-				GPIO_IO_CONF, orion_read(GPIO_IO_CONF));
-	printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
-				GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN));
-	printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
-				GPIO_IN_POL, orion_read(GPIO_IN_POL));
-	printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
-				GPIO_DATA_IN, orion_read(GPIO_DATA_IN));
-	printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
-				GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK));
-	printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE));
-	printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK));
-}
diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c
deleted file mode 100644
index df7e12ad378..00000000000
--- a/arch/arm/mach-orion/irq.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-orion/irq.c
- *
- * Core IRQ functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/gpio.h>
-#include <asm/arch/orion.h>
-#include "common.h"
-
-/*****************************************************************************
- * Orion GPIO IRQ
- *
- * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same
- * value of the line or the opposite value.
- *
- * Level IRQ handlers: DATA_IN is used directly as cause register.
- *                     Interrupt are masked by LEVEL_MASK registers.
- * Edge IRQ handlers:  Change in DATA_IN are latched in EDGE_CAUSE.
- *                     Interrupt are masked by EDGE_MASK registers.
- * Both-edge handlers: Similar to regular Edge handlers, but also swaps
- *                     the polarity to catch the next line transaction.
- *                     This is a race condition that might not perfectly
- *                     work on some use cases.
- *
- * Every eight GPIO lines are grouped (OR'ed) before going up to main
- * cause register.
- *
- *                    EDGE  cause    mask
- *        data-in   /--------| |-----| |----\
- *     -----| |-----                         ---- to main cause reg
- *           X      \----------------| |----/
- *        polarity    LEVEL          mask
- *
- ****************************************************************************/
-static void orion_gpio_irq_ack(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	if (irq_desc[irq].status & IRQ_LEVEL)
-		/*
-		 * Mask bit for level interrupt
-		 */
-		orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
-	else
-		/*
-		 * Clear casue bit for egde interrupt
-		 */
-		orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
-}
-
-static void orion_gpio_irq_mask(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
-	else
-		orion_clrbits(GPIO_EDGE_MASK, 1 << pin);
-}
-
-static void orion_gpio_irq_unmask(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion_setbits(GPIO_LEVEL_MASK, 1 << pin);
-	else
-		orion_setbits(GPIO_EDGE_MASK, 1 << pin);
-}
-
-static int orion_gpio_set_irq_type(u32 irq, u32 type)
-{
-	int pin = irq_to_gpio(irq);
-	struct irq_desc *desc;
-
-	if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
-		printk(KERN_ERR "orion_gpio_set_irq_type failed "
-				"(irq %d, pin %d).\n", irq, pin);
-		return -EINVAL;
-	}
-
-	desc = irq_desc + irq;
-
-	switch (type) {
-	case IRQT_HIGH:
-		desc->handle_irq = handle_level_irq;
-		desc->status |= IRQ_LEVEL;
-		orion_clrbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQT_LOW:
-		desc->handle_irq = handle_level_irq;
-		desc->status |= IRQ_LEVEL;
-		orion_setbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQT_RISING:
-		desc->handle_irq = handle_edge_irq;
-		desc->status &= ~IRQ_LEVEL;
-		orion_clrbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQT_FALLING:
-		desc->handle_irq = handle_edge_irq;
-		desc->status &= ~IRQ_LEVEL;
-		orion_setbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQT_BOTHEDGE:
-		desc->handle_irq = handle_edge_irq;
-		desc->status &= ~IRQ_LEVEL;
-		/*
-		 * set initial polarity based on current input level
-		 */
-		if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN))
-		    & (1 << pin))
-			orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
-		else
-			orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
-
-		break;
-	default:
-		printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
-		return -EINVAL;
-	}
-
-	desc->status &= ~IRQ_TYPE_SENSE_MASK;
-	desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
-	return 0;
-}
-
-static struct irq_chip orion_gpio_irq_chip = {
-	.name		= "Orion-IRQ-GPIO",
-	.ack		= orion_gpio_irq_ack,
-	.mask		= orion_gpio_irq_mask,
-	.unmask		= orion_gpio_irq_unmask,
-	.set_type	= orion_gpio_set_irq_type,
-};
-
-static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u32 cause, offs, pin;
-
-	BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31);
-	offs = (irq - IRQ_ORION_GPIO_0_7) * 8;
-	cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) |
-		(orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK));
-
-	for (pin = offs; pin < offs + 8; pin++) {
-		if (cause & (1 << pin)) {
-			irq = gpio_to_irq(pin);
-			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
-				/* Swap polarity (race with GPIO line) */
-				u32 polarity = orion_read(GPIO_IN_POL);
-				polarity ^= 1 << pin;
-				orion_write(GPIO_IN_POL, polarity);
-			}
-			desc_handle_irq(irq, desc);
-		}
-	}
-}
-
-static void __init orion_init_gpio_irq(void)
-{
-	int i;
-	struct irq_desc *desc;
-
-	/*
-	 * Mask and clear GPIO IRQ interrupts
-	 */
-	orion_write(GPIO_LEVEL_MASK, 0x0);
-	orion_write(GPIO_EDGE_MASK, 0x0);
-	orion_write(GPIO_EDGE_CAUSE, 0x0);
-
-	/*
-	 * Register chained level handlers for GPIO IRQs by default.
-	 * User can use set_type() if he wants to use edge types handlers.
-	 */
-	for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		desc = irq_desc + i;
-		desc->status |= IRQ_LEVEL;
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler);
-}
-
-/*****************************************************************************
- * Orion Main IRQ
- ****************************************************************************/
-static void orion_main_irq_mask(u32 irq)
-{
-	orion_clrbits(MAIN_IRQ_MASK, 1 << irq);
-}
-
-static void orion_main_irq_unmask(u32 irq)
-{
-	orion_setbits(MAIN_IRQ_MASK, 1 << irq);
-}
-
-static struct irq_chip orion_main_irq_chip = {
-	.name		= "Orion-IRQ-Main",
-	.ack		= orion_main_irq_mask,
-	.mask		= orion_main_irq_mask,
-	.unmask		= orion_main_irq_unmask,
-};
-
-static void __init orion_init_main_irq(void)
-{
-	int i;
-
-	/*
-	 * Mask and clear Main IRQ interrupts
-	 */
-	orion_write(MAIN_IRQ_MASK, 0x0);
-	orion_write(MAIN_IRQ_CAUSE, 0x0);
-
-	/*
-	 * Register level handler for Main IRQs
-	 */
-	for (i = 0; i < IRQ_ORION_GPIO_START; i++) {
-		set_irq_chip(i, &orion_main_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-}
-
-void __init orion_init_irq(void)
-{
-	orion_init_main_irq();
-	orion_init_gpio_irq();
-}
diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c
deleted file mode 100644
index 6817aca4aa2..00000000000
--- a/arch/arm/mach-orion/kurobox_pro-setup.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * arch/arm/mach-orion/kurobox_pro-setup.c
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
-#include "common.h"
-
-/*****************************************************************************
- * KUROBOX-PRO Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define KUROBOX_PRO_NOR_BOOT_BASE	0xf4000000
-#define KUROBOX_PRO_NOR_BOOT_SIZE	SZ_256K
-
-/*
- * 256M NAND flash on Device bus chip select 1
- */
-
-#define KUROBOX_PRO_NAND_BASE		0xfc000000
-#define KUROBOX_PRO_NAND_SIZE		SZ_2M
-
-/*****************************************************************************
- * 256MB NAND Flash on Device bus CS0
- ****************************************************************************/
-
-static struct mtd_partition kurobox_pro_nand_parts[] = {
-	{
-		.name	= "uImage",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= SZ_4M,
-		.size	= SZ_64M,
-	},
-	{
-		.name	= "extra",
-		.offset	= SZ_4M + SZ_64M,
-		.size	= SZ_256M - (SZ_4M + SZ_64M),
-	},
-};
-
-static struct resource kurobox_pro_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KUROBOX_PRO_NAND_BASE,
-	.end		= KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data kurobox_pro_nand_data = {
-	.parts		= kurobox_pro_nand_parts,
-	.nr_parts	= ARRAY_SIZE(kurobox_pro_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device kurobox_pro_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &kurobox_pro_nand_data,
-	},
-	.resource	= &kurobox_pro_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data kurobox_pro_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource kurobox_pro_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= KUROBOX_PRO_NOR_BOOT_BASE,
-	.end			= KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device kurobox_pro_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &kurobox_pro_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &kurobox_pro_nor_flash_resource,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * PCI isn't used on the Kuro
-	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
-	else
-		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
-
-	return -1;
-}
-
-static struct hw_pci kurobox_pro_pci __initdata = {
-	.nr_controllers	= 1,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
-	.map_irq	= kurobox_pro_pci_map_irq,
-};
-
-static int __init kurobox_pro_pci_init(void)
-{
-	if (machine_is_kurobox_pro())
-		pci_common_init(&kurobox_pro_pci);
-
-	return 0;
-}
-
-subsys_initcall(kurobox_pro_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
-	.phy_addr	= 8,
-	.force_phy_addr = 1,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
-       .driver_name    = "rtc-rs5c372",
-       .type           = "rs5c372a",
-       .addr           = 0x32,
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data kurobox_pro_sata_data = {
-	.n_ports        = 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static struct platform_device *kurobox_pro_devices[] __initdata = {
-	&kurobox_pro_nor_flash,
-	&kurobox_pro_nand_flash,
-};
-
-static void __init kurobox_pro_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion_init();
-
-	/*
-	 * Setup the CPU address decode windows for our devices
-	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE,
-				KUROBOX_PRO_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV0,	KUROBOX_PRO_NAND_BASE,
-				KUROBOX_PRO_NAND_SIZE, -1);
-	/*
-	 * Open a special address decode windows for the PCIE WA.
-	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
-
-	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0-1] Not used
-	 * MPP[2] GPIO Micon
-	 * MPP[3] GPIO RTC
-	 * MPP[4-5] Not used
-	 * MPP[6] Nand Flash REn
-	 * MPP[7] Nand Flash WEn
-	 * MPP[8-11] Not used
-	 * MPP[12] SATA 0 presence Indication
-	 * MPP[13] SATA 1 presence Indication
-	 * MPP[14] SATA 0 active Indication
-	 * MPP[15] SATA 1 active indication
-	 * MPP[16-19] Not used
-	 */
-	orion_write(MPP_0_7_CTRL, 0x44220003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x0);
-
-	orion_gpio_set_valid_pins(0x0000000c);
-
-	platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
-	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-	orion_eth_init(&kurobox_pro_eth_data);
-	orion_sata_init(&kurobox_pro_sata_data);
-}
-
-MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-	.boot_params	= 0x00000100,
-	.init_machine	= kurobox_pro_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
-MACHINE_END
diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c
deleted file mode 100644
index b109bb46681..00000000000
--- a/arch/arm/mach-orion/pci.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * arch/arm/mach-orion/pci.c
- *
- * PCI and PCIE functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-
-/*****************************************************************************
- * Orion has one PCIE controller and one PCI controller.
- *
- * Note1: The local PCIE bus number is '0'. The local PCI bus number
- * follows the scanned PCIE bridged busses, if any.
- *
- * Note2: It is possible for PCI/PCIE agents to access many subsystem's
- * space, by configuring BARs and Address Decode Windows, e.g. flashes on
- * device bus, Orion registers, etc. However this code only enable the
- * access to DDR banks.
- ****************************************************************************/
-
-
-/*****************************************************************************
- * PCIE controller
- ****************************************************************************/
-#define PCIE_CTRL		ORION_PCIE_REG(0x1a00)
-#define PCIE_STAT		ORION_PCIE_REG(0x1a04)
-#define PCIE_DEV_ID		ORION_PCIE_REG(0x0000)
-#define PCIE_CMD_STAT		ORION_PCIE_REG(0x0004)
-#define PCIE_DEV_REV		ORION_PCIE_REG(0x0008)
-#define PCIE_MASK		ORION_PCIE_REG(0x1910)
-#define PCIE_CONF_ADDR		ORION_PCIE_REG(0x18f8)
-#define PCIE_CONF_DATA		ORION_PCIE_REG(0x18fc)
-
-/*
- * PCIE_STAT bits
- */
-#define PCIE_STAT_LINK_DOWN		1
-#define PCIE_STAT_BUS_OFFS		8
-#define PCIE_STAT_BUS_MASK		(0xff << PCIE_STAT_BUS_OFFS)
-#define PCIE_STAT_DEV_OFFS		20
-#define PCIE_STAT_DEV_MASK		(0x1f << PCIE_STAT_DEV_OFFS)
-
-/*
- * PCIE_CONF_ADDR bits
- */
-#define PCIE_CONF_REG(r)		((((r) & 0xf00) << 24) | ((r) & 0xfc))
-#define PCIE_CONF_FUNC(f)		(((f) & 0x3) << 8)
-#define PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
-#define PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
-#define PCIE_CONF_ADDR_EN		(1 << 31)
-
-/*
- * PCIE config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-static DEFINE_SPINLOCK(orion_pcie_lock);
-
-void orion_pcie_id(u32 *dev, u32 *rev)
-{
-	*dev = orion_read(PCIE_DEV_ID) >> 16;
-	*rev = orion_read(PCIE_DEV_REV) & 0xff;
-}
-
-u32 orion_pcie_local_bus_nr(void)
-{
-	u32 stat = orion_read(PCIE_STAT);
-	return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS);
-}
-
-static u32 orion_pcie_local_dev_nr(void)
-{
-	u32 stat = orion_read(PCIE_STAT);
-	return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS);
-}
-
-static u32 orion_pcie_no_link(void)
-{
-	u32 stat = orion_read(PCIE_STAT);
-	return(stat & PCIE_STAT_LINK_DOWN);
-}
-
-static void orion_pcie_set_bus_nr(int nr)
-{
-	orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK);
-	orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS);
-}
-
-static void orion_pcie_master_slave_enable(void)
-{
-	orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER |
-					  PCI_COMMAND_IO |
-					  PCI_COMMAND_MEMORY);
-}
-
-static void orion_pcie_enable_interrupts(void)
-{
-	/*
-	 * Enable interrupts lines
-	 * INTA[24] INTB[25] INTC[26] INTD[27]
-	 */
-	orion_setbits(PCIE_MASK, 0xf<<24);
-}
-
-static int orion_pcie_valid_config(u32 bus, u32 dev)
-{
-	/*
-	 * Don't go out when trying to access --
-	 * 1. our own device
-	 * 2. where there's no device connected (no link)
-	 * 3. nonexisting devices on local bus
-	 */
-
-	if ((orion_pcie_local_bus_nr() == bus) &&
-	   (orion_pcie_local_dev_nr() == dev))
-		return 0;
-
-	if (orion_pcie_no_link())
-		return 0;
-
-	if (bus == orion_pcie_local_bus_nr())
-		if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) ||
-		   ((orion_pcie_local_dev_nr() != 0) && (dev != 0)))
-		return 0;
-
-	return 1;
-}
-
-static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-						int size, u32 *val)
-{
-	unsigned long flags;
-	unsigned int dev, rev, pcie_addr;
-
-	if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	spin_lock_irqsave(&orion_pcie_lock, flags);
-
-	orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
-			PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-			PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-			PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
-
-	orion_pcie_id(&dev, &rev);
-	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
-		/* extended register space */
-		pcie_addr = ORION_PCIE_WA_VIRT_BASE;
-		pcie_addr |= PCIE_CONF_BUS(bus->number) |
-			PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-			PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-			PCIE_CONF_REG(where);
-		*val = orion_read(pcie_addr);
-	} else
-		*val = orion_read(PCIE_CONF_DATA);
-
-	if (size == 1)
-		*val = (*val >> (8*(where & 0x3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8*(where & 0x3))) & 0xffff;
-
-	spin_unlock_irqrestore(&orion_pcie_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where,
-						int size, u32 val)
-{
-	unsigned long flags;
-	int ret;
-
-	if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&orion_pcie_lock, flags);
-
-	ret = PCIBIOS_SUCCESSFUL;
-
-	orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
-			PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-			PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-			PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
-
-	if (size == 4) {
-		__raw_writel(val, PCIE_CONF_DATA);
-	} else if (size == 2) {
-		__raw_writew(val, PCIE_CONF_DATA + (where & 0x3));
-	} else if (size == 1) {
-		__raw_writeb(val, PCIE_CONF_DATA + (where & 0x3));
-	} else {
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	spin_unlock_irqrestore(&orion_pcie_lock, flags);
-
-	return ret;
-}
-
-struct pci_ops orion_pcie_ops = {
-	.read = orion_pcie_rd_conf,
-	.write = orion_pcie_wr_conf,
-};
-
-
-static int orion_pcie_setup(struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	/*
-	 * Master + Slave enable
-	 */
-	orion_pcie_master_slave_enable();
-
-	/*
-	 * Enable interrupts lines A-D
-	 */
-	orion_pcie_enable_interrupts();
-
-	/*
-	 * Request resource
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("orion_pci_setup unable to alloc resources");
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	res[0].name = "PCI-EX I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIE IO resource failed\n");
-	sys->resource[0] = &res[0];
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	res[1].name = "PCI-EX Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION_PCIE_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCIE Memory resource failed\n");
-	sys->resource[1] = &res[1];
-
-	sys->resource[2] = NULL;
-	sys->io_offset = 0;
-
-	return 1;
-}
-
-/*****************************************************************************
- * PCI controller
- ****************************************************************************/
-#define PCI_MODE		ORION_PCI_REG(0xd00)
-#define PCI_CMD			ORION_PCI_REG(0xc00)
-#define PCI_P2P_CONF		ORION_PCI_REG(0x1d14)
-#define PCI_CONF_ADDR		ORION_PCI_REG(0xc78)
-#define PCI_CONF_DATA		ORION_PCI_REG(0xc7c)
-
-/*
- * PCI_MODE bits
- */
-#define PCI_MODE_64BIT			(1 << 2)
-#define PCI_MODE_PCIX			((1 << 4) | (1 << 5))
-
-/*
- * PCI_CMD bits
- */
-#define PCI_CMD_HOST_REORDER		(1 << 29)
-
-/*
- * PCI_P2P_CONF bits
- */
-#define PCI_P2P_BUS_OFFS		16
-#define PCI_P2P_BUS_MASK		(0xff << PCI_P2P_BUS_OFFS)
-#define PCI_P2P_DEV_OFFS		24
-#define PCI_P2P_DEV_MASK		(0x1f << PCI_P2P_DEV_OFFS)
-
-/*
- * PCI_CONF_ADDR bits
- */
-#define PCI_CONF_REG(reg)		((reg) & 0xfc)
-#define PCI_CONF_FUNC(func)		(((func) & 0x3) << 8)
-#define PCI_CONF_DEV(dev)		(((dev) & 0x1f) << 11)
-#define PCI_CONF_BUS(bus)		(((bus) & 0xff) << 16)
-#define PCI_CONF_ADDR_EN		(1 << 31)
-
-/*
- * Internal configuration space
- */
-#define PCI_CONF_FUNC_STAT_CMD		0
-#define PCI_CONF_REG_STAT_CMD		4
-#define PCIX_STAT			0x64
-#define PCIX_STAT_BUS_OFFS		8
-#define PCIX_STAT_BUS_MASK		(0xff << PCIX_STAT_BUS_OFFS)
-
-/*
- * PCI config cycles are done by programming the PCI_CONF_ADDR register
- * and then reading the PCI_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-static DEFINE_SPINLOCK(orion_pci_lock);
-
-u32 orion_pci_local_bus_nr(void)
-{
-	u32 conf = orion_read(PCI_P2P_CONF);
-	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
-}
-
-u32 orion_pci_local_dev_nr(void)
-{
-	u32 conf = orion_read(PCI_P2P_CONF);
-	return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS);
-}
-
-int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func,
-					u32 where, u32 size, u32 *val)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&orion_pci_lock, flags);
-
-	orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
-
-	*val = orion_read(PCI_CONF_DATA);
-
-	if (size == 1)
-		*val = (*val >> (8*(where & 0x3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8*(where & 0x3))) & 0xffff;
-
-	spin_unlock_irqrestore(&orion_pci_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func,
-					u32 where, u32 size, u32 val)
-{
-	unsigned long flags;
-	int ret = PCIBIOS_SUCCESSFUL;
-
-	spin_lock_irqsave(&orion_pci_lock, flags);
-
-	orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
-
-	if (size == 4) {
-		__raw_writel(val, PCI_CONF_DATA);
-	} else if (size == 2) {
-		__raw_writew(val, PCI_CONF_DATA + (where & 0x3));
-	} else if (size == 1) {
-		__raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
-	} else {
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	spin_unlock_irqrestore(&orion_pci_lock, flags);
-
-	return ret;
-}
-
-static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn,
-				int where, int size, u32 *val)
-{
-	/*
-	 * Don't go out for local device
-	 */
-	if ((orion_pci_local_bus_nr() == bus->number) &&
-	   (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
-					PCI_FUNC(devfn), where, size, val);
-}
-
-static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn,
-				int where, int size, u32 val)
-{
-	/*
-	 * Don't go out for local device
-	 */
-	if ((orion_pci_local_bus_nr() == bus->number) &&
-	   (orion_pci_local_dev_nr() == PCI_SLOT(devfn)))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
-					PCI_FUNC(devfn), where, size, val);
-}
-
-struct pci_ops orion_pci_ops = {
-	.read = orion_pci_rd_conf,
-	.write = orion_pci_wr_conf,
-};
-
-static void orion_pci_set_bus_nr(int nr)
-{
-	u32 p2p = orion_read(PCI_P2P_CONF);
-
-	if (orion_read(PCI_MODE) & PCI_MODE_PCIX) {
-		/*
-		 * PCI-X mode
-		 */
-		u32 pcix_status, bus, dev;
-		bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
-		dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
-		orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
-		pcix_status &= ~PCIX_STAT_BUS_MASK;
-		pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
-		orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
-	} else {
-		/*
-		 * PCI Conventional mode
-		 */
-		p2p &= ~PCI_P2P_BUS_MASK;
-		p2p |= (nr << PCI_P2P_BUS_OFFS);
-		orion_write(PCI_P2P_CONF, p2p);
-	}
-}
-
-static void orion_pci_master_slave_enable(void)
-{
-	u32 bus_nr, dev_nr, func, reg, val;
-
-	bus_nr = orion_pci_local_bus_nr();
-	dev_nr = orion_pci_local_dev_nr();
-	func = PCI_CONF_FUNC_STAT_CMD;
-	reg = PCI_CONF_REG_STAT_CMD;
-	orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val);
-	val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7);
-}
-
-static int orion_pci_setup(struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	/*
-	 * Master + Slave enable
-	 */
-	orion_pci_master_slave_enable();
-
-	/*
-	 * Force ordering
-	 */
-	orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
-
-	/*
-	 * Request resources
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("orion_pci_setup unable to alloc resources");
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	res[0].name = "PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION_PCI_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCI IO resource failed\n");
-	sys->resource[0] = &res[0];
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	res[1].name = "PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION_PCI_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCI Memory resource failed\n");
-	sys->resource[1] = &res[1];
-
-	sys->resource[2] = NULL;
-	sys->io_offset = 0;
-
-	return 1;
-}
-
-
-/*****************************************************************************
- * General PCIE + PCI
- ****************************************************************************/
-int orion_pci_sys_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	if (nr == 0) {
-		/*
-		 * PCIE setup
-		 */
-		orion_pcie_set_bus_nr(0);
-		ret = orion_pcie_setup(sys);
-	} else if (nr == 1) {
-		/*
-		 * PCI setup
-		 */
-		ret = orion_pci_setup(sys);
-	}
-
-	return ret;
-}
-
-struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_ops *ops;
-	struct pci_bus *bus;
-
-
-	if (nr == 0) {
-		u32 pci_bus;
-		/*
-		 * PCIE scan
-		 */
-		ops = &orion_pcie_ops;
-		bus = pci_scan_bus(sys->busnr, ops, sys);
-		/*
-		 * Set local PCI bus number to follow PCIE bridges (if any)
-		 */
-		pci_bus	= bus->number + bus->subordinate - bus->secondary + 1;
-		orion_pci_set_bus_nr(pci_bus);
-	} else if (nr == 1) {
-		/*
-		 * PCI scan
-		 */
-		ops = &orion_pci_ops;
-		bus = pci_scan_bus(sys->busnr, ops, sys);
-	} else {
-		BUG();
-		bus = NULL;
-	}
-
-	return bus;
-}
diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c
deleted file mode 100644
index e851b8ca5ac..00000000000
--- a/arch/arm/mach-orion/rd88f5182-setup.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * arch/arm/mach-orion/rd88f5182-setup.c
- *
- * Marvell Orion-NAS Reference Design Setup
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
-#include "common.h"
-
-/*****************************************************************************
- * RD-88F5182 Info
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define RD88F5182_NOR_BOOT_BASE		0xf4000000
-#define RD88F5182_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 16M NOR flash on Device bus chip select 1
- */
-
-#define RD88F5182_NOR_BASE		0xfc000000
-#define RD88F5182_NOR_SIZE		SZ_16M
-
-/*
- * PCI
- */
-
-#define RD88F5182_PCI_SLOT0_OFFS	7
-#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
-#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
-
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED		0
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data rd88f5182_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5182_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= RD88F5182_NOR_BASE,
-	.end			= RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
-};
-
-static struct platform_device rd88f5182_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5182_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5182_nor_flash_resource,
-};
-
-#ifdef CONFIG_LEDS
-
-/*****************************************************************************
- * Use GPIO debug led as CPU active indication
- ****************************************************************************/
-
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
-	int val;
-
-	if (evt == led_idle_end)
-		val = 1;
-	else if (evt == led_idle_start)
-		val = 0;
-	else
-		return;
-
-	gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
-	int pin;
-
-	if (machine_is_rd88f5182()) {
-		pin = RD88F5182_GPIO_DBG_LED;
-
-		if (gpio_request(pin, "DBGLED") == 0) {
-			if (gpio_direction_output(pin, 0) != 0) {
-				printk(KERN_ERR "rd88f5182_dbgled_init failed "
-						"to set output pin %d\n", pin);
-				gpio_free(pin);
-				return 0;
-			}
-		} else {
-			printk(KERN_ERR "rd88f5182_dbgled_init failed "
-					"to request gpio %d\n", pin);
-			return 0;
-		}
-
-		leds_event = rd88f5182_dbgled_event;
-	}
-	return 0;
-}
-
-__initcall(rd88f5182_dbgled_init);
-
-#endif
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-void __init rd88f5182_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
-	if (gpio_request(pin, "PCI IntA") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
-	}
-
-	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
-	if (gpio_request(pin, "PCI IntB") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * PCI-E isn't used on the RD2
-	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
-	case 0:
-		if (pin == 1)
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
-		else
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci rd88f5182_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= rd88f5182_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
-	.map_irq	= rd88f5182_pci_map_irq,
-};
-
-static int __init rd88f5182_pci_init(void)
-{
-	if (machine_is_rd88f5182())
-		pci_common_init(&rd88f5182_pci);
-
-	return 0;
-}
-
-subsys_initcall(rd88f5182_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
-	.phy_addr	= 8,
-	.force_phy_addr = 1,
-};
-
-/*****************************************************************************
- * RTC DS1338 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
-	.driver_name	= "rtc-ds1307",
-	.type		= "ds1338",
-	.addr		= 0x68,
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-static struct mv_sata_platform_data rd88f5182_sata_data = {
-	.n_ports        = 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static struct platform_device *rd88f5182_devices[] __initdata = {
-	&rd88f5182_nor_flash,
-};
-
-static void __init rd88f5182_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion_init();
-
-	/*
-	 * Setup the CPU address decode windows for our devices
-	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE,
-				RD88F5182_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE,
-				RD88F5182_NOR_SIZE, -1);
-
-	/*
-	 * Open a special address decode windows for the PCIE WA.
-	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
-
-	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0] Debug Led (GPIO - Out)
-	 * MPP[1] Debug Led (GPIO - Out)
-	 * MPP[2] N/A
-	 * MPP[3] RTC_Int (GPIO - In)
-	 * MPP[4] GPIO
-	 * MPP[5] GPIO
-	 * MPP[6] PCI_intA (GPIO - In)
-	 * MPP[7] PCI_intB (GPIO - In)
-	 * MPP[8-11] N/A
-	 * MPP[12] SATA 0 presence Indication
-	 * MPP[13] SATA 1 presence Indication
-	 * MPP[14] SATA 0 active Indication
-	 * MPP[15] SATA 1 active indication
-	 * MPP[16-19] Not used
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	orion_write(MPP_0_7_CTRL, 0x00000003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x5555);
-
-	orion_gpio_set_valid_pins(0x000000fb);
-
-	platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
-	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-	orion_eth_init(&rd88f5182_eth_data);
-	orion_sata_init(&rd88f5182_sata_data);
-}
-
-MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-	.boot_params	= 0x00000100,
-	.init_machine	= rd88f5182_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
-MACHINE_END
diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c
deleted file mode 100644
index bd4262da4f4..00000000000
--- a/arch/arm/mach-orion/time.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * arch/arm/mach-orion/time.c
- *
- * Core time functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/mach/time.h>
-#include <asm/arch/orion.h>
-#include "common.h"
-
-/*
- * Timer0: clock_event_device, Tick.
- * Timer1: clocksource, Free running.
- * WatchDog: Not used.
- *
- * Timers are counting down.
- */
-#define CLOCKEVENT	0
-#define CLOCKSOURCE	1
-
-/*
- * Timers bits
- */
-#define BRIDGE_INT_TIMER(x)	(1 << ((x) + 1))
-#define TIMER_EN(x)		(1 << ((x) * 2))
-#define TIMER_RELOAD_EN(x)	(1 << (((x) * 2) + 1))
-#define BRIDGE_INT_TIMER_WD	(1 << 3)
-#define TIMER_WD_EN		(1 << 4)
-#define TIMER_WD_RELOAD_EN	(1 << 5)
-
-static cycle_t orion_clksrc_read(void)
-{
-	return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE)));
-}
-
-static struct clocksource orion_clksrc = {
-	.name		= "orion_clocksource",
-	.shift		= 20,
-	.rating		= 300,
-	.read		= orion_clksrc_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int
-orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	if (delta == 0)
-		return -ETIME;
-
-	local_irq_save(flags);
-
-	/*
-	 * Clear and enable timer interrupt bit
-	 */
-	orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
-	orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
-
-	/*
-	 * Setup new timer value
-	 */
-	orion_write(TIMER_VAL(CLOCKEVENT), delta);
-
-	/*
-	 * Disable auto reload and kickoff the timer
-	 */
-	orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT));
-	orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT));
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void
-orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		/*
-		 * Setup latch cycles in timer and enable reload interrupt.
-		 */
-		orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH);
-		orion_write(TIMER_VAL(CLOCKEVENT), LATCH);
-		orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
-		orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
-					  TIMER_EN(CLOCKEVENT));
-	} else {
-		/*
-		 * Disable timer and interrupt
-		 */
-		orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
-		orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
-		orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
-					  TIMER_EN(CLOCKEVENT));
-	}
-
-	local_irq_restore(flags);
-}
-
-static struct clock_event_device orion_clkevt = {
-	.name		= "orion_tick",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.rating		= 300,
-	.cpumask	= CPU_MASK_CPU0,
-	.set_next_event	= orion_clkevt_next_event,
-	.set_mode	= orion_clkevt_mode,
-};
-
-static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * Clear cause bit and do event
-	 */
-	orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
-	orion_clkevt.event_handler(&orion_clkevt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
-static void orion_timer_init(void)
-{
-	/*
-	 * Setup clocksource free running timer (no interrupt on reload)
-	 */
-	orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff);
-	orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff);
-	orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE));
-	orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) |
-				  TIMER_EN(CLOCKSOURCE));
-
-	/*
-	 * Register clocksource
-	 */
-	orion_clksrc.mult =
-		clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift);
-
-	clocksource_register(&orion_clksrc);
-
-	/*
-	 * Connect and enable tick handler
-	 */
-	setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq);
-
-	/*
-	 * Register clockevent
-	 */
-	orion_clkevt.mult =
-		div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift);
-	orion_clkevt.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &orion_clkevt);
-	orion_clkevt.min_delta_ns =
-		clockevent_delta2ns(1, &orion_clkevt);
-
-	clockevents_register_device(&orion_clkevt);
-}
-
-struct sys_timer orion_timer = {
-	.init = orion_timer_init,
-};
diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c
deleted file mode 100644
index 306dbcd1e37..00000000000
--- a/arch/arm/mach-orion/ts209-setup.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * QNAP TS-109/TS-209 Board Setup
- *
- * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/serial_reg.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
-#include "common.h"
-
-#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
-#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
-
-/****************************************************************************
- * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
- *     existing QNAP firmware.
- *
- * Layout as used by QNAP:
- *  [2] 0x00000000-0x00200000 : "Kernel"
- *  [3] 0x00200000-0x00600000 : "RootFS1"
- *  [4] 0x00600000-0x00700000 : "RootFS2"
- *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
- *  [5] 0x00760000-0x00780000 : "U-Boot Config"
- *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
- ***************************************************************************/
-static struct mtd_partition qnap_ts209_partitions[] = {
-	{
-		.name       = "U-Boot",
-		.size       = 0x00080000,
-		.offset     = 0x00780000,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name   = "Kernel",
-		.size   = 0x00200000,
-		.offset = 0,
-	}, {
-		.name   = "RootFS1",
-		.size   = 0x00400000,
-		.offset = 0x00200000,
-	}, {
-		.name   = "RootFS2",
-		.size   = 0x00100000,
-		.offset = 0x00600000,
-	}, {
-		.name   = "U-Boot Config",
-		.size   = 0x00020000,
-		.offset = 0x00760000,
-	}, {
-		.name       = "NAS Config",
-		.size       = 0x00060000,
-		.offset     = 0x00700000,
-		.mask_flags = MTD_WRITEABLE,
-	}
-};
-
-static struct physmap_flash_data qnap_ts209_nor_flash_data = {
-	.width    = 1,
-	.parts    = qnap_ts209_partitions,
-	.nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
-};
-
-static struct resource qnap_ts209_nor_flash_resource = {
-	.flags = IORESOURCE_MEM,
-	.start = QNAP_TS209_NOR_BOOT_BASE,
-	.end   = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device qnap_ts209_nor_flash = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev           = { .platform_data = &qnap_ts209_nor_flash_data, },
-	.resource      = &qnap_ts209_nor_flash_resource,
-	.num_resources = 1,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-#define QNAP_TS209_PCI_SLOT0_OFFS	7
-#define QNAP_TS209_PCI_SLOT0_IRQ_PIN	6
-#define QNAP_TS209_PCI_SLOT1_IRQ_PIN	7
-
-void __init qnap_ts209_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
-		} else {
-			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
-				"%d\n", pin);
-	}
-
-	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
-		} else {
-			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
-				"%d\n", pin);
-	}
-}
-
-static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * PCIE IRQ is connected internally (not GPIO)
-	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
-	case 1:
-		return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci qnap_ts209_pci __initdata = {
-	.nr_controllers = 2,
-	.preinit        = qnap_ts209_pci_preinit,
-	.swizzle        = pci_std_swizzle,
-	.setup          = orion_pci_sys_setup,
-	.scan           = orion_pci_sys_scan_bus,
-	.map_irq        = qnap_ts209_pci_map_irq,
-};
-
-static int __init qnap_ts209_pci_init(void)
-{
-	if (machine_is_ts_x09())
-		pci_common_init(&qnap_ts209_pci);
-
-	return 0;
-}
-
-subsys_initcall(qnap_ts209_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
-	.phy_addr       = 8,
-	.force_phy_addr = 1,
-};
-
-/*****************************************************************************
- * RTC S35390A on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
-       .driver_name = "rtc-s35390a",
-       .addr        = 0x30,
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- *     Power button is attached to the PIC microcontroller
- ****************************************************************************/
-
-#define QNAP_TS209_GPIO_KEY_MEDIA	1
-#define QNAP_TS209_GPIO_KEY_RESET	2
-
-static struct gpio_keys_button qnap_ts209_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
-		.desc		= "USB Copy Button",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_POWER,
-		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_platform_data qnap_ts209_button_data = {
-	.buttons	= qnap_ts209_buttons,
-	.nbuttons       = ARRAY_SIZE(qnap_ts209_buttons),
-};
-
-static struct platform_device qnap_ts209_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= { .platform_data  = &qnap_ts209_button_data, },
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data qnap_ts209_sata_data = {
-	.n_ports        = 2,
-};
-
-/*****************************************************************************
-
- * General Setup
- ****************************************************************************/
-
-static struct platform_device *qnap_ts209_devices[] __initdata = {
-	&qnap_ts209_nor_flash,
-	&qnap_ts209_button_device,
-};
-
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-
-#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (19200,8n1) */
-	orion_write(UART1_REG(LCR), 0x83);
-	orion_write(UART1_REG(DLL), divisor & 0xff);
-	orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-	orion_write(UART1_REG(LCR), 0x03);
-	orion_write(UART1_REG(IER), 0x00);
-	orion_write(UART1_REG(FCR), 0x00);
-	orion_write(UART1_REG(MCR), 0x00);
-
-	/* send the power-off command 'A' to PIC */
-	orion_write(UART1_REG(TX), 'A');
-}
-
-static void __init qnap_ts209_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion_init();
-
-	/*
-	 * Setup flash mapping
-	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE,
-			    QNAP_TS209_NOR_BOOT_SIZE, -1);
-
-	/*
-	 * Open a special address decode windows for the PCIE WA.
-	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
-
-	/*
-	 * Setup Multiplexing Pins --
-	 * MPP[0] Reserved
-	 * MPP[1] USB copy button (0 active)
-	 * MPP[2] Load defaults button (0 active)
-	 * MPP[3] GPIO RTC
-	 * MPP[4-5] Reserved
-	 * MPP[6] PCI Int A
-	 * MPP[7] PCI Int B
-	 * MPP[8-11] Reserved
-	 * MPP[12] SATA 0 presence
-	 * MPP[13] SATA 1 presence
-	 * MPP[14] SATA 0 active
-	 * MPP[15] SATA 1 active
-	 * MPP[16] UART1 RXD
-	 * MPP[17] UART1 TXD
-	 * MPP[18] SW_RST (0 active)
-	 * MPP[19] Reserved
-	 * MPP[20] PCI clock 0
-	 * MPP[21] PCI clock 1
-	 * MPP[22] USB 0 over current
-	 * MPP[23-25] Reserved
-	 */
-	orion_write(MPP_0_7_CTRL, 0x3);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x5500);
-	orion_gpio_set_valid_pins(0x3cc0fff);
-
-	/* register ts209 specific power-off method */
-	pm_power_off = qnap_ts209_power_off;
-
-	platform_add_devices(qnap_ts209_devices,
-				ARRAY_SIZE(qnap_ts209_devices));
-	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
-	orion_eth_init(&qnap_ts209_eth_data);
-	orion_sata_init(&qnap_ts209_sata_data);
-}
-
-MACHINE_START(TS209, "QNAP TS-109/TS-209")
-	/* Maintainer:  Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-	.boot_params	= 0x00000100,
-	.init_machine	= qnap_ts209_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
-MACHINE_END