Merge branch 'master' into for-upstream

Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile

1 files changed, 263 insertions, 215 deletions

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index e703a8d209e..65558d6aa22 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -20,7 +20,12 @@
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
+#include <linux/gpio.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -28,7 +33,6 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
@@ -37,11 +41,12 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
 #include <mach/sharpsl.h>
 
@@ -52,6 +57,61 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long corgi_pin_config[] __initdata = {
+	/* Static Memory I/O */
+	GPIO78_nCS_2,	/* w100fb */
+	GPIO80_nCS_4,	/* scoop */
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
+	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
+	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
+	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
 
 /*
  * Corgi SCOOP Device
@@ -67,6 +127,7 @@ static struct resource corgi_scoop_resources[] = {
 static struct scoop_config corgi_scoop_setup = {
 	.io_dir 	= CORGI_SCOOP_IO_DIR,
 	.io_out		= CORGI_SCOOP_IO_OUT,
+	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
 };
 
 struct platform_device corgiscoop_device = {
@@ -79,27 +140,6 @@ struct platform_device corgiscoop_device = {
 	.resource	= corgi_scoop_resources,
 };
 
-static void corgi_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 {
 	.dev        = &corgiscoop_device.dev,
@@ -112,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.devs         = &corgi_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = corgi_pcmcia_init,
 };
 
 EXPORT_SYMBOL(corgiscoop_device);
 
-
-/*
- * Corgi SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
- */
-struct platform_device corgissp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &corgiscoop_device.dev,
-	},
-	.id		= -1,
-};
-
-struct corgissp_machinfo corgi_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= CORGI_GPIO_LCDCON_CS,
-	.cs_ads7846	= CORGI_GPIO_ADS7846_CS,
-	.cs_max1111	= CORGI_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 76,
-	.clk_ads7846	= 2,
-	.clk_max1111	= 8,
-};
-
-
-/*
- * LCD/Framebuffer
- */
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
-	corgi_lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
-	corgi_lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
-	.change  = w100_lcdtg_init,
-	.suspend = w100_lcdtg_suspend,
-	.resume  = w100_lcdtg_init,
-};
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
@@ -242,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = {
 };
 
 static struct w100fb_mach_info corgi_fb_info = {
-	.tg         = &corgi_lcdtg_info,
 	.init_mode  = INIT_MODE_ROTATED,
 	.mem        = &corgi_fb_mem,
 	.regs       = &corgi_fb_regs,
@@ -268,60 +259,10 @@ static struct platform_device corgifb_device = {
 	.resource	= corgi_fb_resources,
 	.dev            = {
 		.platform_data = &corgi_fb_info,
-		.parent = &corgissp_device.dev,
 	},
 
 };
 
-
-/*
- * Corgi Backlight Device
- */
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static void corgi_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-
-static struct generic_bl_info corgi_bl_machinfo = {
-	.name = "corgi-bl",
-	.max_intensity = 0x2f,
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.set_bl_intensity = corgi_bl_set_intensity,
-	.kick_battery = corgi_bl_kick_battery,
-};
-
-static struct platform_device corgibl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.parent = &corgifb_device.dev,
-		.platform_data	= &corgi_bl_machinfo,
-	},
-	.id		= -1,
-};
-
-
 /*
  * Corgi Keyboard Device
  */
@@ -330,75 +271,35 @@ static struct platform_device corgikbd_device = {
 	.id		= -1,
 };
 
-
 /*
  * Corgi LEDs
  */
-static struct platform_device corgiled_device = {
-	.name		= "corgi-led",
-	.id		= -1,
-};
-
-
-/*
- * Corgi Touch Screen Device
- */
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-static unsigned long corgi_get_hsync_invperiod(void)
-{
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
-	if (!get_hsync_invperiod)
-		return 0;
-
-	return get_hsync_invperiod(&corgifb_device.dev);
-}
-
-static void corgi_put_hsync(void)
-{
-	if (get_hsync_invperiod)
-		symbol_put(w100fb_get_hsynclen);
-	get_hsync_invperiod = NULL;
-}
-
-static void corgi_wait_hsync(void)
-{
-	sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-
-static struct resource corgits_resources[] = {
-	[0] = {
-		.start		= CORGI_IRQ_GPIO_TP_INT,
-		.end		= CORGI_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
+static struct gpio_led corgi_gpio_leds[] = {
+	{
+		.name			= "corgi:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= CORGI_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "corgi:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= CORGI_GPIO_LED_GREEN,
 	},
 };
 
-static struct corgits_machinfo  corgi_ts_machinfo = {
-	.get_hsync_invperiod = corgi_get_hsync_invperiod,
-	.put_hsync           = corgi_put_hsync,
-	.wait_hsync          = corgi_wait_hsync,
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+	.leds		= corgi_gpio_leds,
+	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
 };
 
-static struct platform_device corgits_device = {
-	.name		= "corgi-ts",
+static struct platform_device corgiled_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
 	.dev		= {
- 		.parent = &corgissp_device.dev,
-		.platform_data	= &corgi_ts_machinfo,
+		.platform_data = &corgi_gpio_leds_info,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(corgits_resources),
-	.resource	= corgits_resources,
 };
 
-
 /*
  * MMC/SD Device
  *
@@ -411,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
 
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
 
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
 	if (err)
-		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		goto err_free_2;
 
+	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
+	gpio_direction_input(CORGI_GPIO_nSD_WP);
+	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
+
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+				IRQF_DISABLED | IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING,
+				"MMC card detect", data);
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_3;
+	}
+	return 0;
+
+err_free_3:
+	gpio_free(CORGI_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(CORGI_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(CORGI_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -432,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-	else
-		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
 }
 
 static int corgi_mci_get_ro(struct device *dev)
 {
-	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+	return gpio_get_value(CORGI_GPIO_nSD_WP);
 }
 
 static void corgi_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(CORGI_GPIO_SD_PWR);
+	gpio_free(CORGI_GPIO_nSD_WP);
+	gpio_free(CORGI_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data corgi_mci_platform_data = {
@@ -462,16 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
  */
 static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
-	else
-		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
 	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static int corgi_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void corgi_irda_shutdown(struct device *dev)
+{
+	gpio_free(CORGI_GPIO_IR_ON);
+}
+
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = corgi_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= corgi_irda_transceiver_mode,
+	.startup		= corgi_irda_startup,
+	.shutdown		= corgi_irda_shutdown,
 };
 
 
@@ -483,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+	.cs_control	= corgi_ads7846_cs,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+	void (*kick_batt)(void);
+
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
+	}
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= -1,
+	.kick_battery		= corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+	.cs_control	= corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+	.cs_control	= corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.platform_data	= &corgi_ads7846_info,
+		.controller_data= &corgi_ads7846_chip,
+		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 1,
+		.chip_select	= 1,
+		.platform_data	= &corgi_lcdcon_info,
+		.controller_data= &corgi_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 1,
+		.chip_select	= 2,
+		.controller_data= &corgi_max1111_chip,
+	},
+};
+
+static void __init corgi_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
 
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
-	&corgissp_device,
 	&corgifb_device,
 	&corgikbd_device,
-	&corgibl_device,
-	&corgits_device,
 	&corgiled_device,
 };
 
@@ -498,7 +552,8 @@ static void corgi_poweroff(void)
 {
 	if (!machine_is_corgi())
 		/* Green LED off tells the bootloader to halt */
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
 	arm_machine_restart('h');
 }
 
@@ -506,7 +561,8 @@ static void corgi_restart(char mode)
 {
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
 	arm_machine_restart('h');
 }
 
@@ -515,20 +571,12 @@ static void __init corgi_init(void)
 	pm_power_off = corgi_poweroff;
 	arm_pm_restart = corgi_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
-	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);