[ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model

As well as moving all the device declarations to a single one in devices.c
this causes all platforms to register the I/O and interrupt resources for
the AC97 controller.

Cc: eric miao <eric.miao@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Jürgen Schindele <linux@schindele.name>
Cc: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 2 insertions, 32 deletions

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 2564e16e4e2..5d87c7c866e 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -34,6 +34,7 @@
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
@@ -424,36 +425,6 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * AC97 support
- * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
- */
-static struct resource pxa27x_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-static struct platform_device pxa27x_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa27x_ac97_resources),
-	.resource       = pxa27x_ac97_resources,
-};
-
-/*
  * enable generic access to the base board control CPLDs U6 and U7
  */
 static struct map_desc pcm990_io_desc[] __initdata = {
@@ -490,8 +461,6 @@ void __init pcm990_baseboard_init(void)
 	pxa_gpio_mode(GPIO16_PWM0_MD);
 	platform_device_register(&pcm990_backlight_device);
 
-	platform_device_register(&pxa27x_device_ac97);
-
 	/* MMC */
 	pxa_set_mci_info(&pcm990_mci_platform_data);
 
@@ -499,6 +468,7 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_ohci_info(&pcm990_ohci_platform_data);
 
 	pxa_set_i2c_info(NULL);
+	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);