summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/irq.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:22 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:22 -0800
commit2ac9d7aaccbd598b5bd19ac40761b723bb675442 (patch)
tree09132a44e33798aaa5e80f10bf025b510015cab3 /arch/arm/mach-pxa/irq.c
parent5ede3ceb7b2c2843e153a1803edbdc8c56655950 (diff)
parentdcf7ec5ee62a78123057a1e286c88ca739717409 (diff)
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
Diffstat (limited to 'arch/arm/mach-pxa/irq.c')
-rw-r--r--arch/arm/mach-pxa/irq.c61
1 files changed, 1 insertions, 60 deletions
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 532c5d3a97d..5dae15ea671 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -22,7 +22,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include "generic.h"
@@ -92,44 +91,6 @@ static struct irq_chip pxa_internal_irq_chip = {
.irq_unmask = pxa_unmask_irq,
};
-/*
- * GPIO IRQs for GPIO 0 and 1
- */
-static int pxa_set_low_gpio_type(struct irq_data *d, unsigned int type)
-{
- int gpio = d->irq - IRQ_GPIO0;
-
- if (__gpio_is_occupied(gpio)) {
- pr_err("%s failed: GPIO is configured\n", __func__);
- return -EINVAL;
- }
-
- if (type & IRQ_TYPE_EDGE_RISING)
- GRER0 |= GPIO_bit(gpio);
- else
- GRER0 &= ~GPIO_bit(gpio);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- GFER0 |= GPIO_bit(gpio);
- else
- GFER0 &= ~GPIO_bit(gpio);
-
- return 0;
-}
-
-static void pxa_ack_low_gpio(struct irq_data *d)
-{
- GEDR0 = (1 << (d->irq - IRQ_GPIO0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
- .name = "GPIO-l",
- .irq_ack = pxa_ack_low_gpio,
- .irq_mask = pxa_mask_irq,
- .irq_unmask = pxa_unmask_irq,
- .irq_set_type = pxa_set_low_gpio_type,
-};
-
asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
{
uint32_t icip, icmr, mask;
@@ -160,26 +121,7 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
} while (1);
}
-static void __init pxa_init_low_gpio_irq(set_wake_t fn)
-{
- int irq;
-
- /* clear edge detection on GPIO 0 and 1 */
- GFER0 &= ~0x3;
- GRER0 &= ~0x3;
- GEDR0 = 0x3;
-
- for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
- irq_set_chip_and_handler(irq, &pxa_low_gpio_chip,
- handle_edge_irq);
- irq_set_chip_data(irq, irq_base(0));
- set_irq_flags(irq, IRQF_VALID);
- }
-
- pxa_low_gpio_chip.irq_set_wake = fn;
-}
-
-void __init pxa_init_irq(int irq_nr, set_wake_t fn)
+void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
{
int irq, i, n;
@@ -209,7 +151,6 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
__raw_writel(1, irq_base(0) + ICCR);
pxa_internal_irq_chip.irq_set_wake = fn;
- pxa_init_low_gpio_irq(fn);
}
#ifdef CONFIG_PM